How to Sand, Polish, and Finish Resin Dice

Подписаться 3 тыс.

Просмотров 80 тыс.

50% 1

So you're cast your dice using the mold making techniques you've seen here or on some other channel, and now you have a die with a chunk of resin hanging off of one corner that makes it unusable! Don't worry - casting your dice is only half the process. Today, we're going to tacking sanding, polishing, and finishing your dice to get them ready for the world!
I'm creating these dice for Loot Tables, where you can purchase them and so much else! Check it out here: loottables.com/
===== LINKS TO PRODUCTS =====
Art n' Glow Resin: amzn.to/2tILl50
Sorta-Clear 37 Silicone: amzn.to/2uDaONB
Sandpaper: amzn.to/37Qff63
MicroMesh: amzn.to/2R2FWxr
Polish: amzn.to/2tIKXn4
NOTE: These are Amazon Affiliate links, so if you use them, you help me out!
---
Welcome to Michael Makes, where I will take on different DIY projects and create products through small scale manufacturing to sell online!

Хобби

Опубликовано:

9 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@kelbh 4 года назад

You and Rybonator are really not helping my dice gremlin tendencies with making this process look so simple 😂

@MichaelMakes 4 года назад

Oh no.... I apologize in advance for one of the next couple videos...

@Gregatron13 Год назад

But it's soooo fun! I just completed setup of my pressure pot and my first set was great. The hard part is being patient enough to give it 12-24 hours in the pot 😝

@MKayJay 4 года назад

I started looking at Rybonators videos and they are great, but I really love how well you explain the process here. I've refrained from jumping into this as the part after taking dices out of the mold seems hard (for a butter finger like me), but watching this, I'm reconsidering. Thanks :-)

@MichaelMakes 4 года назад

Thank you so much!! If you’re interested I say get started! It’s a fun hobby to create stuff!

@magicfighter1025 3 года назад

Notice how he uses ruber bands to keep his molds together....scary Its like I am looking at a dice nightmare

@magicfighter1025 3 года назад

Although nothing wrong with that, but I can go wrong sometimes

@vampcaff 2 года назад

@@magicfighter1025 if you knew how molds work you'd understand the rubberbands.

@Know-Expert 3 года назад

Found you by accident but after reading your channel description decided to check out what you do … I decided to subscribe because I think we share that love of craft and creation….. well done

@Noirfury 2 года назад

Beautiful dice

@doraima29 2 года назад

I am.subscribed to Rybonator. I subscribed to you because I like how you explained the whole processes more clearly and tapping in small details.

@enchantedlynx9381 4 года назад

Very helpful, thanks!

@Mystic_Kal 3 года назад

If you wet the sandpaper and lay it on a sheet of glass you can guarantee that it stays perfectly flat and even

@PrincessPrudence21 2 года назад

Thanks for the info I have gotten into making dice and I use a different mold than you do and trying to learn to get my bubbles out and I think I got it but not the polish and sanding part. Tha k you

@jakesells2379 4 года назад

Great informative video. One suggestion: safety glasses. Especially when cutting with the snips and exacto. Keep it up. 👍

@potatoqueencalamity 4 года назад

You are a life saver

@8L0ND1E_WOLF 4 года назад

Can you please link a video of how you get this color when making these specific dice? I love the nebula color , and I would like to know how to get that color in dice making.

@a.b.4317 7 месяцев назад

these are perfect cubes. A real game/roll die is the intersection of a cube and a sphere (e.g. cube size 1, sphere diameter1.4) . Nevertheless, great video, I learn a lot :)

@power_fandom2326 3 года назад

Does MicroMesh give a better result than regular sandpaper? i bought a set of unfinished dice and i dont have the suplies to finish them yet.

@KahwahShutseh 2 года назад

Do all sides need to be sanded for a nice polished finish?

@dustinoquinn7899 Год назад

Question for you, how do you get the color like that on the uv dice? The purple & blue ones.... what brand of ink, color, etc....

@IEnoro 2 года назад

What can I do to remove the resin dust from crevices in my die? Almost all my numbers and even surfaces end up with a white dirty-looking film on them that i can't remove

@hktdiycrafts7241 3 года назад

good video and interesting. nice to interact with you.

@zoraknme 4 года назад

Great video! I couldn’t find any links to the on-demand 3D printing place. What company was it again?

@MichaelMakes 4 года назад

The Blue Mimic! www.etsy.com/shop/TheBlueMimic

@danamauck1548 2 года назад

Do you have written directions/ steps on these? Thanks

@corynpatterson4790 3 года назад

Question! Do you still end up with super tiny blemishes at the end?

@rikatana 2 года назад

Do you sand all the sides of a dice?

@randomizedcontent9461 4 года назад

My dice got scratches how do I fix it

@videogamefreered 4 года назад

Great Video! Super quick questions about sanding: Do you only sand the sides affected by the sprew or all the sides? Also do you sand the entire face of a dice? I heard somewhere that sanding over the numbers would ruin it, wanted to see if it was true before I went too far in the deep end!

@MichaelMakes 4 года назад

I only sand the sides affected by the sprue, but I polish every side with the Plastix polish to avoid any dust or small dirt sticking to the die.

@cartotech81 4 года назад

You have to remember that when you make a mold from masters it will show every scratch. You should always sand every side of your masters, not just the side touching the sprue. If you get your masters like glass you will have way less to do when you make dice from your masters. Polish won't hide the issues.

@rikcarlsen1009 3 года назад

Anyone able to find the link for his craft pruning shears? searching amazon just gives me garden tools that would be too unwieldy for cutting sprues

@MichaelMakes 3 года назад

I actually grabbed those at a Michael's, so I wouldn't have the exact brand online, sorry!

@RookBytes 4 года назад

10:31 A-M-A-Z-I-N-G !!! Holy smokes what a fantastic job. You sell these?? Take my money! =D

@MichaelMakes 4 года назад

YEP! Links are in the description!!

@RookBytes 4 года назад

@@MichaelMakes They're OUT of STOCK! loottables.com/product/ultraviolet-resin-dice-set/ Can you make me a set? I could just buy them straight from you.

@luna_rivalz6594 Год назад

New dice maker here, Does it matter when using masters to make your own mould do you need to have the masters shiney to make shiney dice or could they be matte? (Stupid question I bet but I’d love to know)

@Slayer_K_ Год назад

The masters don't HAVE to be polished but if you want the final product to be polished and shiny than you'll have more sanding to do later

@galacticcentercore 2 года назад

Totally sounds like Legundo, even the mannerisms and vocal pattern. Even looks like the guy.

@MichaelMakes 2 года назад

More hair though.

@lizziepaine6848 3 года назад

I followed your technique but after polishing, my dice are still very matte and dull. Any tips?

@Reploidx9 2 года назад

Rotary tool and polish really helps from my experience

@KeenKong9000 4 года назад

You kind of glossed over the buffing part. Are you just using the microfiber rag to remove the PlastX? Something more involved? Thanks!

@MichaelMakes 4 года назад

You should check out my updated video! I've learned a lot from this original one!

@mikecurrie1975 4 года назад

Who did you say makes the custom dice mould?

@mikecurrie1975 4 года назад

Nevermind, I found it. The Blue Mimic on Etsy. Thanks for the lead!

@franzpop870 4 года назад

Do you make custom requested dice?

@MichaelMakes 4 года назад

Not at the moment with the Kickstarter coming up and a bunch of orders to fill, but maybe some day soon!

@josh1234rulz 3 года назад

Where can i get mold like that? I cant make them myself

@Dumpknoedel 3 года назад

blue mimic on etsy i think

@katherinee.9105 3 года назад

hi, i had a quick question. how do you get the polishing paste out of the numbers on the dice? i've been having so much trouble with that.

@Jomadis 3 года назад

Ive been using toothpicks! It’s tedious, but it’s the best method I’ve found

@vampcaff 2 года назад

Use less polish

@evelyn8102 2 года назад

Ugh all of my dice still end up with super matte faces that contrast to the glossy un-sanded faces. I used from 120 all the way up to 3000 with zonas polishing and the plastix. I dont know where im going wrong

@dionnesimoneissmitten4436 Год назад

You need to go even higher on your grit towards he end. 8000 grit at 1 micron has done well for me. They have .5 micron. I may try this eventually. I get a pretty nice shine. (If you can avoid the 120, I would. I wouldn't start with anything lower than 400 but preferably 800. Just go with the highest that you can get away with and still remove the material that needs removed.)

@IcsulX 4 года назад

w8, if you say these can break from catching on a micro mesh, how TF are you supposed to use them for rolling on a table... that is you know; hard =.=

@MichaelMakes 4 года назад

A sharp point getting caught in the weave of the fabric is a bit different than rolling on a table though.

@Katy-sp5cv 4 года назад

Probably an obvious answer but would it be possible to just use the knife rather than cutting it off with shears first

@MichaelMakes 4 года назад

The sprue would be a bit unwieldy and hard to get level, which is why I like the two separate cuts, but you could totally make it work if you wanted to!

@kabushi89 4 года назад

Can not find the video you mention in this video.

@MichaelMakes 4 года назад

It’s in the cards, the end screen, or just check the channel :)

@denniss8443 4 года назад

Do you sand each side of the die, or just the parts touching the nib?

@MichaelMakes 4 года назад

Just the ones affected by the sprue until the higher grits.

@denniss8443 4 года назад

@@MichaelMakes So when you get to the micromesh, then you start sanding the whole die?

@MichaelMakes 4 года назад

It depends on how things look. For sure on the polish, like I mentioned, but if a face seems dull it might get the last one or two micro mesh levels.

@denniss8443 4 года назад

@@MichaelMakes ty so much for the help

@LeonAllanDavis 3 года назад

How much is a millimeter in American? I don't understand French measurements.

@TheGame2K5 3 года назад

Do you mean the metric system that is used by the entire world outside of handful of countries?

@theao5798 4 года назад

I’ve been struggling with air bubbles in my molds. I let the resin sit in warm water to get rid of the bubbels. But when I use a pipet to get the resin in my molds, a lot of air gets in. Does anyone have any tips for this?

@MichaelMakes 4 года назад

Pressure casting helps a lot with this! The other thing is to make sure you don't have bubbles in then pipette before injecting into the mold.

@cartotech81 4 года назад

Check out spellcaster dice on Instagram. Makes great dice and no pressure pot.

@vampcaff 2 года назад

@@cartotech81 great dice, full of bubbles

@Cricket101382 4 года назад

This Blue Mimic guys prices are insane. To get a no support sanded and polished set of masters it will cost you around $500! What kind of BS pricing is that? NO WAY am I paying that much money for some custom dice.

@cartotech81 4 года назад

It's well worth the price. You can get masters from a lot of other places for cheaper but you will spend more time finishing them. You will also spend another $50 buying inhibit-x so you can make molds that won't react to these 3D prints.

@Cricket101382 4 года назад

@@cartotech81 Actually I went through DruidDice and payed less than half the price got amazing quality masters and customer service and have no need for inhibitx due to the type of silicone I use. So, once again Blue mimic is grossly over priced. I will say that I sanded and polished the masters myself and that he does offer to do the service for you but even if you pay for him to do that it's still cheaper than The Blue Mimic.

@brookehotchkiss3009 3 года назад

@@cartotech81 yeah blue mimic is definitely not worth the price

@lauren8336 Год назад

get yourself a little pottery wheel. it'll save your forearms

@MoshiMonsterCrazy 2 года назад

5:30

@tamihill1329 4 года назад

I did everything to the tee. My dice are still cloudy. I used the polish too... still cloudy... help!

@MichaelMakes 4 года назад

Could you post some pictures? What finish were your molds in when you made them?

@tamihill1329 4 года назад

@@MichaelMakes what do you mean, what finish were my molds in?

@tamihill1329 4 года назад

@@MichaelMakes I don't see where I can post any pics...

@1sinister80 3 года назад

you would have to charge 100 per set to make money back on your time.

@SamGGreenberg 2 года назад

So, we're just gonna use "a dice" now, huh? Like how "literally" now can mean "really"? It's not a big deal, but if a Dice Maker uses the word that way, the ship has sailed, right?

@Reploidx9 2 года назад

Depends who you speak to. I stick with a die. Some dice.