How to Restore Headlights PERMANENTLY

Подписаться 10 млн

Просмотров 34 млн

50% 1

Headlight Restoration using Clear Coat. This video will show you how to clean and restore your headlights so they will never turn yellow or hazy again! You have seen videos on restoring headlights with bug spray, toothpaste, baking soda, and the kits you buy in the store, but all of these methods are temporary and eventually the haze and oxidation will come back.
My method will first make the headlight clear by wet sanding and then put a UV coat on it to seal it in.
Headlight Clarity Updates:
1yr Later: / 8iyextojfm
2yrs later: www.instagram....
Better longer lasting clear coat: amzn.to/2JU2Fap
2000 grit sandpaper: amzn.to/1XqDuhG
Wax: amzn.to/1cxIXj0
Compound polish to remove orange peel: amzn.to/1TtfoOC
Rubbing Alcohol to Clean Lens: amzn.to/3710nAY
Using Bug Spray to Clean Headlights (WARNING!!!): • Using Bug Spray to Cle...
How to use Toothpaste to Clean Headlights: • Headlight Restoration ...
How to Remove Moisture from Headlights:
• How to Fix a Headlight...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: www.youtube.com...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21 тыс.

@prestonsserious 5 месяцев назад

Its been 5 years my jeep is finally back yellow lasted so long cant thank u enough gna sell it after i do this magic to its headlights again at 290000 miles itll go for 2300 bucks 😊

@chrisfix 5 месяцев назад

Glad to hear the real life experience! Mine lasted about 5yrs as well!

@nathanmartins5543 5 месяцев назад

@@chrisfixAre u able to drive the car while waiting the 24 hrs for the clear coat to dry? I wouldn’t be able to let the car sit for 24 hrs straight, would it still come out the same if i just wet sand and wax after the 24 hrs?

@a7aKRD 5 месяцев назад

@@nathanmartins5543 i would'nt drive since the clear coat hasn't dried up yet and if dirt and rocks hit the headlight it will look scratched up

@A_Sailors_Prayer 4 месяца назад

Bout to use this to get past a road worthy in Australia Cheers mate!

@73caprice 4 месяца назад

I did this five years ago and it’s starting yellowing again. I don’t have any clear coat left so I just waxed it after wet sanding with 1500 and 5000 grit. Looks great

@SandumXD 3 года назад

This video is almost 7 years old now, and ChrisFix still respond to comments. What a legend!

@MasterGaming-el7jx 3 года назад

Tru

@bear9039 3 года назад

You can see him in the paint

@justaLegend69420 3 года назад

Legend boi

@THXIIIRTEEN 2 года назад

This comment is 7 months old now.

@justaLegend69420 2 года назад

@@THXIIIRTEEN lol

@sploekgriffy1402 7 лет назад

If you do this on a PT Cruiser, it increases the value by 11 dollars

@brandonpennock9381 7 лет назад

Sploek Griffy i have never laughed at a reply before I read this one

@archieunlmtd3206 7 лет назад

Made my day!

@klvAcosta 7 лет назад

Sploek Griffy lmao 😂

@richishere82 7 лет назад

Sploek Griffy but it cost 20$ to buy the stuff. 😂

@Ewadun 7 лет назад

I recently went to Walmart and spent $13.55, 99cents Store items included.

@peggydawson6716 5 лет назад

Chris, can't thank you enough for your videos. I am 67 yrs. old and a widow so I have to do things on a limited income. Thanks for explaining why things are done and in easy instructions to follow. You are my go to guy for my 1997 Dodge Ram 4x4.

@voteqwerty 5 лет назад

Peggy Dawson 👍👍

@bobbg9041 5 лет назад

That's your first mistake DOGE! If it says DOGE on it RUN AWAY...... I don't know why you ahve to Doge a car that always in service broken down.

@chasealexander9263 5 лет назад

bobbg stay in school

@Datsun7705 5 лет назад

bobbg 97 dodges are better than the newer ones

@stopchangingmynameyoutube 5 лет назад

keith schaedel hey Keith get bent

@mariosaccoccio1688 2 года назад

I followed these directions about 6 years ago, and the lights still look great! I also did the fog lights! Thanks, Chris!

@jdsguam 2 года назад

Well, I am now officially motivated - 6 years is a long damn time.

@mimos7214 Год назад

@@jdsguam How is it going

@juaquiqui-kun4333 Год назад

@@jdsguam That's enough time for the headlights to get 100k miles older or more, and still look the same from when he first restored them

@robertl955 Год назад

For everyone else, go watch any other headlight restoration "how to" video. This one has dated information, you don't leave the headlight rough so the clear coat can "stick" lol. The smoother it is the better it will look.

@mariosaccoccio1688 Год назад

@@mimos7214 Van is still on the road & the lights still look clear. There is a slight haze in one spot on the "top" of the lens, but overall, it's still looking good! The fog lights were pitted before & are still pitted, but clear, although they don't get much sunlight exposure.

@JT9K 3 года назад

I literally just did this yesterday to the headlights of my 2009 MKS, and it came out PERFECTLY. Thet dealership wanted $800 for EACH new headlight!! ChrisFix, you're a godsend 🙇 Much Thanks to you

@freezee7547 3 года назад

He’s an alien and genius. Me, We’ve learned so much from his channel and DIY fix the things with the reasonable cost ever. Respect to Chris-fix, forever! And say no more dealerships! Yeah... xD

@JoseRodriguez-ob2ge 3 года назад

$800 for each!!!!!?????? 😳😳😳😳 What the ........

@solomonstello 3 года назад

You saved some serious money doing it yourself! DIY is where it's at!

@renenava5213 3 года назад

800dls per light??? 🤣🤣🤣🤣🤣🤣🤣

@kingofsludge7262 3 года назад

How has it stood up?

@chitwnyawdman Месяц назад

10 yrs ago i didn't know how to locate an alternator, a caliper bolt, a coil pack.....i knew almost zero about cars, yet i drove them well. 10yrs later I've done over 30 plus brake jobs, replaced ac parts, fixed heating system, modified exhausts, installed several suspension upgrades, upgraded brakes to brembo calipers, replaced several wheel hubs, painted 2 cars, installed racing seats, minor transmission repairs, flipped a few cars, helped several random strangers with minor repairs...this faceless dude who says "soapy woder" gave me the confidence to entire the world of DIY...saving myself 1000s over the years. I remember when he was at 300k subs. You're a boy now. You've helped millions. Thanks a million Chris!

@photony Год назад

I’ve done this twice, probably 4 years apart, on my 2004 4Runner. An hour of work to make it look way better and brighter/safer lighting. Thanks, Chris, this works so well!

@rmatt53 Год назад

As others have recomended always go with SYLVANIA Headlight Restoration Kit. Shits the best on the market, and I can't recomend it enough.

@majorburke9735 Год назад

I did this twice too on my 2004 Camry. But it didn’t make it much better. And it got worse quick. I think once the plastic “yellows” it’s too late.

@UpNorth2000 Год назад

What brand clear did you use?

@sweatshopkids Год назад

You've had to do this twice on the same car? The video claims it's permanent.

@steveq4178 Год назад

@@sweatshopkidsit lasted 4 years though even when you buy the car new they eventually haze so don’t get your point.

@jayajay6622 5 лет назад

Last Tuesday my daughter and I attempted to refurbish the headlights on her 2007 Camry. We followed your technique step by step. While the wet sanding had us a bit worried at the beginning, the end result was brilliant. Thanks so much for sharing this adventure and I want to let you know that our “High Five” upon completion felt soooo good!

@lockergr 5 лет назад

That's great! About to do my 07 Camry as well. Did you use the Meguiar's G12310 PlastX Clear Plastic Cleaner & Polish, 10 Fluid Ounces he recommends? Not sure how that step works.

@xzcrzykiller7055 5 лет назад

lockergr I’m thinking about doing this. Did you use the polish? If so how and what step do I do that?

@lockergr 5 лет назад

XZCRZYKILLER I've not done it yet so I can't say. Will try and update once I do. But for my understanding it should be used after the clear coat spray. It's supposed to get the orange peel off which I guess is the flakiness in the clear coat.

@xzcrzykiller7055 5 лет назад

lockergr ok thank you please do try to keep me updated.

@debbievidal9536 5 лет назад

I've just tried this and the headlights are still hazy

@brandoncriner5480 3 года назад

I'd recommend adding this in the description so it's easier to know what the steps are: 1. Tape around headlight 2. Wet sand 400 grit swirl pattern 3. Wet sand 400 grit horizontal pattern 4. Wet sand 600 grit swirl pattern 5. Wet sand 600 grit horizontal pattern 6. Thoroughly clean 7. Wet sand 2000 grit swirl pattern 8. Wet sand 2000 grit horizontal pattern 9. Thoroughly clean with alcohol and let air dry 10. Tape plastic bag around area of headlight 11. Spray 1st coat clear gloss UV rated 12. Wait at least 5 minutes 13. Spray 2nd coat clear gloss UV rated 14. Wait 24 hours 15. Apply Carnauba car wax 16. Buff out wax 17. Remove taped off material

@rmcvyp8633 3 года назад

clear coat for PLASTIC

@VaperWare 2 года назад

You missed the 3rd clear coat

@soonerdave22 2 года назад

Thank you!

@tonycervantes4816 2 года назад

Why use of 2000 grit after 600 grit ?? Brandon .

@brandoncriner5480 2 года назад

@@tonycervantes4816 Because you always go to a finer grit

@nunayobusiness7521 4 года назад

i love how even after 6 years chris still replies to comments on this video, thats dedication! =)

@st.michaelthearchangel7774 4 года назад

Yes!

@Nub00005 4 года назад

Dude I thought the same thing. He is truly super humble and is so great full to be where he is.

@cosmicchairs 4 года назад

But he promised us to show how to clean car interior .... And no video yet:(

@codalexxs2864 4 года назад

lmao he still hasn’t noticed yours

@chrisfix 4 года назад

Of course!

@Mademanmagic 16 дней назад

As a pro detailer. There is no such thing as permanent headlight restoration, but it’s cool to run across your diy video you seem pretty good at this stuff bro. GGs👊🏾🔥

@chrisfix 16 дней назад

Thanks! These headlights lasted years and didn't need any maintenance so I'd call it pretty permanent

@Mademanmagic 16 дней назад

Yes considering the average person keeps their car for 3-5 years for them it will be permanent you are absolutely right on that part. I meant more in a technical way that eventually it will oxidize just like the OEM UV coating due to the build quality of modern cars.

@Mademanmagic 16 дней назад

@@chrisfix the only thing bad about this stuff in my opinion is that it is much more difficult to sand off than your standard clear coat like meguiars because of the hardener. It also doesn’t allow the headlight to expand and breath properly if you live in the more harsh conditions that go from 40 degrees to 88 the next day. Obviously that’s just my experience :) keep making banger vids brotha🫶🏾

@dugwayrd 5 лет назад

I did this to two vehicles recently. The price to replace the set of headlights was $350, this made the headlights look amazing for less than $20. Thank you sir!

@chrisfix 4 года назад

Awesome!

@polishmafia1573 4 года назад

Did this actually work? I’m extremely nervous to do this... how long will this also last? I don’t get how using sandpaper which scratches it is a good think and then somehow magically the clear coat does it lol... just hard to believe.

@josegomez6549 4 года назад

@@polishmafia1573 then maybe don't do it lol. If you don't understand how it works then it's not for you..

@piergiorgiocestra3833 4 года назад

Have you used plastic primer before spraying the clear coat layers? The product that Chris used says that it bonds on plastic, mine doesn't and I'm scared it may look like crap...

@pierre4857 4 года назад

@@polishmafia1573 sandpaper removes the haze..by scratching it away, clear coat fills the scratches and adds a protective layer..lol

@starlight7365 3 года назад

I subscribed just because Chris still replies to comments even after 6 years.

@chrisfix 3 года назад

Welcome aboard! And I spend 4 hours every day reading and responding to you guys!

@マナンサラケイトリンロズ 3 года назад

@@chrisfix woah that's crazy. You must be that type of person who has a schedule for every thing.

@christianbrooks1079 3 года назад

@@chrisfix can we get a timing belt video? 😁

@aaryabhardwaj9255 3 года назад

Same and because i want to see more bmw car thing he is doing currently

@prismadiaz1121 3 года назад

Same !

@Elizabeth-qf6uz 2 месяца назад

Thank you so much for this video!!!! It’s Currently July 2024. My old 2007 Yukon headlights were foggy and yellow. I found this video when I was googling how to fix the headlights and figured worse case I would just have to get new headlights. I bought everything at Walmart the other day and just finished the clear coat. I’m so proud of my work I texted videos and before and after photos to my family. I’m a single mom and I’m so thankful you for your step by step tutorial that anyone can do. 💜

@kennithjaramillo6408 6 лет назад

Hey Chris, the thing that I love most about your channel is that even though this video is like what, 4 years old, you are still replying to people’s new comments. That shows commitment and it also means you care. Keep up the good work buddy! People care about your videos! (Especially me)

@chrisfix 6 лет назад

Thanks Trey! I do my best to answer as many comments as I can!

@m2rkiller 6 лет назад

Yeah, or maybe replying still because of the bull shit that's still continuing to get out to people!

@Dark_Lantern_ 6 лет назад

Matt Rivera or may be just it's because he likes reading a bunch of comments (like a lot of normal people do) and sometimes replies them just for fun. I'm pretty sure he's making this videos for fun too, so I bet he enjoys reading critiques and compliments about him.

@JackLoPinto 6 лет назад

Trey to add to your comment when it comes to a good video production "content is king" and when it is good information (like Chris presents) it will be timeless. In other words have a long shelf life out there. Take this subject matter for example the headlight lenses used to be made out of glass and if they still were we would not be having this discussion. But they were limited to a round or rectangular shapes. When the plastic design came out, all these new sleek molded designs started happening. Removing the headlight from just being stuck in the grill to actually evolving and incorporating the lenses aerodynamically into the body design and the fender. With awesome flexibility and creativity came one chink in the armor! The plastic surface is softer and more porous then glass and it is not impervious to UV or the sun damage as the glass lenses were. So I think Chris's choices for topics I feel come from our asking questions about current timely issues that we are currently experiencing.....and one of them is our plastic headlight assembly's are failing due to time and the elements. Sorry that was more then 2 cents worth but Chris you have inspired this old dog to possibly jump ship from my current mundane career of working for the man and starting my ownmobile detail business.!

@TanNguyen-yg5hw 6 лет назад

Trey Jaramillo jeery morning no goodbye

@getsmarter5412 3 года назад

Hey- I did this 5 years ago, and now they're starting to fog up again. Actually I'm happy with the results, I came back as a refresher before I do it again- I even still have all the materials. Thanks!

@chrisfix 3 года назад

Thanks for sharing!

@kingofsludge7262 3 года назад

How well did it hold up?

@jimflys2 3 года назад

Yes, that is about what you can expect. Consider the superior products that are applied from factory supplied headlights. They go yellow. Nothing lasts forever and all finishes are but temporary, but it is better than just buffing. A good 2K clear spray might be a better option as it is a catalyzed finish, but it is expensive and you must wear a proper respirator and not a dust mask when shooting it. Maybe get another year or two out of the finish over the airdry non cat finish.

@un.gatocurioso 2 года назад

5 years is pretty good

@gravemind6536 2 года назад

Keep waxing them every 3 months and you should avoid them fogging up again. Only so many times you ca restore them.

@scatcat1994 7 лет назад

I reckon in just a few videos this guy has increased the value of my bike by a few hundred dollars, many many thanks.

@chrisfix 7 лет назад

Awesome! That is what I like to hear!

@michaelolson571 Год назад

Chris, you are the man. You've given me the confidence to try so many of these fixes that I never have before. You're an amazing teacher and awesome film maker. Thank you for all that you do.

@gravemind6536 9 месяцев назад

I did the headlights on my Mums car in 2020 (Had lots of time in lockdown) they were arguably too far gone and far worse than the ones in this video, I used his methods and was able to remove all the haze from the lights but they had also yellowed badly too but I only managed to remove 85-90% of the yellowing. However 3 years on from the work I did they still hold up and for around 100-200 dark miles until my Mum got used to the headlights being brighter she kept trying to turn off the full beam that wasn't on. This was a car she had bought cheap used for £600 so its pretty crap however I completely transformed the lights.

@airviator9194 5 лет назад

Surprised that he didn't use soapy wooder

@crystalsnekk1022 4 года назад

nice :D ;D

@AbolfazlMirzaei 4 года назад

soapy wooder didn't exist then. :-D

@jerryray3228 3 года назад

Wooder

@florret2003 3 года назад

@@jerryray3228 That requires the use of a tree.

@kingkevin88888888 4 года назад

A random guy at my local salvage yard told me to take these exact steps to permanently clear up my headlights and it works just as in this video. Great step by step how to.

@chrisfix 4 года назад

That's awesome! Thanks a lot!

@airrolmedestomas 3 года назад

Im afraid to scratch the headlight with sand paper .it is ok sir?

@philipgligorov5848 3 года назад

@@airrolmedestomas if you scratch it a little bit with the 400 grip ir 600 grip just sand it with 2000 grip over the scratch and it will disappear

@gravemind6536 2 года назад

@@airrolmedestomas Don't be scared of that you will likely be fine and using sandpaper even with sub 1000 grit will not cause irreversible damage. As long as you polish the lights up well after sanding them they will last good.

@s743af 7 лет назад

I tried a number of products to get the headlights on an older car we have clear again... with no success. They always clouded up again. We just decided not to drive it at night anymore and then I found your video and thought it was worth a shot. My 15 year old took one headlight and I did the other. It was quality time for us both and fun at the same time. The results were AMAZING! We were just hoping it would stay that way. BTW, I waited until 6 months elapsed before commenting and I'm happy to say this process works... permanently!! Thanks for posting this video and for instructions which were very easy to follow. My headlights are bright again and it didn't cost an arm and a leg. Outstanding!

@LibtardsTears 25 дней назад

Is it still working?

@tomgoffnett5624 Год назад

I've been on the internet since the early 90's and this is the best instructional I've ever seen, heard or read. Nicely done. I had exactly zero questions after watching this instructional. Just saved me 400 dollars.

@bigtimepimpin666 4 года назад

If you want to double the value of a PT Cruiser, fill up the gas tank.

@KenBuscho42 4 года назад

Or, how about: "I'd like some wiper blades for my PT Cruiser?" "Sounds like a fair trade, here you go."

@Luke_Segovia 4 года назад

Lol I was wondering why he even had one

@ForeverStarWatcher 4 года назад

My former employer had a pt cruiser for employees to drive, everyone called it the pt loser cruiser

@onusgumboot5565 4 года назад

Too funny. My wife had a PT. I hated it. A drive of more than 10 miles was torture. What a piece of crap

@PM.0000 4 года назад

LOL.

@MrMills-rs4zg 7 лет назад

I just did this on my 350z, WOW what a difference. Small tip is when you move on to the 2k grit, sand until it seems clear while youre sanding, I.E. you dont see much haze while its wet. Learned that the hard way.

@MiLLz830 7 лет назад

Mr. Mills I messed up, the clear coat got bubbly and peeled. do I have to start over or just add wax

@MrMills-rs4zg 7 лет назад

Black Titan I would re-sand it. I didn't sand my right one enough with the 2k grit the first time so I went over it again with the 400 then 600 then spent a lot of time on the 2k. After re doing it the light looks great. I would re do

@MiLLz830 7 лет назад

Mr. Mills I only have 600 and 2000 grit, should I start from the 600 grit and up. would that be enough to get the clear coat off completely?

@MrMills-rs4zg 7 лет назад

Yea you should be fine

@бисноват-в3ъ 7 лет назад

Mr. Mills Did you also respray them with clearcoat?

@mccarthermitchell2873 7 месяцев назад

Did this process today on some 7 year old headlights that were plain awful. I messed up a little on the 2nd coat and had to restart but the end result, following Chris' step by step instructions, gave me brand new looking headlights. I can actually see at night now.

@topixartist 4 месяца назад

By restart do you mean re sand?

@mccarthermitchell2873 4 месяца назад

@topixartist when I applied the 2nd top coat, I touched it with a towel, and it bunched up and crackled. So yes, I sanded it back down with sand paper and restarted the whole process

@topixartist 4 месяца назад

@@mccarthermitchell2873 happens to me but when I sanded it down again the crackles were still there somehow

@moonlightninjaman 4 месяца назад

Yeah ive got crackles now. Not sure how to prevent this. Any tips?

@fishinforlikes1611 3 месяца назад

@@moonlightninjamanI just botched my clear coat as well. Tried sanding it down and I think I did it too soon or not enough sanding. Trying some varsol (paint remover) now and will update you if that gets rid of the crackle. Update- varsol didn't do much...sanding is the way to get the crackle to disappear. Lots of sanding lol

@robertbeauregard7157 Год назад

Thank you Chris. My 2008 MDX failed inspection due to yellowed/hazy headlights. Less than $50 at an auto parts store, and 30 minutes of my time, my headlights look brand new. Can't wait for 24 hours to do one more wet sand and then wax. You are a real treasure.

@gravemind6536 9 месяцев назад

I did this to my Mums cars it somehow had a valid MOT with the lights only being advisory and they were very far gone arguably too far gone I restored them but could only remove about 90% of the yellowing and haze I did this in 2020 whilst bored in lockdown and she was highly impressed with the headlight performance afterwards and kept trying to turn off the full beams due to the new levels of brightness. 3 years later the restoration is still holding up very well too. I used 5000 grit and 7000 grit sandpaper followed by T cut polish and turtle wax to restore them I imagine if I used better equipment I would have done even better.

@JohnNorris411 7 лет назад

I actually did this today on our truck. I was always polishing it with toothpaste every couple months to get a somewhat clear non yellow lense. Today I wet sanded with 600 - 1200 - 2000 - 3000, then alcohol wipe. Taped it off and put 3 passes of Krylon Color Master acrylic crystal clear with durable cover max technology (quoting the lable) and later in the day after it all dried nice I finished it off with a quick coat of carnauba wax. It came out awesome, crystal clear, looks like a brand new Glass Lense. I was using the clear coat from a previous project and they did not have any non yellowing clear coat at my local shop, so will have to order a new can from amazon, so for now I will be driving with one super clear lens and one yellow faded out lens. But this really does work great and is super easy.

@colemanmerrill 7 лет назад

John Norris I just did mine and I'm waiting to 24 hours for it to dry. It doesn't look super clear after I sprayed the clear coat on, do it dry clear after the 24 hour period?

@JohnNorris411 7 лет назад

Mine got clearer as it dried but looked pretty clear pretty quick. Should be noticeable right away.

@JohnNorris411 7 лет назад

I did finish both headlights on that suv then l did the same to my other truck. They all look good.

@JohnNorris411 7 лет назад

After it dries if it does not look clear, maybe you got the wrong clear coat? I know they have some that are opaque. you can always try more coats to see if that works.After it is all dried, you can also try applying a polishing compound like used to polish your car. to smooth out the finish more. Finish it off with a wax like carnuba wax to help protect the clear coat as it is not as industrial or durable as the clear coat on your paint job. They do have some heavy duty clear coat spray paints out there that have a hardener added to the paint that will last much longer. these cans have a button on the bottom that you depress, this releases the hardener into the clear coat in the paint.

@RPDBY 6 лет назад

mine is also in small cracks all over the headlight after clear coat

@Amyzgr8r 2 года назад

I'm amazed!!! Update: I actually did this and the results were fantastic! I can't thank you enough for all the empowerment you provide. God bless you!

@kimberchick8527 2 года назад

Awesome. I've been looking for comments on if someone had done it. Thanks fore saying something! I'm about to do it on my Santa Fe.

@Amyzgr8r 2 года назад

@@kimberchick8527 He inspired me to change my own headlights, tail light, interior light, and that AC filter that's under the hood (I already knew how to replace the cabin one). I even used this headlight recovery trick on the faded solar lights around my property. ChrisFix is truly my hero!

@jlkeeper8901 2 года назад

@@Amyzgr8r hey Amy, every time you sanded, did you do 5 minutes each time or how long?

@Amyzgr8r 2 года назад

@@jlkeeper8901 Oh, I didn't really time it. Just eyeballed it.

@RPDBY Год назад

Ive done this using the same clear coat and it all was in spider webs after 10 minutes. Did three coats and that did not help a single but. Then talked to a professional, they said need a plastic adhesion promoter, used that (doing everything form scratch again), this time the clear coat did not have the spider web, but the headlights are hazy and dont look "amazing". Now when i rewatch the video i realize that his headlights are hazy as well, it is just his comments that made me think they did look great.

@kcmaldonado3948 4 года назад

I'd go through all of this and my transmission would then go out or something.

@Attachments. 4 года назад

Kevin Cody thats how it is lol

@mathewboyd903 4 года назад

Man I feel your pain, that really sucks man. I hope things get better for you :)

@The_oli4 4 года назад

luckily he has a video on that too :P

@brittenialee7765 4 года назад

Lol

@Ryan_Carder 4 года назад

This is why I went w year and a half without fixing my AC

@RJ_Last 4 года назад

Quick Tip: If you're lazy like me, wait until its raining hard outside and then start the sanding part.

@teagueappleton5674 4 года назад

haha good one

@lalamorena22 4 года назад

🤣🤣

@dadosmtherealones7814 4 года назад

lol work smart not hard 😂👏🏾

@loganonamac7 4 года назад

@Jeremy K Tape it beforehand, and then pray it starts raining soon enough.

@toyahill299 4 года назад

lol

@mikhailzamorano8796 8 лет назад

I don't think a PT Cruiser has a value.

@jrmaster032096 8 лет назад

Lol

@Drives31forhalo 8 лет назад

+mikhail zamorano lmao, you couldn't pay me enough money to make me drive one of those.

@justjordan6560 8 лет назад

thats why he used this as a test car

@pcno2832 8 лет назад

+mikhail zamorano People made fun of them because they were seen as sort of a "fake antique", but they were about the best small car Chrysler ever made (not saying much, I realize). I'd rather live with a PT Cruiser than a Neon.

@Waxxumus 8 лет назад

+mikhail zamorano you mean they recalled all of them because their breaks go out completely above a certain speed.

@cl868 7 лет назад

Holy shit fam dude your a blessing like fr some guy tried to get to pay him $30 for cleaning my headlight one for $7 I doubt they wear permanent this is just a life saver thank you . I'm on your notification squad now

@chrisfix 7 лет назад

Glad the video was helpful and welcome aboard!

@mariosaccoccio1688 Год назад

I De-fogged the headlights on my wife's 2013 Corolla yesterday and it came out great! More importantly, the lights on my Caravans, done years ago, are still looking great! Thanks, Chris!

@chrisfix Год назад

Nice work and glad the video was helpful!

@gravemind6536 9 месяцев назад

I told my Mum during lockdown I was going to sand the headlights and polish them on her 2005 MK5 Golf she said whatever and was not interested I was bored and just gave myself the task. When she next drove the car in the dark she was shocked and told me she keeps trying to turn off the full beam. She was very pleaseantly suprised with what the work did.

@LadySkippy 4 года назад

Just tried this on my old Toyota Corolla. The lights were so hazy that I didn’t feel comfortable driving at night as the lights had gotten so dim. This method worked perfectly ! They turned out so nice. Thank you so much for this video.

@Nikkk6969 4 года назад

Same for my ugly 99 Camry, and wow do clear headlights do a lot to the appearance!

@devinbishop1882 7 лет назад

Honesty THE best how to RU-vidr by far!!! Thank you chrisfix

@chrisfix 7 лет назад

Thanks a lot!

@robertsills2519 3 года назад

Chris, I appreciate the time and effort you put into make these video's available to your viewers. They are always very informative, clear, concise and to the point. Because of your expertise and the way you present your video's, you make it look easy and inspire novice like myself to give it a try. Keep up the good work, it is much appreciated!

@OGRH 5 месяцев назад

This channel is not only one of my top 3, as far as usefulness goes I could probably say Chris is my number one favorite creator on all of RU-vid! This guy is genuinely a national treasure! Much of this stuff, I already know, but all of it includes subtle details That can save every day people looking to improve the quality of their lives thousands of dollars. Please don't ever stop doing what you're doing or the way that you're doing it. You have the perfect theme, subject matter, & layout. Nothing you're doing will ever get old, or fall out of favor. I've been following you for a very long time & the day you stop making RU-vid videos, I'll know this platform Is obsolete.

@OGRH 5 месяцев назад

I guess what I'm saying is thank you for everything!

@DeliDel215 4 года назад

I swear Chris Fix you have helped my detailing business so much man you are the goat 🐐 💯

@JR-mk6ow 6 лет назад

I've done that 3 months ago. Still looking good. My dad was impressed, thank you very much

@rngcatastrophe5749 6 лет назад

😂

@chrisfix 6 лет назад

Awesome glad to hear it!

@jhgaming4818 6 лет назад

Yo dude

@lostintime8651 6 лет назад

Mine is dead and there was never ever any way to impress him.

@jomardeusexmachina2145 6 лет назад

any news on how it looks now after 8months? im interested to do the same.

@kherielthecereal8000 5 лет назад

Thank you so much!! Saved me $80. Now when I was applying the clear coat, I turned all the headlights to heat up while applying the clear coat, which prevented the orange peel

@braydenhaines5456 5 лет назад

KherielTheCereal Wow wish I read this before I sprayed the clear coat. I’ve got a lot of bumpy orange peel that I have to sand down and refinish

@jaywholoveseveryone1721 5 лет назад

DANG IT! Wish I would have read this too! Now i have to sand but, it's OK. Still grateful for ALL information ♥ .•:*¨¨*:•. ♥

@a.j.9727 5 лет назад

Heated headlights? That's a thing?!

@TheBestGames974 5 лет назад

@@a.j.9727 I think he ment the natural heat that the lightbulbs put out. Especally xenon lights. They warm up the surface nicely.

@a.j.9727 5 лет назад

@@TheBestGames974 I'm aware 😉.

@stevencherry1396 3 месяца назад

I’ve tried several different headlight restoration kits and none of them gave me good results. I stumbled across this video and decided to give it a try, and this method works really well.

@chrisfix 3 месяца назад

I'm glad this method worked well for you!

@AaronHollander314 5 лет назад

Girl, are you 2000 grit sandpaper? Because you're Super Fine! ~ Chris Fix

@chrisfix 5 лет назад

Hahaha how did you know that’s my pickup line?

@technopanda1018 5 лет назад

ChrisFix lol

@iregretnothing2045 5 лет назад

@@chrisfix 😂 badass!

@timothyleger4385 5 лет назад

That's "CRAZY SUPER FINE !"

@wilborth5th 5 лет назад

Awwww girls go like awwww!!!

@yoisyoudeadass 5 лет назад

Girl: you're from Jersey right? Say that thing again. Chrisfix: *whispers* "Wuater"

@temp-9265 5 лет назад

Wooder*

@MoreKnowledgeShorts 5 лет назад

lmao

@Gideon_Judges6 5 лет назад

Never get the soapy wooder too close to the electrizzity

@milkspiller99 5 лет назад

My brothers met chris at a autozone in old bridge nj

@knowledgewind 5 лет назад

Joey R. Get her a black guy she'll love you forever...

@2.0_brittt 3 года назад

I thought pt cruisers come stock with foggy headlights

@chrisfix 3 года назад

Lol I mean the bumper came stock with tape lines so I’d believe it

@elimorse5760 3 года назад

Very helpful, thanks!

@tinyhotopicbitch 7 лет назад

The PT cruiser is good practice in case you mess up you just take it to the junk yard.

@13kkempton 7 лет назад

Oh ppulleeez!! I love the "my car is better than your car". I have owned 3 and each lasted 200k + miles. Great compact in the snow, the turbo has 225 horses and still running strong. Good car that Plymouth just decided to make is less so year after year until it's elimination. Chevy, now there is a company that made trash for years and years and just now coming back a bit.

@rbreeze789 7 лет назад

spudnic88 my neighbor used to have a purple pt cruiser with wood paneling on the side 😷

@SugaryCoyote 7 лет назад

Or drive it off a cliff and go about your day

@MK-ex4pb 7 лет назад

Brett Werner is amazing how hated these ugly pieces of shit are

@bxtboi 7 лет назад

spudnic88 XD

@UncleFranke 2 года назад

Chris - this video is excellent. My 2007 BMW Z4 had some mildly oxidized headlights. I started with 600 grit and soon to that someone had tired to correct these before (I’m the second owner). Once all of the sanding was done and I had a nice even haze I shook the clear coat for a good 2 minutes. I carefully applies VERY light coats, waiting 10 to 15 minutes between applications. After 3 coats I checked for uniform, even coverage. I then applied my last coat and waited overnight to remove the tape and bags. Wow! Just beautiful. Pure carnuba wax was carefully applied and removed. The results are spectacular. Thanks Chris - I WAS nervous sanding, but I trusted you and the results exceeded my expectations.

@BronxBull1922 7 месяцев назад

How long did you wait to apply wax?

@vc96 4 года назад

This was helpful, here's the summary: 1. Put masking tape all the way around both headlights. Don’t leave paint around lights showing. 2. Spray headlight and 400-grit sandpaper with lots of water. 3. While keeping surface wet the whole time, use sandpaper to swirl in circular motion. Don’t push too hard. - Milky colour will run, which is fine. - Make sure grooves are done around the edges 4. Finish by sanding horizontally. Include grooves. 5. Do steps 3-4 with 600-grit sandpaper. Slightly more pressure than before. 6. Use water and paper towel to wipe off the headlight. 7. Do steps 3-4 with 2000-grit sandpaper. Not too much pressure. 8. Repeat step 6. 9. Use alcohol on paper towel to clean it off. Leave to dry. 10. Use garbage bag to cover the front of the car around the headlights. Tape it down to the car nice and tight. 11. Push down bag over headlight. Lift up slightly, then cut a hole around the edge of the headlight. It can be slightly bigger, but not bigger than the masking tape. 12. Tape the inside of the headlight hole tape to garbage bag. 13. Repeat step 9. Do not touch from this point on. 14. Once dried, use light and fast sprays of clear coat over the headlight. Cover lightly twice: up to down, down to up. 15. Let dry for 5 minutes. 16. Repeat step 14. Make sure grooves are sprayed too. 17. Let dry for 5 minutes. 18. Repeat step 14. 19. Let it dry for at least 24 hours. More is better, up to 7 days. Do not drive car during this time. 20. Remove garbage bag cover, but not original masking tape around headlight. 21. Do wet sand to remove orange peel: 2000-3000-grit wet sand in the same manner as steps 3-4. Can repeat more if needed while increasing in fineness. 22. Dry. 23. Use car wax on microfiber towel and swirl it around. 24. Leave on until it hazes. Once it does, buff it out (wipe using clean buffer). 25. Remove rest of tape.

@ethanlindo9246 4 года назад

Nice bro

@easyengines9764 4 года назад

Thanks

@AlexSchwartzATV 4 года назад

I have a 3m kit and it doesnt say to wet sand for the first two rounds of sandpaper. will that make a difference?

@vc96 4 года назад

@@AlexSchwartzATV I dunno chrisfix suggested wet sand for every time you sand it here so...not sure how it'll work if you don't

@robthewaywardwoodworker9956 4 года назад

@@AlexSchwartzATV I would wet sand every time, especially on plastic. The water helps avoid build up of material (in the sandpaper) that is coming off the headlamp and makes the sanding much more consistent over the entire surface.

@sharkvshark 6 лет назад

After 3 coats of clear gloss... There is some haziness from paint I believe. What shall I do to get absolutely clear glass now?

@chrisfix 6 лет назад

Wait a few days for the paint to harden and cure. Then wet sand with 2000 grit so it is uniformly hazy. Then move up to 3000 grit, then 5000 grit and then use a polish like this and buff it until crystal clear: amzn.to/2sJbZXk

@sharkvshark 6 лет назад

Can a wax be used instead of this polish?

@wabashstudio 6 лет назад

Buy a new headlight if you want perfectly clear glass.

@bernardoojeda5295 6 лет назад

wabash that makes no sense because headlights are plastic and the glass ones don't haze

@CLAY-DON 6 лет назад

sharkvshark i

@freddyjimenez2632 5 лет назад

Can you restore the relantionship with my girl?

@theyemenipatriot8020 5 лет назад

Chris Fix can do anything!! 😂

@vlad.iulian3540 5 лет назад

Try polishing her

@TheChukyto13 5 лет назад

lol

@freddyjimenez2632 5 лет назад

@Alex Jay chill man it was just a joke

@freddyjimenez2632 5 лет назад

@Alex Jay srry i didnt see that lol

@Sparky62764 2 года назад

Just done this to a older car that I seriously thought I was gonna have to buy new headlight assembly and decided to try this, after doing this it literally looks like I put new headlight assemblies in, what a difference this made, great video and thanks for sharing

@dennisdedios8975 5 лет назад

Awe man no soapy wooder in this one?

@erikzajcew 5 лет назад

I have done this technique one three different cars and it has worked really well. The first one I did three years ago and now, the clear coat is starting to yellow and come off. I love this channel and think Chris is awesome but this technique is definitely NOT permanent. It’s by far the most effective and longest lasting treatment under buying a brand new headlight. I’ve used other DIY techniques and even rainx (etc) kits but nothing worked as well. Another great thing about this is that you will have that can of clear coat for every touch up you’ll need in the future. You use such a small fraction of it.

@alsouthern7190 5 лет назад

I did this to my tooth, now i have a beautiful smile!

@bendover8250 5 лет назад

Al Southern I would use cape cod cloth on a gold tooth

@robloxminecraftgamer-0-578 5 лет назад

Me to

@rus4play 5 лет назад

@Skitungen 5 лет назад

Copy cat

@kammyc1573 5 лет назад

🤣🤣🤣🤣🤣🤣

@vikingwind25 2 года назад

I just did my 2010 CRV and 2000 Explorer using this process. Works great and is easy to do. Beats the expensive Sylvania, Mothers and other kit methods out there today. Thanks Chris!

@chrisfix 2 года назад

Awesome! Glad the video was helpful!

@jandjsgunchannel449 7 лет назад

The very day this video came out I coated my headlights in about 12 layers of clear coat. Today, after about 2 years the clear coat is finally starting to peel off. My headlights were crystal clear the entire time. I live in the coast of california where we are plagued by yellow headlights. Not me though! Thanks Chris Fix!!!

@davidpadilla8092 3 года назад

Hey Chris, I just did this and you saved me a couple hundred bucks plus the time to replace headlights that didnt need to be replaced. Thank you and I can send pics if you want them. Have a happy new year bro!

@chrisfix 3 года назад

I'm glad the video saved you a few hundred dollars! Happy new year to you as well!

@christophermendez1607 3 года назад

@@chrisfix I couldn’t find the gloss clear so I got matte clear clear coat is that okay?

@susieballard4957 3 года назад

@@christophermendez1607 I don't think you want anything that causes a matte effect for the headlight, but I could be wrong. I'm commenting to you so that your comment will get recognition from chrisfix and you might get an answer. Keep thumbs upping people in this comment section and it will give Chris a notice that there is activity on this comment.

@christophermendez1607 3 года назад

@@susieballard4957 thanks I ended up doing it and it didn’t come out as clear as I wanted but it wasn’t yellow anymore.

@Ink_N_Sketch 3 года назад

@@christophermendez1607 well, atleast it isn't yellow. I would try to do it over when you find the gloss though. But that's just me 🙃

@promiscuousalgae 8 лет назад

"unfortunately for the PT cruiser" lol its unfortunate it's a PT cruiser in general

@Giggityguyify 8 лет назад

Glad I wasn't the only one thinking that...

@Ladosligese 8 лет назад

nothing wrong with a pt cruiser .. well perhaps a few issues , but if u want the style, you gotta pay :D no such thing as a flawless car

@AyoBaby 8 лет назад

lol

@alwayspink07 8 лет назад

+Ladosligese who would want the style though lol :D

@Ladosligese 8 лет назад

E. R. i would :D love the english cab / hurse look haha

@betterwithrum Год назад

saw this video 8yrs ago when you first uploaded it Chris, didn't need it then, but man is it coming in clutch today. Bought a truck (Dodge RAM) and the state safety inspection. Just got back from Home Depot and about to put this video to work. Thank you!

@AnHebrewChild 2 месяца назад

@betterwithrum - How did this turn out for you?

@betterwithrum 2 месяца назад

@@AnHebrewChild it helped but state inspectors still failed me. So I had to replace them. Honestly you can’t tell a difference. I think these guys just won’t let you pass unless you’ve spent money. They said I was missing a bracket for the suspension but when I went to the dodge dealer parts center they said that my year didn’t have that.

@ChiTownBossFJB 2 года назад

Just did this yesterday and I cannot believe how good my headlight looks! If you are having any doubts trust me, if you actually follow the steps you should be fine! Thanks ChrisFix!!!

@Cdenham2221 5 лет назад

I followed these instructions in the video, and the headlights on my 03 Highlander look new! Amazing, just amazing. Thanks Chris!

@dipped_apples_n_more847 5 лет назад

I did this and applied the clear coat and it hazed up so what do I do now

@Radditz68 3 года назад

Amazing video, I watched and did this 1 year ago and forgot to comment lol but: I was skeptical about using clear coat paint, folks said it's only a temporary fix and it will yellow again within 6 months. But, after a year the headlight is still looking great. No yellowing or chipping. Thanks a lot Chris!

@deftlefthand9964 25 дней назад

I'm actually psyched to do this project!! TY for providing such a detailed tutorial!!!

@chrisfix 24 дня назад

Awesome! Good luck and let me know how it goes. The best part is, if you mess up you can always sand them back down and start over.

@dukeofdaily2091 3 года назад

I finally decided to do this, and it worked awesome My truck's headlights were super cloudy, but now they look almost brand new! Definitely one of my favorite channels! Thanks man!

@crowneproductions9908 10 месяцев назад

I did this like 9 years ago when this video was new posted on my 2002 VW Jetta 1.8T and it worked like a goddamned charm. Here I am in 2023, 2 vehicles later (2014 Dodge Avenger, and now on my 2021 Chevy Colorado Z71) and I have a wife and kids and a home (I was like 22 when I did this with the Jetta) and my wife's 2016 Nissan Rogue headlamps are so foggy that it's literally dimming the lights at night when she drives. Was looking back trying to find this video because I remembered how great it worked on the Jetta almost a decade ago and boom baby! Found it. Thanks my friend. Headed to the hardware store tomorrow after work for supplies and will be working on my wife's Rogue this weekend.

@chrisfix 10 месяцев назад

I'm glad this worked well for your VW way back then and you're doing it again! Crazy how time flies!

@AkiFrictionz 5 лет назад

unclear instructions, my blinker fluid is leaking out of my headlights

@zlegend9628 5 лет назад

Too old joke to be funny

@famfactor3073 4 года назад

funny😂

@Jinukov 4 года назад

Booooo

@reggiebarboza6711 4 года назад

You sanded wayyy too much.

@chrisfix 4 года назад

Don't sand too hard!

@feliciaflanders5810 6 лет назад

I'm a middle school teacher and I just wanted to compliment you on the quality of this video as a teacher. You explain background concepts, the purpose of each tool and how you model how to do each step clearly and correctly, I loved it both as a teacher and someone who needs to prepare a car scratch.

@chrisfix 6 лет назад

Thanks!!!!

@adubx 5 месяцев назад

I just tried this on my 2014 Kia Soul this morning and it works! I was afraid to commit to the high gloss so I used wax like another video showed. But now that I see that I actually will work for me next time I will sand it down a little bit better and use the gloss. Thanks Chris! You are very trustworthy source for this near 60-year-old woman

@chrisfix 5 месяцев назад

Glad this worked well for you! Thanks!

@brocklewis6462 6 лет назад

I'm 15 and I'm getting my first used car soon! I get my license in a couple months and I can't wait. Your videos have been so helpful to me, thank you.

@chrisfix 6 лет назад

Awesome man!

@MV60 6 лет назад

Best thing is that yellowed lights make the car look lower value even if the rest of the car is perfect, so you can find a bargain that way, screw them down on the price and then you can fix the headlights yourself and win. :)

@SM-vq2vs 6 лет назад

Brock Lewis where did you live. in my country you can get car drivers licence when you are 18

@franciscorompana2985 6 лет назад

Sakari M - also in mine, but my brother got it with 16 in the navy what is away a magic fun.

@SM-vq2vs 6 лет назад

Francisco Rompana ok

@inayat4339 5 лет назад

I hope this glitch is not patched

@leonj1844 5 лет назад

Same. The gov better not vault this

@leonj1844 5 лет назад

Eddie M alright Eddie

@killercoyote3445 5 лет назад

Eddie M Go back to watching street fighter videos calling people virgins you’re the biggest one😂

@shadowblade2149 5 лет назад

The FBI probably already did that

@gingerhunny 6 лет назад

Ladies, sand thoroughly. Chris makes it look easy. My first headlight I had to resand and repaint because I didn't get down to the plastic. It crackled. Now that I have sanded properly the job is beautiful on my 2003 Avalon. Thanks Chris!!!

@eyeswideshut2800 6 лет назад

That's the biggest problem with them all, it's all about removing all the grime or streaks and texture..lol

@zachmiller9175 6 лет назад

I had that problem too but I think it was due to spraying the paint too heavily. It's important to use very light coats when spraying plastic

@georgelopez9517 3 года назад

I just did mine, and the clear coat looks like it’s cracked. I spent an hour sanding but I don’t know what to do. Once your headlights also looked cracked, how exactly did you sand it in what order? 600 the. 2,000 and then spray coat again?

@gingerhunny 3 года назад

@@georgelopez9517 I had to purchase new lights as the re-finish job only stayed nice for 6 months.

@driftyboizz 3 месяца назад

Thanks for teaching me more in 5 months about engine maintenance, care, parts repair and prevention on a lot of aspects from it, than my automotive career has done in 2.6 years, love your dedication!

@VayaconChupacabra 5 лет назад

I was like "how does this channel have 5.2* million subs?"......Then I watched a few of your vids and was like "Ohhhhhh, I see." You have some great content.

@tprimeau1 7 лет назад

Man you can sand fast!

@chrisfix 7 лет назад

Comes with years of experience :P

@vengefulvegan 7 лет назад

I followed your instructions and the headlights on the Mazda 3 came out perfect. Bit of an effort, but one hell of a money saver.

@chrisfix 7 лет назад

Awesome! Glad the video was helpful!

@AsianNIGMA 7 лет назад

vengefulvegan I just bought oems, $120 lasts five times longer

@colemanmerrill 7 лет назад

vengefulvegan I just did mine and I'm waiting to 24 hours for it to dry. It doesn't look super clear after I sprayed the clear coat on, do it dry clear after the 24 hour period?

@saberq1438 Год назад

THATS CHRIS I WILL BE DOING THIS TO BOTH OUR CARS. MY HUSBAND WILL NEVER DO IT. I'M NOT SCARED.

@_wouter52 3 года назад

Great video! I like how you show us why we don't need to worry when the headlights don't look shiny after the first coat of clear gloss. It really helps to not overthink the results :)

@DieseltheWhiteTailedBuck 2 года назад

Your pfp looks like a skin for Bdubs...

@JohnDoe-yl4ls 3 года назад

Chris I never seen a RU-vidr who responded to his old videos like you do. It might seem silly to hear this from a random guy on the internet but I'm proud of you my guy. Keep up the amazing work and never change!

@centurybug 6 лет назад

Just brought my dream car (2004 wrx) home this weekend, but the headlights are a little hazy so I'm gonna try this tomorrow. Thanks to you, I'm not afraid to work on my car myself!

@chrisfix 6 лет назад

That’s awesome!

@camochick4617 6 лет назад

you won't be disappointed ,i bought some crap from Pep Boys and it didn't work but what Chris showed us really works !

@evemito 2 года назад

I originally found a video years ago of someone doing this to their car. Having watched your other videos, I was glad to find your video. I didn't have the four or six hundred grit, just some of the fiber ones, but it came out wonderful. Thanks so much

@chrisfix 2 года назад

Awesome! Glad the video was helpful!

@jackiechan6460 3 года назад

Did this today and gawdam, the headlights on my civic are looking so good. I was actually shopping for new lights until i remembered this video. Thanks Chris. My bucket is looking more like a polished bucket now :)

@devinbalkaran7301 4 года назад

My dads Escalade headlights are 1200$ a piece, so I showed him this video and 5 hours later he buys 2 new headlights instead of doing this 🤦‍♂️

@chrisfix 4 года назад

Darn! In the future if they yellow, maybe you can convince him to do this!

@EpIc_NaChO 4 года назад

Clean up the olds ones and sell them on ebay 👍

@povracing925 4 года назад

that would be a negative. they are not 1200 dollars a piece lol

@barkbark5645 4 года назад

Hah, guess his time is worth more. I'd ask if you can have his old headlights, clean them up, then sell them on ebay.

@bettycooper369 4 года назад

Shoulda told him you'd buy new headlights for him for half price, then do this and pocket the cash. Everyone wins.

@halleurig3053 9 лет назад

Really enjoyed this video. The narrator was very informative and easy to understand and follow which is crucial in a how-to video.

@thaik56 8 лет назад

+Hal Leurig Chris is the man for fixing cars!

@andsto 8 месяцев назад

finally did this on my 2009 Toyota Rav4 - I was nervous....it didn't look that much better after all the sanding... UNTIL i sprayed that clear coat. Amazingly clear results!! Thanks ChrisFix

@thecosmicsnail 8 лет назад

I did this to my teeth. Now I have a beautiful smile.

@thecosmicsnail 8 лет назад

P.S. cut nostril holes in the plastic. I found out the hard way.

@El_TerribleVP 7 лет назад

Funniest comment I've ever read! LOL

@StitchetyDoodah 7 лет назад

thecosmicsnail lol

@glinnz05 6 лет назад

you might be low on blinker fluid ....

@BelieveNoGod 6 лет назад

What did the clear coat taste like ?

@JB-fn7ky 3 года назад

Just did ‘06 Pilot, After watching every video I possibly could, Chris’s made the most sense. The only deviation I made was using Maguires headlight coating vs. clearcoat. Couldn’t be more pleased with the results, thanks Chris!

@MeatVision 8 лет назад

it worked great on my horse

@nambinhvu 8 лет назад

my horse doesn't have headlights

@alexanderbondestam 8 лет назад

+nambinhvu youre missing out

@nambinhvu 8 лет назад

+Alexander Bondestam I know :/ I always wanted to take her out for a ride at night lol

@Waltur656 8 лет назад

it was a mustang right

@Waltur656 8 лет назад

Your Ford Mustang looked good after.

@Meatlove Год назад

I followed these steps with my totally yellowed headlights on my 21 y.o. Opel Corsa. I had no finer sandpaper than 600 grit. I gave it a try and it worked wonders. Done sanding within the hour. Sprayed them in 4 layers. The result the next day was kind of dull. (Orange peel) Since I didn't have any sandpaper to buff it up, I used Commandant M5 polish with a polishing pad on my cordless drill. The end result really is amazing! And I still think the paint cures a bit more to full clarity. This video saved me from buying new headlights, so thanks man! Total costs under $10,-

@violeman 2 года назад

This is the way Dad and I fixed ours also!! Such an amazing technique that he would do it to customers headlight covers as well!! Thank you for sharing because the word needs to get out on how things like this can, help people save loads of money in this crazy expensive World we live in.

@Robert08010 8 лет назад

It's been about 2 years since this was posted. I'd be very interested to hear just how "permanent" of a results you had. Do they still look good after 2 years?

@Yogangster1995 7 лет назад

I would also like to see!

@ctvilla08 7 лет назад

You can find a links in the video description. It shows what they look like now. Method works.

@Tatusiek_1 7 лет назад

Rob Fowler it is not actually permanent it wears off after a couple of years

@Robert08010 7 лет назад

I'm sorry to hear that, but at least if I know it lasts 2 years, maybe its still worth it.

@michaelvarley2326 7 лет назад

@smokestack3327 4 года назад

I like to think Chris goes around taking people’s cars at random fixing them and then returning the vehicles after making the video on their issue.

@chrisfix 4 года назад

I would never steal a car haha, I always work on my own cars or friends cars!

@istachi 3 года назад

@@chrisfix I would be a happy man if you stole my car, all the issues would disappear.

@reecewouters1445 Год назад

I tried this technique on my headlights and it worked well for the most part, i did have an issue with orange peel afterwards, here's how i fixed that. After the clear had dried completely i wet sanded with 2000-->3000-->5000 grit, i then followed up with compound and polish from meguiars then wax. I did this by hand mind you but you could do it by machine. I must also mention that i used 2k professional grade clearcoat, the cartridge type. Hope this is helpful to anyone who faces the same issue.

@scottytownsend638 2 года назад

Wow thanks so much Chris! Just did this on my mk1 Audi TT and the results are totally astonishing. I tried several methods over a few weeks and this was hands down the best. Nothing else comes close. Personally I removed headlights and made a little spray booth :)

@gravemind6536 9 месяцев назад

Did this on my mums MK5 Golf during 2020 lockdown she was impressed and the restoration is holding up well over 3 years later.

@tasiasuega9964 6 лет назад

Idk why im watching this i dont even have a car lmao

@tinaat1013 6 лет назад

Hahahahaha! Too frikkin' funny! Best comment ever.

@chadchaddock5778 6 лет назад

Same lol

@zyptoskid 6 лет назад

Tasi Asuega fucking same

@grimblesqueem2291 6 лет назад

Tasi Asuega... Car repair porn. It's an addiction. Don't get me started on the slow-motion woodworking videos with jazzy background music.

@sinlea1489 6 лет назад

Tasi Asuega Hahahah

@kennethfarringtonjr6887 4 года назад

You've definitely gotten more energetic in you're voice in recent years!!!💪🏽

@thevoyager87 Год назад

Hey Chris, been watching your videos for a while now and cant help but thank you for how helpful these videos have been! I just got my first car a couple days ago and I'm so excited to start working on it, starting with the headlights!! Keep up the awesome work my man!! ❤🚘

@morbidbeauty_ 3 года назад

As someone that loves to do their own upkeep on everything they own, keeping it as pristine as possible-- I'm so incredibly grateful for this video! Thank you so much! You definitely just saved me hundreds of dollars, my girl is getting up there in age!

@Cypherdiaz951 8 лет назад

I used your technique and my headlamps look brand new! Thank man!

@chrisfix 8 лет назад

+Ceddy Ced AWESOME! That is what I like to hear!

@MrOldeastdallas 8 лет назад

I'm planning to clean mine one of these weekends and hopefully they come out looking like new.

@endlesspossibilityes 4 года назад

You’re the best dude. I’m learning so much from you. Thank you for the high quality, in depth, step by step videos. And you have a great attitude as well. That makes a big difference. Gratitude, from Nashville, TN