How to retrofit Wireless Charger in BMW F30/F32 LCI | Installation tutorial

Подписаться 70 тыс.

Просмотров 85 тыс.

50% 1

"Want to keep your phone's battery topped up while driving? This Wireless Charger for BMW 3 and 4 Series LCI (F30/F31/F32/F33/F34/F36/F8x) will fit perfect into your car’s center console trim: www.bimmer-tech.net/products-...
The pad features a non-slip silicone surface to keep your device from sliding around and matches both wireless Apple CarPlay and Android Auto. Pair your phone, place it on the wireless charging pad and use your favorite apps, without a cable in sight!
Installing BimmerTech's wireless charging station for BMW F30 and related models is simple. Follow along as Chaz takes you through the process, step-by-step.
(If you have a pre-LCI vehicle with permanently accessible cupholders and an ashtray, it's still possible to retrofit this charger after replacing the center console trim piece. You will need to order a BMW original trim piece independently, which may be available second hand. The replacement piece required has part number: 51169323675. The vehicle in this video is a pre-LCI F30 that we retrofit with a new trim piece before installing the wireless charger. Please note that in some pre-LCI vehicles you may also be required to trim the inside of the center console trim with a dremel to accommodate the replacement cupholders. These cuts will not be visible after reassembling your interior.)
Subscribe to our channel and stay updated with the newest BMW upgrades and installation tutorials: ru-vid.com...
--------------------------------------------------------
MORE INFORMATION:
Website: www.bimmer-tech.net/?...
Email: info@bimmer-tech.net
Newsletter:www.bimmer-tech.net/newslette...
Office & Showroom: 6925 Lake Ellenor Dr, Suite 501A, Orlando, FL 32809
Facebook: / bimmertechllp
Twitter: / bimmertechll
Instagram: / bimmer.tech "

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 166

@trilobite99 4 года назад

Will the LCI trim work in a 2013 F30 328i?

@bimmer-tech 4 года назад

We believe it should. The 2014 pre LCI F30 shown in the video likely has the same console trim as a 2013 (there were only two available in pre LCI, both very similar: www.realoem.com/bmw/enUS/showparts?id=3C13-USA-05-2013-F30-BMW-328i&diagId=51_8534) and we didn't need to modify anything at all to replace it. If anything it would probably require very minimal effort to make it fit. BMW's are like legos for the most part.

@PriyankuBaruah 4 года назад

I recently fitted my 2015 pre-LCI F30 with the LCI F30 cupholder. It required some cutting as illustrated here - f30.bimmerpost.com/forums/showpost.php?p=19034522&postcount=128 I then fitted it with a similar wireless charger. I have a Pixel 4 and I do not use a case in my phones. The phone slips out of the charger within few seconds of driving! May be it would have worked if I had a heavier phone with a non slippery back - I cannot think of any such phone! Ideally, this would have been the best solution because I have wireless Android Auto. Though the wireless charger was of no use, at least I like the aesthetics of the LCI cupholder so it was not a failure in it's entirety!

@raphaelseiler9497 4 года назад

BimmerTech I also recently wanted to fitt it in a 2015 bmw f31 and it didnt fit. I am very disappointed in this product and video.

@Dobbybobby- 3 года назад

@@bimmer-tech i bought one or eBay and it didn't fit my 2014 320ix top left corner doesn't go in and trim locks won't align properly, any suggestion how it would fit ? On part I bought i think its from 2018 3 series

@bimmer-tech 3 года назад

@@Dobbybobby- Unfortunately, we can't help with products bought on eBay.

@lb57508 Год назад

Just installed it on my 320d touring, and it works like a charm, looks amazing, great tutorial. Thanks very much. A word of advice for others - if you have the brushed metal trim on your iDrive section, don't try and pry it out with your fingers when it's tightly held on still - the brushed metal is extremely sharp...

@rekap69 4 года назад

Great video, very well explained. Keep up the good work. Very helpful, thanks

@kerbi0207 4 года назад

Thanks a lot for the detailed explanation!

@MattOckendon 2 года назад

Really helpful guide to centre trim removal - thank you!

@bimmer-tech 2 года назад

Very welcome!

@irwanabdullah2481 2 года назад

Your video n tutorial is excellent... Easy to understand.. Great work

@bimmer-tech 2 года назад

Glad to hear that! Thank you

@J666HN_does_nothin 4 года назад

When will these be made for a bmw f20?

@christofm.7160 7 месяцев назад

Thanks for great tutorial! One additional remark which would have helped me. That little black 2 pin connector is locked at the backside. If I used a small screwdriver between connector and socket at the backside to loosen it, it doesn’t break when you pull it.

@bimmer-tech 7 месяцев назад

Thanks for that comment! That would definitely help others if they meet the same issue while installing :)

@matgrun2649 2 года назад

I think it should be mentioned that the LCI panels (especially new ones) sometimes are sold without the key fob antenna so it'll be important to switch that over from the old one. Saves the trouble finding out why there's a connector that does not plug anywhere 😄

@bimmer-tech 2 года назад

thanks for that!

@Arnamoo 4 года назад

too bad the center console piece from the lci cost abou 200 bucks in europe -.-

@lostcomuk 16 дней назад

is it normal it stays on after car has been switched off ?

@jonbarrow6257 4 года назад

AWESOME!!!!!! Any advice for someone with an F10-F11 2013 535i??

@bimmer-tech 4 года назад

Nothing we can do for you yet, unfortunately :(

@angelsweetpal 3 года назад

Excellent job, I followed your instructions and it was a breeze to install, 15 min. Star to finish thanks for this tutorial. Now, can you ease explain me what exactly does the "little connector " you put back @ 10:30 does??. I'm needing a power source for my lci radio trim and I'm wondering if that connector would help.

@angelsweetpal 3 года назад

I meant @ 10: 13

@bimmer-tech 3 года назад

@@angelsweetpal This is an internal antenna for the remote key fob. We advise against using this for any other purposes than intended by BMW

@abdulmalikmohammed900 4 года назад

Can you please upload a video to install the car charging tray on a 2020 330i, if this fits on it ?

@bimmer-tech 4 года назад

This is only for previous generation (F3x) LCI vehicles. It won't fit the current G20, sorry

@juliusashade6520 4 года назад

Would this fit in a 2016 x5 (F15)? If yes, do you have a video of how to install that can be shared?

@bimmer-tech 4 года назад

Unfortunately, it's not compatible with your car. Please subscribe to our newsletter in the link below for any news: www.bimmer-tech.net/newsletter/Signup/

@jon-lm2oy 2 года назад

Hey, I've just picked up a 21 plate 2 series gran coupe. But it has the phone holder and no wireless charging, just wondered if you did a kit for that one yet?

@bimmer-tech 2 года назад

Hey, not yet for this one, no.

@Dobbybobby- 3 года назад

By mistake I ordered one from 2018 series 3 for my 2014 320i xdrive and top left end doesn't fit in properly, do I need to do some modification or I need to order part# showed in the video? Thanks

@bimmer-tech 3 года назад

Hi, please contact our sales team with the last 7 digits of your VIN: www.bimmer-tech.net/page-contact. They'll check if you have to buy another one or yours is fine.

@thecar_surgeon Год назад

Hi, Thanks for the video. Can I ask what is the function of the rubber band behind the cup holder? I thought it is weird and removed it before noticing it in the video 😢

@bimmer-tech Год назад

Hey! The silicon mat grips your phone to prevent it from sliding out while driving, plus it is very convenient to keep the charger clean in case you spill any liquid since it is just behind the cupholders ;)

@rapidzz1155 Год назад

Will this fit a 2018 F22 2 Series? It also has the sliding cup holders

@bimmer-tech Год назад

Hi! Have you checked the compatibility on our page? If not, give us a go - send us the VIN and we will check it for you :)

@Ashhong1 3 года назад

Hi would this charger fit and work in the pre-LCI F30? I realize it won’t look as OEM, but will it at least fit on top of the ashtray/door in my car?

@bimmer-tech 3 года назад

There's a chance it could. Please give us the last 7 digits of your VIN and we'll check.

@martinleriche1634 2 года назад

I need help, I can obtain the same trim for my bmw 2014 f30 but the part number ends in a 6 and not a 5. Near identical but 1 wrong digit. Will this work before buying?? Thanks

@bimmer-tech 2 года назад

We recommend getting the trim piece with the exact same part number as written on the product site just to ensure that everything fits properly.

@michalwlosik3544 3 года назад

Against your recommendation I did not disconnect the battery to do the retrofit. I almost killed my battery (saw the "recharge battery" message after the installation. I finally got it to start but my key fob is now not recognized - I have to hold it next to the steering column to start the car. Other than that it opens and closes the doors remotely no problem. Blown fuse or is it just connected with low battery?

@bimmer-tech 3 года назад

Please try programming your keys to your car by following this tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zFrZecJFksU.html

@danielosdinia4258 3 года назад

The width of the charging pad is too small for the new mobile phones like iphone12 pro max and Samsung S21 ultra. Will they still be charged on this pad?

@bimmer-tech 3 года назад

Yes, they will :)

@I_Am_EnaPh 3 года назад

I’m having a slight issue. My cigarette lighter connector is different from the one on the wireless charging pad. Is there a solve or work around?

@bimmer-tech 2 года назад

We'd have to know your VIN to help you with that. Please contact our support team at support@bimmer-tech.net.

@ILLAILLS 3 года назад

Need this for a 2013 5 series

@bimmer-tech 3 года назад

For now we don't have wireless chargers for 5 Series vehicles.

@bob15780 Год назад

Hi hope you can help, I've bought the same part from bmw yet I find that the clips don't line up with the original holes, any help please

@bimmer-tech Год назад

Hi Robert! We suppose it would be best for you contact BMW support and tell them the product does not fit to your car :)

@Feared6b6y6many 3 года назад

Seems like I gotta cut the back of the center console in order for it to fit my car. I have a 2015 435i.

@bimmer-tech 3 года назад

Some of the Pre-LCI models require trim cuts to the center console, which are invisible after installing the LCI cup holder.

@alejandrojaimes3648 3 года назад

I have just installed this product I purchased with you guys. But, my question is that she car is turned off the blue led stills turn on right? Why it doesn’t turn off?

@bimmer-tech 3 года назад

Your car powers down most of the devices after around 10-15 minutes with the key taken at least 50 feet away. Until then the car will be in a stand by mode.

@TheTardis76 Год назад

I have a 2"x1.5" metal plate on the back of my phone to use with magnetic mounts, will that interfere with the charging ability?

@bimmer-tech Год назад

Hi! It's possible that the metal plate on the back of your phone could interfere with wireless charging. Wireless charging uses electromagnetic fields to transfer energy from the charger to your device, and a metal plate can disrupt those fields.

@v15h44l 4 года назад

Will the fittings and connections be the same for a manual transmission?

@bimmer-tech 4 года назад

Yes, this trim piece is the same in manual and automatic vehicles.

@EARise 2 года назад

Where can I get both the newer console trim and the charger for a 2015 428i grand coupe ?

@bimmer-tech 2 года назад

You can check the charger here: www.bimmer-tech.net/products-wireless-charger-for-bmw and the trim at your dealer.

@nickbrownfield3694 2 года назад

Just installed this today. Noticed the blue LED indicator light stays on constantly. Will this potentially drain my battery with the car parked and turned off?

@bimmer-tech 2 года назад

If you’re experiencing issues with your wireless charger, please contact our support at support@bimmer-tech.net with your order number/VIN and the team will help you as best as they can.

@4FunBeek 2 месяца назад

Hi , I’ve installed the charger it works great. Does the blue led staying on? Ever after switching off en closing your car ?

@bimmer-tech 2 месяца назад

If you close your car, it switches off :)

@4FunBeek 2 месяца назад

@@bimmer-tech Okay maybe the led is still lightning up then. Thanks for your response 👍

@fthirty3 2 года назад

Would be awesome if there was a magnetized version of this wireless charger so that iPhones w/ magsafe and android with magsafe cases could be held in place securely. :)

@bimmer-tech 2 года назад

Our team is always working on new and improved versions of our products, so watch this space ;)

@karanparekh8530 2 года назад

Hi - would this work on a 2020 430i Xdrive? I think my vehicle is F32 but unsure.

@bimmer-tech 2 года назад

When you enter your VIN on this website: www.bimmer-tech.net/products-wireless-charger-for-bmw you'll see whether you're compatible.

@vettori8185 4 года назад

Is this modification suitable for RHD vehicles too?

@bimmer-tech 4 года назад

Sure, it's good for LHD and RHD vehicles

@lewsmz3238 2 года назад

Hey, I'm wondering if this also fits the 1 series? (2019 plate) it has the same centre console part as the new one you fitted. But with me living in Britain it's just a mirror image of it haha

@bimmer-tech 2 года назад

Hey, unfortunately we can't confirm it would fit. It might be a little off by millimeters. It's best if you contact our support team at support@bimmer-tech.net with your VIN and they'll check if it's possible to add the charger.

@TheOppolite 2 года назад

Wondering the same thing.

@AliZandRU 4 года назад

Hi, what are the dimensions of the wireless charger. I have a big phone, wanted to see if it fits. Thank you

@bimmer-tech 4 года назад

They're about 6cm by 20cm or around 2.3"x 7.8". If you have a really big phone is still doesn't necessarily have to fit as a whole on the charger - as long as the QI coils line up it will work. Of course we can't guarantee a specific case.

@nickbrownfield3694 2 года назад

@@bimmer-tech Bump (after 2 years lol) Does the wireless pad protrude OVER the cupholder cover handle? As in, is the pad taller?

@martinfindlay7792 2 года назад

Is it normal for the standby light to always be on even when the car is locked?

@bimmer-tech 2 года назад

Turning off the light might be done in two ways. You can check the settings in the iDrive menu. There should be a possibility to force them to be off. The second is performing the full lock of the car - so the standby mode will be an intermittent state. This can be done by locking the car for at least 15 minutes and simultaneously having the car keys 10 meters away from the car. This will ensure that no power will be delivered to any unit, so the light will be off.

@KevinRodriguez-qt1xd 4 года назад

where did you get the panel? cant find anywhere thats around $50.

@bimmer-tech 4 года назад

It might have been pure luck - it was a local classified ad. We couldn't find a good deal on ebay that's for sure.

@dangerm0usse299 3 года назад

Aliexpress

@vascanandrei2769 3 года назад

Any idea what is that thing connected with the small plug?

@bimmer-tech 3 года назад

Hi! Can you give us the time stamp of what you're looking at?

@Zombie_Noc 4 года назад

Could work in a bwm f20 ?

@bimmer-tech 4 года назад

The charger shown in the video is made specifically for the 2016+ F3x chassis style - unfortunately it won't fit other platforms :(.

@jorgecarvalho9588 3 года назад

Hi guys, good video tutorial. Are you sure this charger does not fit on a bmw f20 LCI (2018)? The fit looks the same.

@bimmer-tech 3 года назад

We can check that. Please send your question along with the last 7 digits of your VIN to info@bimmer-tech.net

@TMIKEZY 3 года назад

Could it ?

@tspoon 3 года назад

Is it possible to order just the silicone mat?

@bimmer-tech 3 года назад

No sorry, it's not possible.

@GodKing804 3 года назад

Will there wireless products for the f10? Its such a pain to find a good spot to put down the phone, I don't have much hopes for a product

@bimmer-tech 3 года назад

It is something we tried developing, but it was not up to our standards. Perhaps we will try to revisit this again in the future! - Dylan

@GodKing804 3 года назад

@@bimmer-tech i agree, it's painful. I've seen some Alibaba "stick a qi charger on the cup holder lid" but naturally i need my cup holders lol Best of luck if you come up with a new design! Will definitely 👍

@champagne703 4 года назад

Can it works on a e70 X5

@bimmer-tech 4 года назад

The charger shown in the video is made specifically for the 2016+ F3x chassis style - unfortunately it won't fit other platforms :(.

@wilquk 2 года назад

What about the phone moving out from the charging pod when driving?🤔

@bimmer-tech 2 года назад

The pad is made of non-slip silicone material, so the phone won't be moving around when driving.

@ImageBySteve Год назад

Can you let me know the UK equivalent number for the UK version of the console replacement for an F32 please

@bimmer-tech Год назад

It's 51169218926.

@ImageBySteve Год назад

@@bimmer-tech , thanks appreciated.

@Zae.Clover Год назад

So where can I order that cup holder part from?

@bimmer-tech Год назад

You can order that from BMW dealer or search on Ebay for used one.

@bastiensaintemarie4397 3 года назад

Hello Is It available for bmw serie 1 2014 ?

@bimmer-tech 3 года назад

No, unfortunately it's only available for F3x BMWs.

@bersox 3 года назад

Where do you buy the central console

@bimmer-tech 3 года назад

You can buy it either from your BMW dealer or eBay.

@marshamk 2 года назад

hi will this charge thru a otterbox case?

@bimmer-tech 2 года назад

Unfortunately, we do not know any specifics about this product, it would be better to contact OtterBox.

@KhanHS 3 года назад

How fast does it charge? Has anyone done some tests?

@bimmer-tech 3 года назад

It depends on your phone usage during charging. If you'll drain your battery with GPS and CarPlay the charging can take longer. But in general it shouldn't be slower than 1% on 1,5-2 minutes.

@r2kerreurdecasting580 4 года назад

la console est différente à la coupure de la video. le début de la vidéo montre un rangement fermé et 2 portes gobelet ouvert. Ensuite, c'est un rangement ouvert avec une glissière cachant les portes gobelet. Est-ce normal? Cela fonctionne-t-il bien dans les 2 cas? merci

@bimmer-tech 4 года назад

Les plus vieilles voitures ont des porte-gobelets ouverts, et les plus récentes (depuis 2016) ont la glissière. Ca chargeur c'est fait seulement pour les consoles AVEC la glissière.

@r2kerreurdecasting580 4 года назад

@@bimmer-tech Merci pour la réponse. De ce fait ma F31 est de juin 2015. Peut-on changer la console pour en avoir une de 2016?

@bimmer-tech 4 года назад

@@r2kerreurdecasting580 Oui, en effet on l'a fait. On devrait acheter la pièce d'origine BMW 51169323675.

@r2kerreurdecasting580 4 года назад

@@bimmer-tech ok merci beaucoup

@irwanabdullah2481 2 года назад

Where can I purchase the charger... Any link on it.. I m in Malaysia

@bimmer-tech 2 года назад

Hello, here it is: www.bimmer-tech.net/products-wireless-charger-for-bmw You can purchase online, we ship around the world.

@e0969sum 3 года назад

Hi, just wondering if I once reconnected the battery, do I have to reprogram it or do some coding to it ?

@bimmer-tech 3 года назад

You do not need to do any of that. :) - Dylan

@caguyndc 4 года назад

Do you have to disconnect the negative power?

@simonlissek5739 4 года назад

caguyndc jes

@bimmer-tech 4 года назад

We always recommend disconnecting the negative terminal when retrofitting anything electronic.

@TonyJvideos 4 года назад

No, if you're careful, but at your own risk. You don't need to unplug the idrive panel either, just put it to one side.

@pablovergara778 Год назад

Does this work with Manual transmission?

@bimmer-tech Год назад

Hey Pablo, you can check the compatibility on our website by typing in your car's VIN :)

@graveborne8724 Год назад

I have a cigaretteport in that little... area where the wireless charger goes :/

@bimmer-tech Год назад

It doesn't mean it's not compatible with your car. You can check it on our website by typing your car's VIN :)

@Zae.Clover Год назад

Okay I have 2014 f34 how do I get this part?

@bimmer-tech Год назад

You can check if it fits your car by decoding your VIN here: www.bimmer-tech.net/category-wireless-charger-for-bmw

@Zae.Clover Год назад

@@bimmer-tech I did already and ig does fit I just need the cup holder part. Help!

@ScottParisi 4 года назад

Anything coming for the F83?

@bimmer-tech 4 года назад

As long as your F83 is a facelift model this charger will fit. All LCI (facelift) F3x & F8x chassis cars have the same center console. The best way to check is run your VIN on our website: www.bimmer-tech.net/products-wireless-charger-for-bmw

@ScottParisi 4 года назад

BimmerTech, says it's compatible with my VIN but my center definitely doesn't look like the picture. On a side note, I'm loving my MMI for wireless CarPlay.

@bimmer-tech 4 года назад

@@ScottParisi Can you send us a photo of your console to support@bimmer-tech.net - you made us curious to what it looks like. Please leave a note: For Mac ;) - if you don't mind of course.

@ScottParisi 4 года назад

BimmerTech, absolutely. Just sent them over. Let me know if you need anything else.

@hansyali_ 2 года назад

Will this work for 2018 330i ?

@bimmer-tech 2 года назад

Unfortunately not.

@TarekElsakka 2 года назад

@@bimmer-tech Why not? The 2018 330i is a F30 LCI not a G20. I have the same car but 2016 and I am planning on ordering this.

@nikone4129 3 года назад

Just tried this with a 2014 F30 320i and I cannot get the panel to snap back in. It's always sticking to far towards the driver for the clips to snap in. Super frustrating. Not sure what I am doing wrong. The wires are out of the way, but it will not clip in properly. Uggghhhhh!!!! [EDIT] This DOES NOT work on the 2014 BMW F30 320i. The clips are slightly out of place and the unit is a few mm too long. I tried 100 different ways and could not get it to snap in. The 320i OEM unit snapped back into place just fine, but not the 2017 F30 LCI model. Cables were not the issue, as I placed them in dozen different ways. Really sucks, because I was so looking forward to it. Almost $200 spent for nothing. :( :(

@bimmer-tech 3 года назад

@Nik One, sorry to hear that! Can you please reach out to our support team through our contact page: www.bimmer-tech.net/page-contact

@eliasbagueste 3 года назад

You have to cut some pieces to fit perfectly when you come from preLCI as this post says: f30.bimmerpost.com/forums/showthread.php?t=1027008&page=6

@nikone4129 3 года назад

@@eliasbagueste Thank you following up on this. It's sitting in a box, but boy, I would love to have this thing in my ride. Mucho Gracias Amigo! P.S. Can you tell me what page that is mentioned? That thread goes on for pages and pages.

@eliasbagueste 3 года назад

@@nikone4129 It was mentioned on page 6 at the end, I put the link on page 6, I just made the 2 cuts of the photos of the post on my 2012 F30 and it fit me perfectly.

@shwpeters 2 года назад

@@eliasbagueste I got the new trim piece, but it hasn't got a socket to plug in the keyfob antenna plug (the small plug with black/white cabling). How did you solve this on your mod?

@martinfindlay7792 2 года назад

How the hell did you remove those buttons that easy? My fingers are killing me and I gave up 😄

@bimmer-tech 2 года назад

A matter of practice ;) Maybe this video will help you out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--P_HVtWcbDg.html

@SubieSpecial 2 года назад

Need a way to keep the phone from sliding off. The mat doesn’t help.

@bimmer-tech 2 года назад

It mostly depends on the phone placement on the charging mat. It also depends on the material the phone’s back is made of and the shape of its back.

@franciscosoler6372 3 года назад

After installation, warning sign for stability malfunction, is this normal.?

@bimmer-tech 3 года назад

Hey. If you have disconnected your battery during the install, you might need to initialize your steering angle sensor. Power cycle your car a couple of times, also make sure to turn your steering wheel lock to lock a couple of times while power cycling the car. The sign should go away. Alternatively you can use a code scanner to erase the code.

@BlackEagleGermany 4 года назад

At this position I don’t have a good look on my phone and can press on it or use Face ID to unlock. There are many other smartphone holder there are better as this solution. 😉 and when I am drifting it flows away 🙄

@bimmer-tech 4 года назад

Not that big of a deal when you have wireless CarPlay ;). Seems like we attract a lot of drifters with this video ;)

@suhaib697 4 года назад

That’ll fly around when your doing donuts

@bimmer-tech 4 года назад

You're right about that. We can add a velcro version for pro users if there is a market.

@grocerylist 4 года назад

@@bimmer-tech That velcro version from BimmerTech would probably be an extra $300.

@bimmer-tech 4 года назад

@@grocerylist We'll do it free of charge upon request :)

@user-gy1lp4gi4y 3 года назад

The unit that you removed from the car is different from the one you installed !!! The first is for the 2012 model until 2014 and the second is for the 2015 model and above.. Why deception???

@bimmer-tech 3 года назад

We've mentioned in the video that the wireless charger doesn't fit to the center console with cup holders from pre LCI models - and that's why we've changed it for a new console without the cup holders.