How to Revive a Dead Drill Battery. EASY!!!

Подписаться 5 тыс.

Просмотров 1,4 млн

50% 1

I made the mistake and said “positive to negative”. When you hook the battery up connect positive to positive and negative to negative
In this video I will show you how to make any drill battery that won’t charge, charge!
Do not attempt! This is for entertainment purposes only! I am not responsible for any damage to your charger, batteries or drill. I am not responsible for any bodily harm or damage to property. Please do not leave battery unattended while charging
Ignore:
How to fix a dead drill battery
How to jumpstart a drill battery
How to revive a dead power tool battery
How to revive a battery that won’t charge
How to fix a drill battery that won’t charge
How to revive a dead rechargeable battery
How to revive a dead lithium ion drill battery
How to revive a dead NcId drill battery
Restore old drill batteries for free
Revive Dead 18v dewalt drill battery
Bring a dead drill battery back to life
How to make dead drill batteries charge again
How to make dead batteries charge again
Drill battery repair

Развлечения

Опубликовано:

20 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 456

@tariqkhan-kiyani3948 3 года назад

Great video. Just one question, and sorry if it sounds like a dumb ass one. You said put positive on negative! Did mean what it sounded like or did you mean "put positive on and negative on".

@TUNED2.7 3 года назад

Yes. Sorry for the confusion. I realized I said it backwards after I finished filming

@livenotonevil8279 3 года назад

@@TUNED2.7 It would be really beneficial if you dubbed that in somewhere, if possible. Maybe in the description at least.

@TUNED2.7 3 года назад

Didn’t even think of that. I’ll put it at the top of the description

@reacew7624 3 года назад

He was stating what one he was hooking up with some speed

@gordonlam2757 2 года назад

get a voltmeter and touch the nodes if it reads negative then you know you reversed the positive and negative

@JHEEENN 2 года назад

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

@brettburleson6168 Год назад

Making use of the ru-vid.comUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

@TUNED2.7 Год назад

I’m not too sure. Check a parts store for some corrosion cleaner. It’s acidic and will clean the corrosion really good

@darthires9506 Месяц назад

I tried it on a Craftsman battery #1301341 that fits my Craftsman 19.2 volt drill model 973.113400 that I bought in the early '80s. I ran the procedure 3X. It did not work for me. I loosened the top of the battery, many of the nickel-cadmium cells had leaked with a buildup of what came out of it. I had a few other battery power tools from Harbor Freight with dead batteries that I bought in the late '90s and early '2000s. It worked on all of these power tools. Thank you

@tedsmith6137 3 года назад

NiCads and NiMh battery cells can reverse polarity if left flat too long. Giving it a short hard voltage boot like that can sometimes restore the correct polarity of the dud cell. Yes, it can work.

@chevy3022 3 года назад

I just tried this and it works 👍. Thanks for the video!!!

@wtmerit6129 3 года назад

Excellent. You've done a service. Thanks👍

@roger3958 3 года назад

Yes, I love you! I hooked my dead vacuum battery to my car battery for 30 seconds then hooked it back up to the standard charger. It's charging now as I type. The blinking error light is completely gone. Thank you, thank you, thank you!!! Funny thing is, Hoover just sent me a new one on warranty. Now I have 2...sweet!

@TUNED2.7 3 года назад

Nice. Glad it worked out for you

@chrissewell1608 3 года назад

This occurs with a TON of new SMART battery chargers! The charger will not start, if it reads voltage below a certain limit (like 5 volts?) The battery may still be good, just really low in voltage. If you give the battery a jump, or boost, bring up the voltage to like 7 volts? Then the charger will recognize a good battery, and start charging it all the way up! Then it stays in a float charge mode. Dewalt, Ryobi, etc. won't tell you this, because they want to sell you a New $100 battery! Because that is how they make money! Eventually a battery will reach the end of its life span. That is when you can rebuild the pack, with new battery cells! ($30.00) Or finally spend that $100.00 Thanks for sharing this tip!

@zounds010 3 года назад

I think the assumption is voltage below threshold=at least one cell is damaged. That's a reasonable assumption if the cordless device monitors the batteries and will switch off when the voltage gets too low (i.e. you don't use the battery until it's flat). Then the edge case where the battery voltage is below threshold but the cells are ok (and the trick shown in the video is safe) happens only if you leave the pack without charging it for several months. Charging a damaged cell is a recipe for disaster though, and Li-ion fires are difficult to extinguish.

@chrissewell1608 3 года назад

@@zounds010 Good point! But how do you tell the difference, between a battery pack with a bad cell and just a dead battery? Without attempting to charge the battery packs? Or even after charging the battery?

@jhard3508 3 года назад

But if the battery gets that low the battery has some sort of damage. If you discharge a battery it will not drop below a certain threshold (chemical dependent lithium, lead acid, etc) unless it sits unused or uncharged. That’s why it doesn’t charge with its regular charger for safety reason. And when you put “volts” on the battery and if it does charge it doesn’t hold the charge. Second how is it the company trying to beat you out of $100 if you improperly maintained the battery and it died?

@jhard3508 3 года назад

@@chrissewell1608 Honestly you know you’re at that threshold when the charger declined to charge the battery. Charger these days are smart enough to know either by the charge to discharge rate as it charges or by the batteries reaction as it charges. Ex. If you put a battery on charge and the voltage spikes and doesn’t level or if you charge and the battery voltage doesn’t increase for a certain amount of time the charger stops charging. Some chargers even detect temperature

@zounds010 3 года назад

@@chrissewell1608 You can tell the difference is by measuring the battery voltage after charging. If it stabilizes at a lower voltage than you'd expect (e.g. 10.8V for a 12V battery), you know one of the cells is defective. A better way is by disassembling the battery and then monitoring the temperature of each cell. Another indication is the time elapsed since the last time you charged it. Battery was charged yesterday and won't charge today?->defective cell and unsafe to charge. Battery was last charged 6 months ago->this trick might work.

@PIANOSTYLE100 3 года назад

I used to work on Tvs etc.I ran into this video. I am subscribing. I am sure I can learn something from you.

@silverstreetmoto1458 3 года назад

Nice one 👍 got a couple of old ones in the shed to experiment on,thanks man.

@TUNED2.7 3 года назад

Thanks for watching. Please subscribe if you haven’t already!

@buddyv3457 2 года назад

Thank you, Sled Nation!!! Just revive a DeWalt battery, using your instructions!!!

@colinpovey2904 3 года назад

Thanks. Exactly my problem. Will try this later this week.

@MD-gc4xq 2 года назад

Brilliant just done it with a makita battery and it’s now working 👍👍

@luxurycarkey7207 3 года назад

Wow i was about to throw my batteries an drills away i could not charge them thank you so much...keep up the good work you are really helping people...

@Tre16 3 года назад

No need to throw out the drill, just get a new battery if this doesn't work....

@johnwasik1186 2 года назад

@@Tre16 I tried that but the battery was more money than a drill plus the battery with Dewalt. That’s why I threw all my Dewalt tools in the trash and bought all Ryobi tools. Especially when my 24 year old Ryobi Drill batteries still hold a charge…

@robinsessoms7428 2 года назад

@@johnwasik1186 They sell a battery converter, I hear pretty reasonable. Dewalt to Roybi, Dewalt to Milwaukee Etc.......

@johnwasik1186 2 года назад

@UCP5zezgfsuWUgPwN_4555IA Yea, I understand that they may have bought Milwaukee tools also.

@audioartisan 2 года назад

Unfortunately I got rid of my old pack, and now I wish I wouldn't have. Appreciate this tip for my future pack problems :)

@dave5833 3 года назад

Thank you for bringing this to us!! :-))))))

@adriancantu293 2 года назад

I did it with my car battery and it worked like a charm. I brought it up from 0 volts to 7.32 volts. Then I plugged it into the charger and now it is charging normal.

@sandrajohnson2489 2 года назад

Great idea! Thanks for sharing!

@sweetbeat7 2 года назад

Wow !! it worked on my dead Bosch 18v Li ion !! Was dead for years now it's fine !! Subscribed 💯💥🙏

@TUNED2.7 2 года назад

Thank You!

@jesserenteria7773 3 года назад

Thank you for sharing this information bro it's very useful and helpful 👍

@TUNED2.7 3 года назад

Thanks for watching!

@zoozolplexOne 3 года назад

Cool tip. Very useful !!!

@adamsrelic Год назад

Lazarus, come forth! Thanks for the tip. Will definitely use this to try and salvage a few Greenworks 60V batteries that are saying defective.

@nigelbutler9566 3 года назад

Worked perfectly, many thanks

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@chrisokeeffe7624 3 года назад

A good fully charged drill battery can be used too. The process is to put amperage in the dead battery so the charger will sense the amperage and charge the battery again.if the charger dosen't see the battery amps it won't charge and indicates the battery is bad.

@happyguy7605 3 года назад

Good idea man, got it now, thanks!

@Teknopottu 3 года назад

It's not about amperage but voltage, otherwise true.

@whatthe2458 3 года назад

So that’s positive to positive and negative to negative, wait awhile, then place back on the charger? (two battery method )

@dannylinc6247 2 года назад

Amperage is the flow. Voltage is force applied. The charger may be equipped to sense voltage and uses dropping resistors to vary it's action. Cheaper components may not be well equipped and throwing them out may be safest. I know a guy who still has "that smell" in his garage from leaving cheap rechargeable batteries plugged in charging. Great spotlight beam when you need it. Don't leave it plugged in unattended.

@edpowell5754 3 года назад

Thanks for showing this video Pal, THANKS.

@TUNED2.7 3 года назад

Thanks for watching. Please subscribe if you haven’t already!

@micwyn Месяц назад

⁠@@TUNED2.7ihh but u B u by

@richardlewczykjr1022 3 года назад

What amp setting on the charger did you use some chargers have two or more setting choices?

@RebelWithACoz 3 года назад

Fabulous. Worked great.

@TUNED2.7 3 года назад

Thanks for watching. Please subscribe if you haven’t already!

@barriewilliams4526 3 года назад

Works the same with a dead car battery. Just add another battery connected in parallel, this will fool the charger, which will then charge both batteries😁

@Chrisinpa 2 года назад

You're a friggin genius!

@josephlopez3361 2 года назад

Looks great I wish we could do it on the newer batteries

@robertking9552 3 года назад

I have took them apart n use small brass brush n cleanen corrosion off terminals too

@duaneantor9157 3 года назад

That's not the problem. The problem is inside the battery. That corrosion is minor battery leakage.

@arthurtmorgan4211 2 года назад

Good job mate! Ta for the info!

@thangknowa2567 2 года назад

Like most new chargers today, it needs "Exciter Voltage" from the battery to initiate charging. No volts from the battery "Indicates" a possible short, thus a forced charge could lead to explosion. Hook up an older charger to a shorted battery and YOU will have a problem!

@hermpasker4680 2 года назад

I had a Ryobi 18 V battery that sat in my garage for over 18 months that would not take a charge. The "Fix" was fast...easy & safe. I used my 12VDC trickle charger ..held the "+" & the "- " cables to the battery posts for slightly over 2 minutes. I then put the battery into the Ryobi battery charger. The charger "Testing" cycle ran a little longer than normal then it started the charging cycle ! I did not do any disassembly ...I didn't drill any holes !

@justinlamb3822 3 года назад

It worked. Thank you so much! You earned a new subscriber

@TUNED2.7 3 года назад

Thank you!

@telemark22 2 года назад

You can often get them to charge by taking it off the charger and putting it back on. Eventually, those few minutes before it goes to fast flash build up enough charge to convince the charger to stay in charge mode. Then after it shows fully charged, charge it again. It may charge it to 9.6V the first time, then 12V, 14.4v before finally charging an 18V to 18V.

@Brad-0212 8 месяцев назад

Your not wrong your right I’ve done this a few times before as I do them quite a lot so I’ve tried that but sometimes there that flat they refuse so we boot the shit out of it with a 18v pack now you’ll charge 🙄😉😉😂

@tomm1758 3 года назад

What amp setting do you use on the charger?

@hifinsword 2 года назад

This only works if a battery has a cell or cells discharged below a minimum voltage that the charger will recognize. If the battery is at its end of life, it may only charge it for a short time or not at all. With the Lithium Polymer batteries I use that have fallen below a minimum, I change the chemistry from Lithium Polymer to NiCad or Lead, and it will pick up a charge because the minimum for them is lower. Once the cells are above that minimum, the charger is happy to continue the charge with the right chemistry.

@thomasschwarting5108 Год назад

Interesting!!

@barrykery1175 3 года назад

Good video. I just use a small wall wart supply. But, I have to leave it connected about a half hour. Once the voltage in the battery comes up a little, it will take a charge. I've been doing that for some time with my Craftsman 14 volt battery for my drill. Since I can't get these batteries anymore, I got rid of everything related to those batteries. I've changed to Kobalt that has a 3 year warranty on all of their batteries. Barry

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@amanofmanyparts9120 3 года назад

Both my chargers are so-called _smart chargers_ in that they detect the type and voltage of the battery before attempting to do anything. If the perceived voltage is too low (under 5 volts), then nothing happens even though they are both rated to charge 6, 12 and 24 volt packs. In the past I've used them to charge up the batteries on my mobility scooter, either as a 24 volt pack, or bridged out as a single double amperage 12 volt battery. The latter useage is to 'balance' both batteries so that neither has to work harder than the other in normal use. Fortunately I have so many still useable traction batteries (short term) that I can make up packs from 12 volts up to 48 volts. At least one of those combinations should be quite sufficient to kickstart the normal charging process.

@803dj5 2 года назад

With my car chargers not working I put the jumpbox on it then the charger will kick on after 20 mins or so I can go back over and cut the jumpbox off and it will stay charging. Plus side is when jumpbox is hooked up it charges both lol

@cathywoodell7368 3 года назад

Good to know. Great video.

@gustavelaughnowcrylater5309 2 года назад

I tried this and it works. We had like 15 dewalt batteries. On a table for 2 years. My coworkers saw me do it. All of the batteries disappeared 🤣🤣🤣

@garyclifton2180 3 года назад

Would this work on mobility scooter battery's

@johnsmith-lx9lw Год назад

Thank you I hope it works, I have never bought another Dewalt the battery did not last a year, I only use them once in a well.

@rogerbelanger7990 3 года назад

I will try it tomorrow with my hilti battery which won’t charge anymore,thanks é

@JT-SE-OHIO 3 года назад

I have done this but used two car batteries hooked in series, to get 24 volts. It did work but the drill battery still wouldn't hold the charge for very long. You could use it but it would lose charge overnight. If the charger is like a golf cart one, they have to sense some power from the battery before it will work. I bought a golf cart and was told the batteries and charger were both bad. It had six, six volt batteries and the charger was thirty-six volt. I filled the batteries up with water and used a twelve volt charger on two of them at a time. After I had them charged then the cart charger would work. I used it for a couple more years on those batteries before I replaced them. I have a hard time with drill batteries just because I don't use them enough. The last two I bought online, because of price, were junk. Beware. Thanks for sharing.

@azamiqbal3027 Год назад

Very good, thanks.

@robertmckinnon7245 3 года назад

It so totally works, just did the battery to battery jump,to a full charge and works again, saved me some money, thanx a bunch

@TUNED2.7 3 года назад

No problem. Please subscribe if you haven’t already! Glad to help

@robertmckinnon7245 3 года назад

@@TUNED2.7 I'm not sure who would give a thumbs down for the information you gave..saving people money is awesome.

@Hundert1 3 года назад

I have Ryobi lithium ion batteries like that. Will it work? Will a NOCO Genius G26000 charger also do the trick? Thanks

@grolfe3210 2 года назад

All you have done is manage to get over the charger having a smart cutoff and not charging the defective battery. You get it charging again, but you still have a defective battery when it runs down again.

@michaeld1906 2 года назад

I wonder if this will work for the ni-cad batteries for my RC cars ???

@Sparky68M 3 года назад

Makita Li-ion batteries have a chip inside that locks out the charging if it detects it's cells are below 3.2 volts flashing green led on charger more than 3 times will lock it ! you could buy these replacement chip boards on ebay for around a £5

@dannyvictory7789 3 года назад

What amps on charger u use

@rayvantassel6279 2 года назад

Very cool thanks

@driverslqqk7940 3 года назад

Great video I got about five drills with batteries that are junk that I'm going to go try this on see how it works it's a shame they build those things the way they do to rip off the consumer who has the courtesy to buy their product and it's treated the way they are by the company with junk batteries thank you.

@soulfuzz368 2 года назад

Can we get an update? Were you able to save them all?

@michaelmiles6398 3 года назад

What setting was the battery charger on?

@raynic1173 2 года назад

What amperage or setting did you have the charger set to???

@jorma990 2 года назад

Would this method work on a 37v Stihl lithium battery?

@handlethiscanadianbacon 3 года назад

This just gets the voltage up enough in the battery for the charger to see the battery and start charging. You still need a new cell or a whole new battery eventually. Great trick to make it last a little longer.

@xchin8016 3 года назад

Trying to get a new battery for my b/d with out luck so I will this method in the coming

@TOMS-ux4zp Год назад

I have one 18v drill battery the rest are 14volt drill battery as bought a new drill can you use the 14 volt battery to kick start the 18 volt drill battery? I still have the 18 volt charger so once its kick started I could put it in the 18 volt charger! To charge!

@ffcorona 2 года назад

What setting did you put the battery charger?

@scor440 3 года назад

Is the charger set on 2 amps?

@davepetrie7221 2 года назад

What voltage do you use 6 or 12 ?

@gergemall 3 года назад

Wow, thank you.

@jeromebreeding3302 3 года назад

I fail to see how charging with a car battery differs from the charger supplied with the drill. It converts AC house-current to DC. What's the difference ?

@Teknopottu 3 года назад

@@jeromebreeding3302 Both are DC. The battery charger does not recognice the low voltage battery as battery at all. Jumping it with car charger rises the voltage for a while so the original charger "sees" it and begins to charge again.

@jeromebreeding3302 3 года назад

The nicad batteries now used for these cordless drills, should be offered with lithium versions instead, the consumers might get a fair shake.

@petestreet7535 2 года назад

Does it have the same power/last as long as a relatively new battery?

@ZBFLEX 2 года назад

Timing is so important in life. Just watched this video today and yesterday I threw out two dead 20v DeWalt battery packs.

@d.b.cooper1292 2 года назад

Ain’t that how it goes haha and if you kept them you would have never seen this video haha

@billdrigun2479 2 года назад

What gauge wire are you using with the alligator clips?

@TheUnvarnishedTruth- 3 года назад

I think what's happening is that on a battery that will not take a charge, tiny tendrils (strands) of resistive material form. They are called DENDRITES. They prevent the voltage from flowing through the battery correctly to be able to charge it. When you connect a high-powered charger to the battery, it burns the DENDRITES away. This allows the battery to accept a charge again. It might be true that your battery may not have quite as much life left in it as it used to, or that it won't last as long. But at least that's better than having to throw your battery in the garbage can. Also, do not leave your battery on the charger all the time! Once it's charged, take it off the charger! Your battery will last longer that way. And your charge will last longer also.

@Teknopottu 3 года назад

Great tips but in this case perhaps the voltage of battery was too low for the charger to recocnice it as correct battery. Jumping it with something rises the voltage so the original charger "sees it" and can get to work.

@ssnerd583 3 года назад

VOLTAGE does NOT flow.....CURRENT FLOWS...

@TUNED2.7 3 года назад

Correct. Voltage is pressure and amperage is flow (current)

@TheUnvarnishedTruth- 3 года назад

You are correct, current flows. I knew that. I was just trying to make it easier for the average person to understand the concept. I guess I should've just told the truth! LOL

@jssamp4442 2 года назад

@@TheUnvarnishedTruth- You really don't want to turn over that rock, trust me. The truth is most people have no idea about how electricity works at a more fundamental level. They imagine electrons flowing along a wire and that it is the wire that carries electrical power. It is better not to upset these notions for the majority of people.

@philiprea8340 3 года назад

what amperage on the charger?

@garylake9317 3 года назад

How many amps is the charger?

@NUGGETSHOOTER 3 года назад

going to give it a try

@TUNED2.7 3 года назад

Let me know if it works for you. Thanks for watching and please subscribe if you haven’t already!

@raymondrouthier3920 3 года назад

Nice job

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@gregchaney2004 3 года назад

Thank you. I'll give this a try. Greg Chaney in coastal N.C

@fireside007 2 года назад

YOU ~ ROCK ! !

@duaneantor9157 3 года назад

I tried this on myself. I still feel old and run-down.

@SueDohman 3 года назад

Sounds like you plugged the wrong hole.

@duaneantor9157 3 года назад

@@SueDohman keep drinking, that made no sense.

@SueDohman 3 года назад

@@duaneantor9157 The last person who told me that, “I made no sense” lost their sense of smell, taste, touch &……smell again. So you may wanna vet who you say crazy sh*t like that to, first, before you say crazy sh*t like that, to, some senseless bastard. That’s what don’t make no sense to me!

@duaneantor9157 3 года назад

@@SueDohman knock it of, you're scaring me internet tough guy. lol

@duaneantor9157 3 года назад

Did he just call himself a senseless bastard. His ramble made as much sense as his last one.

@pjysmr 10 месяцев назад

I tried my defective battery pack and used an adjustable regulated power supply. It worked well afterwards.

@victoraa8682 3 года назад

thank you

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@edward9862 2 года назад

How many amps were coming from the charger?

@Anonymous-jm3mg 3 года назад

I heard it has something to do with crystalized buildup and the higher voltage sort of neutralizes or burns the crystals off and then you have clean contacts.

@chrissewell1608 3 года назад

Never heard of that, ever! Sounds like internet B.S.

@duaneantor9157 3 года назад

Yup! That's what happens.

@duaneantor9157 3 года назад

@@chrissewell1608 it works. Been doing it for years.

@r33gts 3 года назад

Yes,they are called"dendrites"!👍

@jayrussell9256 3 года назад

Great to know!!!

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@rogerbranch8837 3 года назад

Awesome thanks

@marksill8020 3 года назад

What setting did you place the battery charger on? 12V? Slow trickle? Fast charge?

@TUNED2.7 3 года назад

Jump start

@telemark22 2 года назад

I think it would be safer for the battery pack to use slow trickle and take a little longer.

@geronimooliva5133 3 года назад

Good to know... thanks.. lots of likes...

@kmsmaym 2 года назад

How many volts are the batteries and how many volts are you charging with ?

@donvoll2580 2 года назад

Good day Done that once with another battery , charged, 1-2 days later battery was dead again. Did you battery hold up, have u still got it? Thanks

@berkosmansatiroglu 3 года назад

You can use welder + and - with just shocking style.

@davea5150 2 года назад

How come my battery for my drill shows the green light which means it is fully charged but when I use it the battery goes dead before using it. Does it matter how old the batteries are.

@stevemorris6855 3 года назад

My neighbour threw out a makita that seemed as dead as a doornail, I now have a makita that is as good as new. £150!😃😃😃

@TUNED2.7 3 года назад

Thanks for watching! Please subscribe if you haven’t already!

@butthole4185 3 года назад

The battery was dead so he threw the drill in the trash?

@duaneantor9157 3 года назад

Where is your neighbors garbage can? I want to hang out there.

@stevemorris6855 3 года назад

@@duaneantor9157 🤣😂

@Bart-Did-it 3 года назад

I love this but 90% of mine catch fire a little or smoke out before they can be revived but thank you for the tips 👊🏿 ⚡️.

@dkoch1271 2 года назад

Since the battery cost over 100 bucks nowadays thank you very much.

@65ANDRE 2 года назад

great video. I have a few of various kinds of batteries that have completely died. I was on the verge of buying replacement batteries. Think I'll try this first.

@rogersiples3335 3 года назад

Absolutely too cool. Thanks.

@wewillie46 2 года назад

What voltage you use

@snakemadness4553 3 года назад

Well I'm give it a try . Thanks

@worldbiss1831 3 года назад

Excellent demo and idea! Do we need the car battery charger and Drill battery to be in same Voltage specs?

@TUNED2.7 3 года назад

I’m not even sure. I’ve only done this on one battery

@worldbiss1831 3 года назад

@@TUNED2.7 oh..let us know later if u could still remember those specs you done with. ☺

@duaneantor9157 3 года назад

The higher the voltage the better. I have a battery rejuvenator that zaps the battery with a few thousand volts. You should see the sparks fly on a very shorted battery.

@zounds010 3 года назад

@@duaneantor9157 This is terrible 'advice' and likely to destroy the battery.

@SgtJoeSmith 2 года назад

@@worldbiss1831 use a stick welder

@lizlandry3388 2 года назад

What are you connecting to on battery? Mine looks similar but only has side flat metal pieces that I can’t attach the alligator clips. Help!

@TUNED2.7 2 года назад

I used a jump box with some smaller alligator clips attached to it so I can connect it to the battery

@bh8365 3 года назад

I have a device that jump starts a car battery. Wonder if that would work? Might try.

@TUNED2.7 3 года назад

That’s what the box I was using is meant for. It’s called a booster box

@larrywhalen596 3 года назад

Sled Nation: Same here, I ended up with five drills and screw guns like that, two Makita, two Ryobi, and a DeWalt from guys who work construction and didn't have the time or patience to bother with them because of their work at the time, so they would give them to my Son who was a newbie at the time; if something can be repaired do so. BTW, my house and new cars and motorcycles are all paid for, took awhile, BUT I've learned to never fritter away money from the days when I had to bust my ass making a living.

@jimzito9777 3 года назад

@@larrywhalen596 a dollar saved is $2 earned when you figure taxes and all! Save those $$ for your kids college. Believe me you'll need them!!

@captanehook6927 3 года назад

Yes this allows the battery to charge but... Run time is considerably shorter than a new or rebuilt one.

@Teknopottu 3 года назад

Revieved something is never as good as new one but works somehow 'till you repair or get a new one. That is if you need to. Someone perhaps does not afford always the newest or the usage of battery is so part time that so-so-working does the job.