HOW TO RETRACT AN ELECTRONIC PARKING BRAKE WITHOUT SCAN TOOL 2021 Kia Telluride Rear Brake Pads DIY

Подписаться 40 тыс.

Просмотров 39 тыс.

50% 1

amzn.to/3Q9tTNh - Power Stop Z23-2199 Rear Z23 Evolution Sport Carbon Fiber Infused Ceramic Brake Pads with Hardware
amzn.to/40bp9LN - Power Stop CRK8310 Z17 Rear Coated Rotor Kit-Coated Brake Rotors, Ceramic Brake Pads
amzn.to/406CUv9 - BIG RED T43202 Torin Heavy Duty Steel Jack Stands: 3 Ton
amzn.to/3FoBym2 - MILWAUKEE'S Mid-Torque Impact Wrench,3/8",Cordless
amzn.to/4749Kzj - Milwaukee 2560-20 M12 FUEL 3/8" Extended Ratchet (Bare Tool)
amzn.to/4954WeA - Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
amzn.to/3S7UAEM - GEARWRENCH 3 Pc. 1/2" Drive High-Strength Wheel Protector Impact Socket Set, Metric - 84946
amzn.to/3KrWMmH - Versachem 26080 Synthetic Caliper Grease
amzn.to/46TaVlz - Permatex 80653 Silicone Extreme Brake Parts Lubricant, 8 fl. oz.
amzn.to/2VQD4qA - GearWrench 3/8" drive torque wrench 10-100 ft. lbs 85062
amzn.to/2R7rdUb Brake Caliper Compression Tool
This tool is sometimes helpful if the screwdriver or pry bar trick doesn't push the caliper all the way in.
amzn.to/3Lg5Xqg - Brass Wire Wheel Brush Kit for Drill
Just a quick video showing how I manually retracted the Electronic Parking Brake in order to replace the Rear Brake Pads on a 2021 KIA Telluride. This would be the same for the Hyundai Palisade.
The Torque Specs I found online:
27 - 30 ft. lbs. for the Caliper Slide Pin Bolts.
Thanks for Watching!
Please Subscribe!
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
'Forever Young' by Otis McDonald
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases.

Авто/Мото

Опубликовано:

21 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@tommcdonagh2975 21 день назад

Thanks for the info! Worked great on a 2019 Santa Fe, no scan tool needed! One thing I noticed is that the gasket between the EPB motor and the caliper is an o-ring. I found it easier to reattach the motor by seating the o-ring into the caliper groove first. 👍

@DantheFixitMan 21 день назад

Glad to hear it worked, and thx for the tip! Take care, -Dan

@richardmann2960 4 месяца назад

Great video! I confirm this works on 2020 Hyundai Tucson. Thanks for the information!

@michaelcooke7772 21 день назад

THANK YOU SO MUCH DAN! I'm "old school" and have done all of my own work on all of my vehicles. I bought my first new car in 2021 and it has an electric parking brake. I went all electric. I bought a 2021 Hyundai KONA EV. I need to replace my rear pads and rotors. This is an awesome explanation/insrtuction video.

@BBBILLY86 2 месяца назад

Going to do this to a 2020 Pallisaide with 37,000 miles. Thank you for the E-E-brake demo.

@basilbcf День назад

Just did this job today (including changing one of the rotors). Only difference is I used the Caliper compression tool.

@rsxboss302 3 месяца назад

Just did the same thing on a 2020 Tucson . Thanks man

@waynebechard6964 6 месяцев назад

Great. Thanks for the info. Will check it out the next time I have the wheels off.

@terrell07981 20 дней назад

Thank you so much for the video. You saved my butt with this video.

@ianf2985 Месяц назад

Great video! Thank you!

@SergioERestrepo 2 месяца назад

Thank you!!

@erikbardelas 3 месяца назад

Thank you for this! I just did 3/4 brakes on mine the last (passenger side rear) spins endlessly so I can’t get it to retract. Had to go to work I’ll finish up later, have any ideas why it wouldn’t retract so I can push in the piston? The driver side rear was smooth it’s just rear passenger.

@ianf2985 Месяц назад

I’ll be working on a 2020 Sportage but assume it will be basically the same as I don’t have the software so will need to do manually.

@derrickgordon1164 2 месяца назад

Thank you sir !!!!! I confirm this it works on a 2019 Hyundai Sante Fe.!!!

@chadlucero808 27 дней назад

I concur

@kwonn2x464 6 дней назад

Nice vid ! After unscrewing both bolts , my calipers still won’t come off ? Any reasons why ? I did hear you mention something about making sure the parking brake is off but i’m not sure what you mean by that . I have to park the car in order to work on it .

@legion4747 2 месяца назад

Why did you apply the silicone grease under the clip on the carrier? You need to put it on the clip where the pads slide.

@alexnucette3607 29 дней назад

Do you need to take off the motor for sure to push the caliper back?

@mistermedina01 3 месяца назад

Does that work for 2020 Nissan Rogue

@memedaddyz 4 месяца назад

will this work for VW CC?

@travisgilcrease5256 3 месяца назад

Yo, your a gentleman and a scholar. Thank you for sharing this. Dealership wants to try and charge $980 for this because they claim to be the only ones have the "specialized tool" to release the caliper. (Question is this somewhat universal for all make and model?)

@DantheFixitMan 3 месяца назад

No worries, it is the same or very similar with many makes and models. Thx for watching! Take care, -Dan

@hightide-mcknotts 8 месяцев назад

Great Video Thanks!

@michaelbee2767 18 дней назад

Does this work on a 21’ Kia K5?

@waynebechard6964 6 месяцев назад

Any idea if this would be the same for the 2021 Santa Fe?

@DantheFixitMan 6 месяцев назад

I am not sure about the sizes of the fastener or the mechanism, but if it has an electronic parking brake, it should be the same process.

@derrickgordon1164 2 месяца назад

It worked on my 2019 Hyundai Sante Fe !!!!

@derrickgordon1164 2 месяца назад

It took a 5mm. allen wrench to remove the cover and to turn the screw clockwise inside the mechanism!!!

@waynebechard6964 2 месяца назад

@@derrickgordon1164 thanks very much for the info!!

@TheMirsad91 29 дней назад

When you start doing brake job, does it your EPB button has been applied? Or you reales EPB and put on P and start job?

@DantheFixitMan 29 дней назад

The parking brake should be off. Thx! -Dan

@TheMirsad91 21 день назад

Thank you, i try on kia Sportage 2020 and its working 👌👏👏👍@@DantheFixitMan

@corycarlson950 Месяц назад

The EPB piston has indentations on each side suggesting that it should be wound, not just pushed straight back. Can you comment on this? From the video I get the impression that if could can physically just push it straight back, that means it doesn't need to be wound. Is that the only way to tell?

@DantheFixitMan Месяц назад

That's a great question. I have done quite a few that have the indentations, but they still push straight back once you have retracted the mechanism all the way first. I think the indentations are intended to line up with a small part that sticks out on the back of the brake pad to prevent the mechanism from spinning freely against the back of the brake pad when it is applied. Hope that helps. Best of luck to you. -Dan

@corycarlson950 29 дней назад

@@DantheFixitMan After watching another youtube video I think I know the answer. When you use a rewinding tool you are retracting both the piston and the motor at the same time. This eliminates the need to do the battery method or dismantle the motor to retract it. If you use the battery or dismantle method, all you are retracting is the motor. Same with service mode. You still need to push the piston back in, which you can push straight back since the motor is already rewound. This video explains it all. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ocLzmxy2RyM.html

@josemariatorres-db1hk 6 месяцев назад

EPB light also the auto hold light stays on. Just replaced brake pads rear How to clear those lights from dash???

@DFWAuto_Hack 4 месяца назад

Did you figure it out

@josemariatorres-db1hk 4 месяца назад

Epb was not connected just needed a scanner to reset light

@DFWAuto_Hack 4 месяца назад

@@josemariatorres-db1hk thank you. Im about to do this. Did you do the manual procedure by screwing with T5 clockwise? If so, when done did you press brakes and good to go?

@josemariatorres-db1hk 4 месяца назад

@DFWAuto_Hack I removed epb motor and pressed piston normally with screwdriver . When installing epb just make sure to turn motor gears ⚙️ use 12v power to make it turn or pliers you can damage gear ⚙️ if using pliers good luck use what ever easiest for you

@DFWAuto_Hack 4 месяца назад

@@josemariatorres-db1hk thanks. I ended up doing it with my scanner. I made a video of the procedure i will upload tonight to help others