No video :(

How to Restore the Pioneer Reel/Reel Deck RT-909

Подписаться 247

Просмотров 76 тыс.

50% 1

This rendition is a highly shortened version of the 4.5 hours set of DVDs, depicting on how a RT-909 should be Restored. An over the shoulder look so to speak. (5 DVDs) and is only meant to give you a taste of the full version.
The entire set can be purchased on Ebay, just click on the link:
cgi.ebay.com/Re...
If you have any questions or comments, feel free to contact me at:
801-824--5811
or at:
possche@comcast.net

Опубликовано:

13 окт 2010

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@billhennigan3773 11 месяцев назад

REST in peace..Thomas..You were great in repairs..

@euromastertech 12 лет назад

Hello, The multimeter was used to make sure that the micro switches went to near zero ohms, but is not necessary. The oscilloscope was used for azimuth alignment. If you want to be very precise like I am than you need one but you also need laboratory alignment tapes and a torque meter. As a rule I do not replace any capacitors. Pioneer uses High Quality condensers with very high dielectric strength, low leakage and working voltages far above for the circuit parameters. Cheers, Tom Possche

@joemonroe8896 8 лет назад

two tips for you... 1) oil your magnifier lamp hinges. 2) the rt909 has. an in/out reel adjustment slot on the fwd end of each reel shaft (facing the user) a simple flat head screwdriver will enable you to avoid all the tape scrape i could hear during the segments when the 7 inch reels were spinning.

@fadetoblack.- 11 месяцев назад

you still repair for customer?

@TCDF22 13 лет назад

Just terrific, granted it's not the whole grueling process, but it is a labor of love and this kind of attention to detail must be a fascinating watch. Love the test music at the end. If I still had my 909, I would let this man work on it, better yet i would love to sit and watch him do it live! My god, can you imagine?.... makes me sad I don't have my baby anymore. Great video even if it is an advertisement, but wow, what an advertisement!

@gosoniccgo6324 Год назад

Hello friend, I have a question. How do I repair the screen of my reel to reel pioneer? Everything works and sounds great, but the panel went off. Can you give me some advice?

@thesedoy7 9 лет назад

you got golden hands Great job

@rustynail246 2 года назад

I would never file the contact considering these parts are impossible to find, once you file it, you lost some metal on that contact and it won't last as long. Just clean the carbon off is good enough.

@arturoyluzstellahurtadogon7864 Год назад

Cordial saludo. Que delicia ver trabajar un maestro con ese conocimiento y dedicación. Excelente vídeo. Tengo dos 909 una de ellas empezó a dar problemas, el motor izquierdo se quedó muerto, no daba play a ese lado ni menos rebobinaba...solo a la derecha.... ahora no responde a ningún mando...y me he dado cuenta que con tan solo encender la máquina, inmediatamente empieza el motor izquierdo a girar como loco. Alguna orientación o consejo..lo agradecería inmensamente. Arturo Colombia.

@kdegru 13 лет назад

It is a pleasure to see a fine technician at work doing things the right way and not skipping on the very important details that will provide long reliable life.

@euromastertech 11 лет назад

Some units were meant for the US 110V and some for export with 110V/220V Yours could be a later or an earlier model. The unit I worked on was from one of my customers, who required a Restoration. Cheers, Tom

@urbannpa 9 лет назад

I didn"t go that far on the tear down. The one I got had some of the rubber parts turn to tar, pinch rollers and belt. My question is,I want to align the heads,is the cost of the test tape over $200.00 or am I looking in the wrong places?.

@JimmerSD 10 лет назад

What is cool about this video is for someone who knows what is going on it is a great step by step on what to repair. Everyone one else? Eh???

@penta15786 12 лет назад

sopmot - You are the kind of person that I would like to get some ideas of how to repair my Pioneer CT-F850.

@cliffperkins2339 5 лет назад

I am about to change the belt and pinch rollers on mine. Hope that is all she needs.

@dannywu648 4 года назад

I do have a rt-909. Everything working but the reverse play. Any idea? Thanks

@candymintz 11 лет назад

thanks for the info, mine is 110v / 220v....

@rickybeann 11 лет назад

that´s olders "home recording reel to reel tape tubes like gruding TK-47 and others like that" will work well for recording voice (singing), old style (elvis styles) with all the saturation of the tube time? all warm weight and harmonics that recordings used to had? to play,

@mjshuja1948 2 года назад

My pioneer Rt909 was working till I clean inside with Crc Electronics Cleaner,it does want to run,still has power,can any body help me Please 👍👍👍✌️✌️✌️👊👊👊😧😧😥😢😪

@jesszal 13 лет назад

I have this Reel to Reel I wish I could use it still and it was looking as good as this one on the inside :( Great work, if your ever in the UK please let me know hard to find anyone to fix mine :) Nice Vid. All the best

@mjshuja1948 2 года назад

I had a HELL TO DISASSEMBLE THE MOTER,I WORKED ON GERMAN CAR,I HAVE BEEN DOING THIS SINCE I WAS 4 YEARS OLD😱😱😱👍👍👍✌️✌️✌️👊👊👊

@thesedoy7 8 лет назад

Hello would you tell me please what kind (lubricate greasy) Best do used thank you so much

@danielbastos1117 10 лет назад

if you turn on the numeric panel meter, but not the vumeters

@Pj_Jotaquest 13 лет назад

Hello ! I have a almost mint cosmetic condition 909 and it playbacks 100% . The problem is when a record and erase a tape : 1) When I try to erase a song, it doesn't erase it 100% ! The left side still plays the song in a very low volume ! 2) When I try to record over a pre recorded tune and playback this new recording, I can hear the old tune in a very low volume ! Do you know why ? PS : The heads were cleaned e they look very mint pieces !

@rustynail246 2 года назад

So why didn't you show us what did you adjust to get the max amplitude and in phase signals? I thought that's the whole purpose of this video, to show us how, not just to show us what.

@VintageTechnik 10 лет назад

I'm glad I have not had to repair my pioneer RT , only a control-light no longer works , only which is defective for the directional....

@TheRootMaster 3 года назад

Молодец мужик, сейчас таких уже не делают, ни людей, ни магнитофонов ...

@Oerg866 12 лет назад

Was wobbling around because of the music at the end :) Great stuff! I want one of those now.

@candymintz 11 лет назад

Greetings, On your RT-909 you have a set of fuses, on mine there are no fuses, is yours dual voltage? do I have a later model? any info appreciated....

@thesedoy7 8 лет назад

Great job very professional how much that will be to do the same thing's with my Pioneer 909 thank you

@thesedoy7 8 лет назад

Hello I got a question when I record on my pioneer 909 VU meter , and from source shows me very nice level recording ,soon as I record something and put the same tape whatever I record to the different reel to reel recorders then I see low level, And again the same tape on the completely different reel to reel Machine maybe I'm doing something wrong? thank you

@jenniferlogan-manzer1112 8 лет назад

+thesedoy7 - this is my dad - he passed away in 2012 RIP

@scottonnob 7 лет назад

Jennifer - I've tried, for some time, to secure your father's DVDs. Unfortunately, none of my efforts have produced positive results. Is it still possible to purchase the set? If so, I'm definitely interested.

@jenniferlogan-manzer1112 7 лет назад

Hi Scott - I don't know if they exist anymore, all his files have been transferred to U-Tube.. feel free to view his history and thank you

@scottonnob 7 лет назад

Jennifer - Yeah, I've scoured You Tube, but there is only one clip from the DVDs. Ironically, about a year ago, there was a full set on Ebay, but somebody outbid me with .003 seconds left, or I would have raised my offer. I even contacted him and said I'd pay him whatever he wanted for copies. He declined my offer, saying that he felt that would be unethical. I told him your father had passed away, but it was no dice. So thanks anyway. And if you ever find the files, let me know. I'd love to purchase a set. Thanks, Scott

@michaeltate227 5 лет назад

Can you tell me how hard it is to replace the capstan drive belt? Where it is located and how does it go on?

@mjshuja1948 2 года назад

It is simple it against the wall between two aluminum round wheel

@danielbastos1117 10 лет назад

Hey master, if I can help I thank you, I have a pioneer rt 909 that will not start the vumeters panel, check the connectors but nothing, I guess enough energy does not reach you, you can help me with that? Thank you. I am using a translator online.

@mariaadelabonavitaleites9644 10 лет назад

Hmmmmmm

@danielbastos1117 10 лет назад

Hmmmmmm que?... esta comiendo helado o algo asi? o es tecnica electronica

@mariaadelabonavitaleites9644 10 лет назад

Jajaja Just reading your comment!! Take care! Kiss

@bwrnjr826 3 года назад

Do U have a Pioneer RT 909 for sale?

@leifwalker4845 8 лет назад

Looking for someone to restore my RT 909. Are you doing it now? Consider doing mine? Prince range if willing?

@JamesT65 7 лет назад

look up J-Corder he will take it to a whole new level..

@nagoya6toto 11 лет назад

GOOD JOB

@user-qc9ni5yq3k 6 лет назад

Спасибо! Очень интересный аппарат!

@rsanchez7111 10 лет назад

Thanks for sharing. You sure know what you are doing. In what part of the world are you? Thx

@MrHandfromEbay 9 лет назад

The tension wheel business looks scary.

@BADBIKERBENNY 12 лет назад

Ironicly, I just bought this exact same reel to reel. The only thing it needs is two new pinch wheels.

@user-ci7sf2uq1k Год назад

Как всегда класс!!! Молодец!

@MediaScheme 11 лет назад

i need mine repaired. are you still doing repairs?

@paultweten1472 4 года назад

Do you work on machines for money? I would love it if you would refurbish mine. Let me know. Thank you!

@euromastertech 11 лет назад

Hello pobe rokit, Go to ebay and put RT-909 in the search engine and look for "Restoration Service" Cheers, Tom Possche

@mirakel64 10 лет назад

dutch??

@jenniferlogan-manzer1112 8 лет назад

+Mart Dekkers yes - this is my Dad - and he is Dutch, passed away in 2012

@mirakel64 8 лет назад

Sorry om te horen dacht aan het accent te horen dat het een nederlander was. Veel sterkte. gr. Mart

@davidhaney1394 5 лет назад

how to restore a rt909......its a secret , but he`ll give you an 8 min hint.

@davidwall8988 8 лет назад

This preview isn't worth a plug nickel. You can't understand what he says and he doesn't follow through on any one aspect of what he is doing. Very POORLY DONE, even if just meant for a "taste" = tastes awlful !!