How to save energy at home - How to insulate your loft

Подписаться 208 тыс.

Просмотров 52 тыс.

50% 1

1 quarter of your home’s heat can be lost through the roof of your house if your loft isn’t insulated!
Follow Craig’s how to guide to get the job done! With tips on safety and understanding your loft space, it’s a much easier job than you think!
#diy #energyefficiency #heating
SUBSCRIBE:
/ @silverlinetoolstv
INSTAGRAM: / silverline_tools
TWITTER: / silverlinetools
FACEBOOK: / silverlineto. .
BUY THE TOOLS:
www.silverlinet...
Silverline Tools How To videos are for reference purposes only. Undertaking these projects is entirely at your own risk.
Read safety instructions before operating any power tools and always wear appropriate protection.

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@MinkieWinkle 9 месяцев назад

tip, if you need to split the rolls. do it before you take the outer plastic bag off, cut around the bag where the split is, grip the roll under your arm next to the factory split, then either grip the other half of the roll and bend, it will break, or give it a few hard taps with your free arm while griping with the other.. this way you never have to worry about is unravelling while splitting, and you wont come into contact with the fibres since the plastic is still on .

@SilverlineToolsTV 9 месяцев назад

Thanks for the tip!

@himheroutdoors757 Год назад

What about electrical cables that run in the loft space. Should they be under or on top of the insulation. Is this insulating material safe with electrical cables?

@joshuadench2055 11 месяцев назад

i have some fibreglass insulation in my loft. can i top it up with mineral wool OR do i need to replace it?

@mrdeafa25 11 месяцев назад

People have asked about a Vapour Barrier in the comments. Should there be one, where does it go and why havent you included one in this demo?

@DSS-Renzokuken Год назад

Once you place the 100mm, would it be better to use insulation boards like Celotex?

@nZebco Год назад

You forgot to menion paramount information. Vapor barrier inside the house and diffusion membrane on top of insulation in the loft, that way the migration of humidity in the insulation sistem is done correctly. Also, is the first time in 25 years of trade when I see someone cutting insulation with scissors..Nice video!

@sledgex9 9 месяцев назад

Why would you want to trap humidity inside the house and not let it breathe it out via the loft which is ventilated?

@nZebco 9 месяцев назад

@@sledgex9 Vapor barrier has been invented to control the humidity trapped inside and controled with ventilation then only the accidental humidity from the walls to be let migrate out. But all of this depends of the area of the building, too many factors too account for. New standard means mandatory barriers both sides.

@themightyatom1031 11 месяцев назад

Craig from Big Brother. Top man and vid

@MrDIYCraigPhillips 5 месяцев назад

Thanks

@LuckyFabian Год назад

ok so if two layers are laid down crossing each other as demonstrated above, how can I fit boarding on top of this???

@moralesruizefren8615 Год назад

You can’t. You would have to raise the framing on the certain area you would like to board and Insulate under that.

@shanekhan6895 Год назад

You can get raised feet for boards to sit on as you can't squash the insulation down as it won't do its job

@laurence9580 Год назад

loft legs and loftzone do products that can help. We have loft leg XL with 400mm insulation. Worth every penny! house is good and toasty now

@RH-nk7eo 9 месяцев назад

Seconded on the loft legs. Well worth doing

@arthurmartin804 15 дней назад

What about all the cables and ceiling light fittings?

@marylowrey8911 11 месяцев назад

What about flooring the loft? Can I board over the 3 inch stuff?

@steverathbone1954 10 месяцев назад

Hi You can purchase stand off's plastic and metal one's that you fix to the joists , place 4" and 8" insulation then the boards on top mainly for storage

@rss112 Год назад

great video, as i need to review my loft insulation this winter.

@baggiemad 9 месяцев назад

Can you please tell my why you need to use 100mm deep roll for the base layer and then 200 mm throughout. 200 mm looks cheaper to buy and obviously thicker and warmer?

@SilverlineToolsTV 9 месяцев назад

The joists in most attics are 100mm tall. So you fill those with the 100mm mineral wool and then lay the 200 on top so you don't have any gaps in your insulation.

@nickm2483 11 месяцев назад

Hi. I’m trying to insulate my loft currently (I moved in recently and there’s barely any insulation up there currently). Every video I’ve watched says you must NOT lay insulation over cables and wires. Instead the insulation should go down first, and then the wires/cables get gently laid down on top. My problem is the wires and cables in my loft are underneath the joists, it in some cases fed right through the middle of the joists via some holes that have been drilled. So there’s no way I can physically get the wires above the insulation. Does anyone have any advice?

@conradpratt1240 8 месяцев назад

If you have any new ones layed, make sure they go above. Just go with it. Keep that heat in

@krystian9603 8 месяцев назад

I bought my house 7 years ago. Unfortunately, whoever laid the insulation had covered the vents in the brick wall, so my loft is now very smelly😢

@SilverlineToolsTV 8 месяцев назад

🤦‍♂️

@Bo88y22 Год назад

To cut insulation down the predetermined lines cut using a sharp kitchen knife. Do not open the pack cut it whilst the packaging is intact. Many rolls of insulation have the llines marked for standard gaps in the rafters.

@SilverlineToolsTV Год назад

Great tip, thanks!

@HandymanBe Год назад

What we do with te moisture? Vapor barrier, where we put that?

@Wild-Storm Год назад

how do you insulate pitched roof with wool?

@thomasschafer7268 Месяц назад

😅😅 noch besser wäre es die Sparren zu dämmen. Und die Decke nur normal.

@moralesruizefren8615 Год назад

Man you made everything harder for yourself and made it harder for the homeowner to do. It’s way easier with precut batts. Buy a knife that is specifically for cutting insulation.