No video :(

HOW TO SAVE MONEY SKATEBOARDING!

Подписаться 246 тыс.

Просмотров 1,1 млн

50% 1

Subscribe or u push mongo ▶ urlzs.com/W1fju
A lot of skateboarding costs can't be avoided, but there are ways to save money on skateboards, trucks, wheels, bearings, and shoes. Not only that, but there are a few things you can do to prolong the life of your gear so you can really get the most out of it.
I've always been pretty frugal, and I try to carry my money saving habits over to skateboarding. These are a few tips on how to save money skateboarding.
Check out more videos!
How To Save Money Skateboarding!: • HOW TO SAVE MONEY SKAT...
Biggest Skatepark in the World: • 10 BIGGEST Skateparks ...
BEST Backyard Skateparks: • 12 BEST BACKYARD SKATE...
10 BEST Skate Shoes: • 10 BEST SKATEBOARDING ...
ICONIC Skate Spots That Got DESTROYED: • ICONIC Skate Spots Tha...
Rappers Who Skateboard: • Rappers Who Skateboard...
9 Things EVERY Skateboarder NEEDS: • 9 Things EVERY Skatebo...
Grab Some Gear!
FP Insoles: amzn.to/33LgHpH
Thrasher Hoodie: amzn.to/2KuJA1n
Ultimate Skate Tool: amzn.to/2W5fmsN
$18 Blank Deck: amzn.to/2LOlG3g
Deck Holder: amzn.to/2LPGY0x
Independent Trucks: amzn.to/3iN2Aqt
Portable Charger: amzn.to/320XiPH
Spare Parts Kit: amzn.to/2ICnDf7
Gulf Wax: amzn.to/322tG4f
Skateboard Backpack: amzn.to/2VqkAfr
Grip Gum: amzn.to/2SwnH4q
Wireless Speaker: amzn.to/35kEflr
Shoe Goo: amzn.to/33i6e3u
Phone Fisheye: amzn.to/2MuxNzt
Mid90s: amzn.to/2JOgkCo
Footage From:
Ride Channel - • Tony Hawk, Riley Hawk ...
Sergio Lucea - / serlua
CCS - / ccsskatemedia
Lowcard Mag- • Dalton Dern's "3 Chip"...
FTC Disclosure: I get paid if you use my links or discount codes to make a purchase (at no extra cost to you!)
#skateboarding

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,7 тыс.

@deadferret22 4 года назад

How to save money on skating: *Buy things on sale* Who would’ve thought?...

@sasproductions701 4 года назад

buy things on sale? do u know why there on sale? because there shit and wear down quick and nobody likes the style of them. if it was a shoe that lasted it would be high price. its not rocket science. nike solarcheck cheap as fuck £35 wow! cheap-o suede canvas crap. compared to the good quality suede. i had the es swift which were like £70 or more, then couple weeks later the price dropped and i noticed the bottom of the shoe wore down quick with the way i walk putting heel down first. ive got nike sb dunk highs truck it and they have not worn down on the bottom like them fuckers did. i seen a guy yesterday with new vans that have proper rubber round the front, after skating new board the white rubber was wearing away.

@memecer998 4 года назад

SAS Productions some items go on sale bc they are just making a new colorway or design for that item soon for example I got the tyshawns for $50 when I was gonna pay around $90 for it last week and they are hella good vans are also just really bad in general I bought the vans Chima pro for full price and it didn’t even last a week it’s really just a hit or miss also just check the reviews b4 you buy

@connorshaw-case6030 4 года назад

seriously most of his solutions were spend more money or buy more XD

@connorshaw-case6030 4 года назад

@@sasproductions701 also new stock takes up space old stock also tkes up space they need to move it cause its costing them money to just keep it around. thats why sales happen. you numpty

@crep2462 4 года назад

Smart ass alert

@deathhimself3496 4 года назад

Skate with no shoes and just take the injuries like a champ. Thats how u save money.

@ussephh2614 4 года назад

Respect.

@emilys878 4 года назад

lmao

@big_toz4602 4 года назад

Your skin will get thicker over time making your own shoes

@deathhimself3496 4 года назад

@@big_toz4602 exactly 👏

@jameshancock1528 4 года назад

it's like an old sticker for vans i saw once with bare feet all busted up that says NEED VANS

@wolfdudeman 4 года назад

How to save money while skateboarding: 1) Deck - Buy the generic team deck. 2) Trucks - Buy from a reputable company, but don't buy the signature model. 3) Wheels - Don't buy the signature model, buy the generic one. 4) Bearings - buy from a reputable company, but don't buy their most expensive model. 5) Shoes - buy the cheapest shoe you can find. They all rip the same way.

@christechguy 4 года назад

Haha that’s great mate totally true they all freakin rip.

@decc0484 4 года назад

suede is much better than canvas for the shoes tho

@chhgnh2901 4 года назад

Disagree on the bearings,in my opinion they're probably the most important part

@lennenlumbre1373 4 года назад

cheap suede shoes. suedes for life super durable

@lastnameawesome8982 4 года назад

Here in canada we have a chain mall store called payless shoes. They carried airwalks for the longest time for like 20$ a pair, they were perfect vulc suede skate shoes, looked sick and skated sick, and mind u here in canada a pair of vans would run us 70$+

@GOD-fg7rk 4 года назад

I’ve got a really good way to save money Have an overprotective mom as she doesn’t want to see her ‘DARLING ANGEL’ get hurt

@Solaxer 4 года назад

She might be having a hard time watching her baby boy grow up

@sammirakkar 4 года назад

Solaxer well as someone who has an overprotective parent, you have to let them do it otherwise they’ll just become scared of doing it

@aimeemichelle9323 4 года назад

Same

@user-wl9cr7db7r 4 года назад

my mom only protects me cus im a girl and my brother can break a bone and she wont make him stop skating but when i get a small bruse she made me stop for a while :(

@jamespineapple6313 4 года назад

Isabella Bernal S E X I S M

@Garetsuawesome 4 года назад

I would recommend mini logo for anyone that's broke. It's rly cheap but good quality because it's the same brand that makes bones

@landoncallahan5040 4 года назад

Thank you someone else knows this

@driftinghighenough6429 4 года назад

Skateone make Powell Bones and mini logo

@ArlingtonAnariba 4 года назад

Snapped them on flat ground kickflips but they have amazing pop, shape, and concave id give them a 7.5 imo 🤷‍♂️

@micahellsworth 4 года назад

Wheels for 20 bucks, might not have graphics but that's a steal

@Bankrigged_ 4 года назад

Im currently rocking these and they holding in great.

@Bonkatronicks 4 года назад

I've been skating crocs for a year and a half and still dont have any holes

@Controgs 4 года назад

Genius

@GhostOfBrown 4 года назад

Lmaooo

@fabiopicasso5477 4 года назад

lol

@ussephh2614 4 года назад

Modern day problems need Modern day solutions.

@zhongenneo2093 4 года назад

Where can I get them😂

@jucha6662 4 года назад

Find a skater with same shoe size who is skating reversly from you and when you both destroy your “flick” shoe you just swap them 😄

@yelanabenade1407 4 года назад

Tahts actually so smart

@nathandust 4 года назад

Fucking Genius

@amina..22 4 года назад

OMG IM GETTING MY BESTIE TO TO THIS THATS ACTUALLY LIKE SO SMART

@OxySyrup 4 года назад

are you god

@madeehaislam1821 4 года назад

i just spent 10 minutes tryna figure how that would work , this is what quarintine has done to me

@sebbepedersen6013 4 года назад

If money is tight try buying blank boards. They are pretty good and they tend to last long. Just don’t buy like a Walmart brand

@katertelevised 4 года назад

If you buy blank boards a lot, the skate community will fall apart. Buying a board with a pro graphic supports the pros to keep pumping out sick parts...

@lucaford2685 4 года назад

@@katertelevised not everyone has that money though you have to understand

@Nlitend2 4 года назад

@lucaGC yea u r right

@zhongenneo2093 4 года назад

Can spray paint revive on the deck just hope no one realizes the difference

@josephdavis1583 4 года назад

That, or skate shop brand decks

@santiagoomegna1652 4 года назад

If u have been in a music class at any point and played an instrument, the oil that comes for cleaning the instrument can be used as bearing loob

@basicallyblazed3105 4 года назад

Santiago Omegna 🙏🙏🙏

@Mateo-se3hu 4 года назад

haha the word loob is fun to say

@thomasrj7390 4 года назад

except piano...

@thomasrj7390 4 года назад

and guitar??

@kalenissen9164 4 года назад

It’s lube

@spacetaco3125 4 года назад

Look around you thrift stores... I find skate shoes all the time that haven't been skated. Clean the them first obviously. I usually find lots of vans and Nikes. Some NB and adidas. Cheap af too. Found some superstars for 10 bucks a week before the whole corona shit happened.

@nehemiahzo_ 4 года назад

Isai Saucedo I found a wicked good board that I still skate at a thrift shop

@shelyqua2747 4 года назад

frr i found some suede vans and stuck some my old buesenitz insoles in them skate great amd were $10 as well

@adammarcin8407 4 года назад

25 dollars at my local thrift store for pretty much new Nike SBs that were only missing a small part of stitching

@ahh7795 4 года назад

U have blessed me with your knowledge, thx u 🙏🙏❤️

@campkira 4 года назад

easy just not skat....

@salsapicante 4 года назад

I remember what I did to save money on shoes back in the 90's was an ollie pad. It was basically a piece of leather you would add to the shoe that would do all the kicking movements. The companies that sold these pads were pricey, but if you went to goodwill or somewhere you can get fabrics, you could just cut your own out and put it on the shoe. It made my shoes last a very long time.

@IBangarang 4 года назад

Mini-Logo wheels and deck, Red's bearings, trucks with a life-long guarantee like indi's, venture, thunder. I think they'll give u the most out of ur money.

@rosscallahan8108 4 года назад

6:00 this is perfect I’ve looked at this for 5 hours now

@impostersus7804 4 года назад

I see you’re a man of culture too

@deisychocon7032 4 года назад

I’ve literally been watching it over and over too lol

@leahmcdaniel1692 4 года назад

Glad we are on the same page

@Towelie42O 4 года назад

I do this with all my *trashed out* vans😂 especially growing up and skateboarding🤣🤝🏻

@jackdonovan9263 4 года назад

Ask if they have any used or broken boards. Just got 8 boards for free

@davyjones2994 4 года назад

I asked my local shop to keep old bearing, they kept a jar of them and I got a lot of Reds that needed to be cleaned

@parkerrollins774 4 года назад

Y’all are like homeless people

@danielf6585 4 года назад

Parker Rollins who doesn’t like free boards

@9thsense79 4 года назад

@@parkerrollins774 one man's trash is another man's treasure

@jackdonovan9263 4 года назад

Parker Rollins i used em to make a diy chair

@scooby45247 4 года назад

UNLESS YOURE SPONSORED THIS IS MY GUIDE TO A BUDGET: DOs: buy from local skateshop cuz they are more likely to give you a deal buy blank skateboards making sure the nose and tail are as close to interchangeable as possible so you can switch when one gets worn buy shoes with rubber guards; as many guards as possible because shoes are going to get torn up and you want more there to stop that as much as possible (shoe goo use can replace that guard too) buy GOOD bearings because they dont last regardless; water, angry slamming, and use will kill them BUT keep them lubed (recommend lube made for small bearings) buy independent trucks until youre sponsored (can grind for eternity plus theyre heavy so they help to strengthen muscles thus height on other trucks); use other trucks @ competitions unless sponsored.. buy bigger wheels so they last ( i recommend spitfire classics); i personally love the dual design sides and shape which is important cuz you need to rotate the wheels every so often (inside becomes outside) buy generic grip tape because name brands are pricey and unneeded.. buy generic hardware because name brand is pricey and unneeded.. DONTs: dont pay for a skatepark membership; the world is your playground dont buy clothing.. only wear it if they pay you.. go to a goodwill.. dont listen to sponsors tell you what tricks you should do ( it cost me my knee and i can no longer skateboard ) hope this helps you and happy skating..

@mr.flawless4781 4 года назад

Thanks Helps a lot now i skate naked cause of u i get a lot of attention i wonder why...

@sangasa6721 4 года назад

Feel bad for your knee

@scooby45247 4 года назад

@@mr.flawless4781 lmao.. I guess I could clarify that part but after your reply I'm not..

@scooby45247 4 года назад

@@sangasa6721 yea, it sucks not having coverage to fix it.. i miss playing skate with my friends most of all.. having a handrail become a playground for hours on end..

@mikebernhardt92 4 года назад

Man your just mad because you’re old and busted

@stinkytoes5374 4 года назад

if anyone goes through lots of shoes I recommend vans authentic pros I lost my pair but I was skating them for a couple months and no holes also they are very comfortable

@PHeMoX 4 года назад

I've skated Vans Sk8-Hi Pros and Vans 112 Pros and honestly was not at all impressed with the durability. Especially the Sk8-Hi Pro had major damage within three days. I'd recommend any of the Es cupsole shoes, like the Es Swift 1.5 or the Es Accel OGs. _Definitely_ amongst the most durable out there. Oh and Shoe Goo is a good idea for any shoe.

@MrTaitanz 4 года назад

Last pros I had lasted me like 3-4 weeks before completely shredding them and not just on the top, but the sole too hah But that's okay because they were COMFY as frickin frick

@MrTaitanz 4 года назад

@@PHeMoX yeah, everyone has their good lasting brand, for me that's DC, they do last long, while some think they are ugly, I love them, I've been using DC shoes since like 2007-8

@PHeMoX 4 года назад

@@MrTaitanz Well, it really is not a brand thing. I have already skated Emerica, Vans, Es, Decathlon Oxelo, Etnies shoes and probably will try out some more eventually. None of the Vans were durable. As in, at all, despite being Pros and meant for skating. In comparison the Emerica ones were better, but I'm not sure I liked skating them. Comfortable, but not very precise with skating. Etnies was fine, but didn't fit great. Es is super comfortable and a puffy shoe and I really do like that. Also, easily the most durable shoe I had so far. Ironically, the Decathlon Oxelo Crush 500 I had are amongst the most durable shoes I owned too, as less than $40. I will have to try DC sometime, but probably will get some Swift 1.5 Es shoes next. edit: Forgot I also tried Converse shoes, those were overall pretty similar to Vans, but I had canvas shoes and those just destroyed themselves way too quickly. The rubber-suede type ones probably last way longer, but haven't skated those yet. Oh and I did not like the insoles. Vans UltraCush HD is like a million times better, even when still not perfect.

@MrTaitanz 4 года назад

@@PHeMoX man I have to be honest, I've never had a pair of Emerica or Oxelo shoes so I couldn't tell. But that's a good experience since the first and last time I had some Es shoes was more than 10 years ago, as I've said I honestly been faithful to DC hah, a couple of Vans, Airwalk back in the day, Volcom, Nike sb, Adidas, I tried Supra once (never again they are real comfortable buy they suck for skating, first session in and they already had holes, I don't know if that's particular to the model tho), but yeah, DC has been good for me and I've grown used to them, you know, them bulky ass shoes

@tuurmeloen4611 4 года назад

When buying your first board it’s definitely important to do proper research before buying it. When I bought my first board my pop was like gone in a week. So don’t only go for a nice print, also make sure your board is from good quality.

@scrubby1621 4 года назад

My board is made from 100% maple tree

@WaechterDerNacht 4 года назад

In terms of bearings: Dont under/overtight them. Bearings are made for a given preload that makes the bearing rotate smoothly. Also takethem out, clean them and regreasr them with a drop or two of oil (no, not salad oil).

@shira7055 4 года назад

for skate shoes if u wear vans go to an outlet bc vans at the outlets will be like $20 and they have a sale wall and u can find sum really good ones, same for clothes and other stuff. also at the outlets they have hella stores its like a outside mall and you can get real name brand stuff for good prices also sum have designer stores depending on where u live

@theonesheep 4 года назад

Big facts! I went to Nordstrom rack and got a pair of vans and Adidas for less than 40 bucks

@shira7055 4 года назад

Berenice Martinez yeah also thrifting is good and places like ross etc

@jassonbender 2 года назад

Lmfao very rarely does vans outlet have vans for 20 bucks this isnt the 90s

@AwkwardHypernerd413 4 года назад

Simple solution: thrifted board and throw in some bones reds. Managed to find some decent decks doing this. Another pro tip: fidget spinner bearings. I had a shit load of those after 2017 and I’d just throw those in when it came to getting bearings. So don’t throw those away as they can still be useful

@ethannguyen711 4 года назад

2:00 What I *subscribed* for

@kidmisha6969 4 года назад

foreal i just subscribed and saw your comment hahaahha

@boring_cringename 4 года назад

6:00 is what I subscribed for

@mykenzieforbes5125 4 года назад

I just got my first deck(a death wish complete), soft wheels, and protective gear (helmet+Kneepads+wrist guard) for just over 110 dollars. The workers there truly engaged in conversation and asked about it. They found out I was new and my dad(who was with me) knew about sports like skating. They walked me through the process and what to look for in the future.

@hecticbeatzz5628 4 года назад

Where man. I just spent $100 on a baker complete which I had previously heard that the baker brand is great, but if I knew I could have paid 10 dollars more for extra soft wheels and protective gear I would have :/

@gomugomunokienzan 4 года назад

One of the best ways to save money would be purchasing a blank deck. Blank decks are usually $20-$30, much cheaper than decks that has graphics. Boards chip/snap eventually so I usually just use blank decks. For trucks I’d say stick to thunders or independents, usually they cost about $40-$50. Wheels it’s probably good to invest a little money for since cheap wheels get flat spots much sooner. Probably good to stick to bones STF usually they cost about $30. For bearings I’d say the most affordable ones with good quality would be bones reds ABEC7. Those bearings are $15, very cheap! And they’ll get the job done. For shoes it’s good to go to Ross and TJ maxx. I usually find a pair of Nike SB for $15-$20. Sometimes a pair of DCs for the same price too if I get lucky. Skate shoes rip over period of time anyways 🤷🏽‍♂️. If you wanna save though or not spend too much money you can’t be picky but I know that we have personal preference.

@seanjones4726 4 года назад

Speaking of saving your shoes, that rubber grip tape stuff is pretty tight. I can for sure tell the difference between sandpaper and the rubber compound, but it took about half an hour to get used to and after that it feels solid. I saw a bunch of skate youtubers saying it would only be good for kids, but its good for cheapskates too. Just don't step in a puddle or you're screwed.

@jesussuarez1156 4 года назад

you can also get non-abrasive griptape to save your shoes or you can also use duct tape to cover the holes in your shoes.

@weedi2447 4 года назад

its not worth to buy non abrasive griptape if you can get griptape with your deck for free and duct tape is worst choise to use to cover holes (much better is hot glue or shoe goo)

@mRSasha-dv3mb 4 года назад

I had some ducktape on my Adidas and it made them last longer than my laces by like 3 sets

@darkzap8552 4 года назад

Or shoe goo

@trevdieu9535 4 года назад

I use super glue

@JPfingerskater 4 года назад

@@weedi2447 been using non-abrasive for almost 2 years. Have only had to buy two pairs of shoes. Can't even imagine going back to sandpaper

@Threeflip 4 года назад

I also use ShoeGo BEFORE i start to break in my new shoes.

@royalflush5ts 4 года назад

I like to skate my new shoes a couple days and seein where they take the most damge myself

@Threeflip 4 года назад

Tom Hoodie That's right, it's even better. I am wearing the Globe Empire for the third time. I did it for the first time. After that its always the same with the following shoes.

@PHeMoX 4 года назад

Yeah, there's no point in gluing the shoes when there's already a hole. Especially the harder shoe goo stuff or super glue trick will allow you to get a strong surface that can be skated pretty long before it is gone. It's cheaper to buy some new glue than buying new shoes, so be smart. Just add glue on day one. The nose, kickflip spot and ollie spot will wear most. Maybe add glue to the heelflip spot too. But ideally those spots should be pretty much the same for any shoe. Oh and maybe put some glue around the lowest lace holes, it'll prevent ripping laces early.

@KabraKadabraa 4 года назад

Deadass, my Heelys are my favorite shoes for skating.

@shehatesmigi4029 4 года назад

I work as a delivery boy and whenever i get tips i just put it aside so if i need a replacement on something i can use that money so working in quarantine i get like 5 bucks tips a lot so i bought new shoes and a deck with those tips

@chrisu-_- 4 года назад

Sometimes it's better to just replace your grip and skate the same board rather than buy a new one if its still in good shape.

@angelaluo748 4 года назад

chrisu usually the board is gonna wear out way faster than the grip

@jacobtrimble9661 4 года назад

Angela Luo true true

@jacobtrimble9661 4 года назад

Angela Luo or if you grip it properly

@chrisu-_- 4 года назад

@@angelaluo748 Yeah I usually snap boards quite often but I think it would be best for beginners

@qoapaoop-1958 4 года назад

I usually put tape on the front of my shoes (usually the foot that I use to ollie and do tricks)they make the shoe last longer

@kat3691 3 года назад

U are a genius

@noyd9849 4 года назад

i keep my old skate shoes and cut out patches of suede to cover up the holes. also glue/ tape your laces to prevent ripping.

@DengueFeverJoint 4 года назад

1. Bearings If you need to replace one or two bearings, you dont need to buy one set of bearing. Just go to the hardware store or machinery shop and ask 608 size. Its more cheaper than buy a whole set. Clean the grease with oil remover 2. Shoes Use glue gun on ollie area. It might lil bit messy but more you skate, more smooth the area would be

@briannicholson390 4 года назад

I always try to not worry about which end is the front of my board and sometimes flip it around on purpose to avoid getting a razor tail as fast, and to distribute the wear

@ltpdogtrainingNJ 7 месяцев назад

Great idea! 🛹 Thx! 👍

@jucha6662 4 года назад

I would recommend buying decs etc. with a friend so you dont have to buy more at the time when you cant afford it and stil can get the mentioned discount

@ayooo5646 2 года назад

I have a good tip for your shoes. I skate my older vans and as i first tryed to do tricks i noticed that they got holes. I simply cut off a piece of an old belt and glued a stripe along on the right shoe so now as i skate the leather of the beld gets sanded down and as it is sanded down i just glue another layer on it and it is as good as new. If you do it right it won’t even look bad. My sole is not sanded down but you can also use a piece of an old bycicle wheel and glue it on it and can add another layer if its worn down.

@ayooo5646 2 года назад

If i want my shoes to look good i just carry my old vans in my backpack while travel with the bus and change them at the park.

@antoniomarulli2078 4 года назад

if you are a beginner, follow the tips in this video and the comment section.BUT most important build a legacy with your local skateshop and the guys at the skatepark.DON'T buy on internet, sometimes you can find a good price, but in the long run, it's much better the shop for many reasons, for example, I buy to the same shop for 20 years(I'm 32), and they help me a lot through the time, and also they help the senior's skater to build the skatepark and made events. the guys at the skatepark always have old parts that they can give you for free or for cheap, I also recommend, when you change your set up you can recycle the nuts, bolt and the bearings, when you grip your deck save the remaining grip, after 4\5 times you have enough grip for a deck, another tip it's to buy at least 2 times the same type of trucks, you can recycle the baseplate, bushing, and the kingpins. if you don't have money for a new pair of trucks and the kingpins touch, when you grind, use a hose for filing it. I hope that this comment can help somebody.

@statiksunny 4 года назад

tysm

@Maroual_odorant 4 года назад

For beginners, I recommend oxelo. It's a cheap brand with pretty decent stuff. On the last few years they've been improving the quality of their boards (they sell'em full like board trucks and all). But I think their shoes are like the best part. I bought a pair 3 years ago and it broke recently (when I mean broke there's hole on every possible part of it). So yeah quite good , they do sales too

@tillytiger5041 4 года назад

him :a board is usually 30-50 bucks me: cries in dancing longboarding

@aaronpinot8543 3 года назад

Atleast you guys don’t have to buy a deck every 3 months

@zhongenneo2093 4 года назад

U can adjust length of ur shoelaces before one part tears so u can have more parts of ur laces to tear instead of just one part(it just prolongs the lifespan of ur shoelaces)

@Alex_Colburn_Guitar 4 года назад

I got some vans shoes and did some Ollies and they got beat up but I got sketchers and they still haven’t ripped and I’ve been using them for a couple weeks

@Alex_Colburn_Guitar 3 года назад

@Mashayla no they are basically destroyed.

@charlesdevera850 4 года назад

I skated my authentic and i do a D.I.Y with my shoes i removed the old insole and i replace it to my old ultra cush and it works. And i do my ollie and 180's hole to a suade patch i made and patch it up

@icepoemix8820 4 года назад

Im goofy, so I ask my regular friends to give me their old broken shoes... As they are regular the right shoe will be almost intact and I can use my left shoes as those are almost intact

@jassonbender 2 года назад

Problem woth that is shoes wear to the feet of the person wearing em so they wont fit correctly

@trevormcnabb868 4 года назад

A lot of skate shops have their own brand of boards wheels and sometimes trucks and bearings. And they're cheaper than brand names companies. Amazon sells blank boards

@Tomattoism 4 года назад

Sorry, but it's like each of his sentence ends with a question mark. Good tips btw.

@JOOLVAUR 4 года назад

Not really

@hauntedburgerplant 4 года назад

He's also yelling.

@liamschannel6294 4 года назад

Bones reds have always been my bearings if choice

@makeitpunk6716 4 года назад

A small dab of "amazing goop" , or "shoe goo" on those canvas shoes(thumbnail) in the Oliie pad area ,BEFORE you even put them on your feet and the canvas will out last the soles making them EXCELLENT bang for the buck..

@sroguthrie4438 4 года назад

Wish i knew this before my shoes got destroyed 3 days after buying them

@prod.scxrrified869 3 года назад

omg bro same i literally destroyed my converse in just 2 days

@lovaboy0076 2 года назад

The skateboard I ordered just came in today, I can’t even imagine throwing it around, it’s like my baby

@_Maxten 4 года назад

i do this thing where i sand down the tail when it gets too razored. or since i dont do a lot of nollies i'll use the nose as my tail if i'm doing a scoopy trick like an impossible. they say get bigger wheels to last long but i just continue to skate em when they're tiny and use risers.

@syrupthegamer1015 4 года назад

I’m currently rocking a greenblue water paint blind deck with black neon yellow thunder team trucks, with Ricita jell wheels. And I have a spare deck, half graffic enjoi deck

@officialporni3572 4 года назад

Also, if u feel really mad, you can turn your board on the other side and then step on it,cuz if the griptape is facing you and u step on your board with a lot of force when you're mad you're gonna break it, and by turning it on the other side it prevents it from snapping

@adamalfaisal5430 4 года назад

this made me realize that my washers have always been on the wrong side of the wheel

@TheEloquentEye 4 года назад

3:16 - Do not buy these vans for skateboarding. I guarantee that those vans shown in the video were like that after 3 kick flips

@Michael-Hammerschmidt 3 года назад

My best tip for saving money: Non-abrasive grip tape. Will save you literally hundreds on shoes over the course of a year. Just be sure to cut the grip tape more than you would normal grip tape to prevent edge tearing.

@maxfb6169 4 года назад

In France, baker boards are really expensive, they are 80€ without grip.

@thearianmandalorian Год назад

dude trust me, prices have indeed come down since the 90s! and not just a little bit, and way more products now then ever before. Tons of options out there!

@baggybandtshirt 4 года назад

Buy a few skate shoes from the thrift stores as backup shoes: they’re super cheap and are already broken in

@ramen423 4 года назад

"Local shop" bro my local skate shop is Walmart

@minhj0 4 года назад

i love that skate shop

@mj6326 4 года назад

okay if you’re from the uk... primark shoes. honestly the ones that look like vans are amazing quality and so easy to skate in

@Jack-xy4fy 4 года назад

Mini logo bearings, mini logo wheels (C cuts), tensor alloy trucks, bulk buy blank decks. Suede skateshoes - skate them for a day to check out your wear spots, then put some gorilla tape on those spots, it'll keep them alive a lot longer. Get a pair of footprint painkiller socks, cut out the shin pad, throw away the sock and just slide the pad into whatever socks you are wearing .👍

@hotstudiosyoutube1805 4 года назад

Have separate life shoes vs skateshoes , buy “pro” vans

@sgtvideogames4061 4 года назад

I'm disappointed that he didn't mention non abrasive griptape 😭

@thelifeofdan1516 3 года назад

Hey guys not a pro skater but I definitely have tips for you that are not mentioned. 1: buy second hand shoes they don’t need to be skater shoes, a tennis shoe or just a flat bottom shoe that is not made of a net like material is good enough. 2: if possible buy the best trucks you can find or afford. I got my ventures trucks for almost a 100$ and they last already for two and a half years. 3: you don’t need your deck to be like a pro skater brand, get a deck without a print they tend to be cheaper. I know a deck without a print is kind of boring, but you can customise it yourself, and make it look more interesting. That’s it I hope it helps you and please enjoy skating and have fun!

@XEN-ZOMBIE 2 года назад

No idea who started the old lady lawn bowling shoe craze but I never stopped buying purpose built shoes for skating. Chunkier the better.

@lor-b5887 4 года назад

3:00 That looks sick 😲 Do you know the name of the video ???

@matyassulyi9520 4 года назад

Thats nyjah, just look up some of his older parts, it's gonna be there somewhere

@lndn787 4 года назад

I literally just bought the shoes in the thumbnail literally my face rn 😐

@stefansneck5778 3 года назад

i haven’t been skating long, only about a month, but in my experience my nike killshots have lasted me the entire time, while i got multiple holes in my vans the first day.

@stefansneck5778 3 года назад

also a good clothing brand for skating in warmer places in my opinion is gymshark. The shirts are well made and not too expensive and are very comfortable to skate in.

@nael_tm 2 года назад

Selling parts from your old skateboard when you buy a new one is a great idea. Mine was run over by a bus, but one of the hangers, the wheels and the bearings survived lol.

@matthewbannister8677 4 года назад

I picked up a pair of nyjahs on sale for £40. I understand that they are a new style for skate shoes but they only lasted 3 weeks before busting 🤨🤨

@matthewbannister8677 4 года назад

Good to know bro👍👍. I am actually struggling with my kickflip at the moment. I am basically landing on the board but 1 foot always falls off

@juli_ju172 4 года назад

@Miami thats not always the case

@carlyle6071 4 года назад

I highly recommend going to your local Marshall’s, Burlington’s, Ross, etc. It is very common to find discounted skate shoes.

@methev662 2 года назад

When he said most skaters had jobs, it reminded me of the time I saw a Walmart worker going home. He just dropped his board and went down to the sidewalk.

@fr5655 4 года назад

Tips that works for me - buy skate shoes at a outlet or go to goodwill or a thrift store -buy a skate deck off offer up or letgo

@jakubsindelar8532 4 года назад

Skater: "my board is worth 150$" Me, a bmx rider: "hold my beer"

@daddy._._.nathan 4 года назад

Every bmx rider is just a failed skateboarder

@Michael-om8br 3 года назад

@@daddy._._.nathan facts

@Mjvvll 4 года назад

Just buy some shoes that are resistant to the grip tape. I wear vans when I skate but any shoe that is resistant is fine. Don’t spend lots of money on stuff, go to thrift stores or cheap stores.

@stupidskaterboy3215 3 года назад

one way u can save on skating is when u get a new board if u can i would suggest reusing ur old trucks if they are still in pretty ok shape

@TheRealJibbeyman 4 года назад

Use proper form at all times to prevent damages to the board and avoid injury

@StrawHatJason 4 года назад

Try to get some shoes at outlet stores like Marshall’s and Burlington etc I bought some grey janoskis for 30 dollars

@Bankrigged_ 4 года назад

Facts

@reup4023 4 года назад

add to that Ross

@GrimeLab 4 года назад

I got a pair of Jordan 1's for $40 this way and now I need a new pair I cant stomach paying over $100 for shoes I am about to rip up again

@Incinite 4 года назад

Damm didn’t realize that this video was uploaded an a hour ago lol

@-2high2fly- 6 месяцев назад

The prices may not have went down in 30 years but they also have not went up in about that long as well. It has been extremely consistent making it easy for skaters to know what to expect when buying gear. Prices aren't really that outrageous anyways. Maybe for like a 6-13 year old coming up hard but if you got a job you should be able to afford skate gear.

@snipersmask4249 3 года назад

this one guy helped me out with my kingpin nut bc I lost it riding, and instead of buying a $24 dollar kit that had like one thing I really only needed it there, he told me to go to my nearest hardware store and find a nut that fits your kingpin. okay that's it thank u for coming to my ted talk c:💙

@morgano5345 4 года назад

Yes finally first!!!

@werewolfgenius8984 4 года назад

How did you comment 9 minutes before the video was released

@jonathanloos7973 4 года назад

Why dont they make plastic sleeves for your trucks so you dont grind through them like with BMX pegs

@jacoblong644 4 года назад

The old heads did that years ago. I think the organic sounds of the coping on pools getting shredded is what made most people ditch em

@reup4023 4 года назад

They're called truck copers, and they're out there if you look. Skeleton Key is one...

@insanogeddon Год назад

Basic but SOLID advice. Great often overlooked topic.

@CarlosGutierrez-ox7gt 4 года назад

Tip for all purchases (excluding cars/ houses/etc) if you can’t buy three of it at a time you can’t afford it. Also buying shoes off the clearance/sale rack

@BrendaxJacobo 3 года назад

“ a lot of them are still in school and don’t even have jobs yet “ *me who’s in fifth grade* *yes*

@v1xionace965 3 года назад

Just take your mom’s credit card

@victorarregnelle8976 4 года назад

For my shoes I'm currently using suede patches from stick and flick. I can cover the holes in my shoes and keep skating. It was 6.99 for 3 patches. Free shipping. There is other brands too. Just happened to try that one.

@brooke4608 4 года назад

Some girl in my town sold TWO longboards AND a penny board all for $100 so my sister and I split the money and bought them all. It was totally worth it. Now I have a skateboard and all those other boards to work with!

@brandonskatesalot3296 4 года назад

yeah that’s cool but where’s yours skating? i see all these things about skating but i don’t see you

@rusky_nail4423 4 года назад

steal the boards and shoes at skatepark so 0 dollars for everthing

@kdawson020279 4 года назад

Wheels that are concentric are functionally identical at the same durometer hardness and composition. Quality blank decks are where it’s at - make sure that they are quality Canadian maple decks and not Russian or Northern maple. Bearing ABEC numbers don’t really matter as long as they’re at least a 1 until you need high quality and while some company called themselves ABEC 11 to be jerks there is no ABEC number higher than 9. It is also only a measure of precision and not speed. My old skateboards (1980s and early 90s) were audible like cheap roller skates. Use Gulf wax from the supermarket and not expensive shaped waxes. And, remember that with hard goods there is less profit than the shirts and stuff so your luck on bargaining may depend on whether you buy your street wear there as well. Your local skate shop has to pay for the overhead of brick and mortar so don’t expect them to beat the prices at online only retailers.

@sevanity9210 4 года назад

I highly recommend buying from the German brand "Titus" they are focused on being slightly cheaper but still being able to keep up with the high end stuff. Been using *The 5.25 Hollow Trucks* 24,99€ - 29,99€ and *The Classic Wheels* (101A) 19,99€ for over a year now still haven't met good old flatspots yet.

@sethwalker1452 3 года назад

Little thing for newer skaters like me if u dont skate in water or anything like that u can keep a bored for a while and if u can only ollie and maybe kickflip ur shoes will last a lot longer

@gregmoore2073 20 дней назад

a lot of skate shops will have a bin full of used decks for free... you might not find the best decks in them, but you never have to go without regardless of being broke.

@carsonmomplaisir4776 10 месяцев назад

I love to get Vans from thrift stores for $8-$15. You’ll never feel bad about ruining those shoes

@melody_sux2322 3 года назад

shoe goo i’ve been skating my shoes for 6 months

@gabrielklinefelter1444 Год назад

Seeing the bowling ball hit the brick and not break it was pretty cool

@ConsistedHD 2 года назад

skate stuff is really much cheaper in the US than here in Norway. Decks usually start on 80$ alone, a new custom complete without the most expensive trucks and bearings will leave you at about 300$ with discount. Shoes are usually from 90$ and up aswell. Insanely expensive to skate here, i usually just ducttape my shoes when they rip and skate with them till its no longer possible to get grip because of the tape lol

@fantomul6096 11 месяцев назад

I know this was 3 years ago, but recently I started being a filmer for a guy that is now my friend, and he hooked me up with a board for free cuz he gets a lot of discounts being a popular skater

@doomsdayclicker8161 2 года назад

Dude in my country skateboards are so expensive, i mean good decks at least 500 and wheels 300-500 ,so in my country inflation is very hi gh and thanks for your advices,its really help(sorry for my bad English)