How To Scrap Incinerated IC Chips For Gold Wires With A Shaker Table, Recycling Electronics MBMM 

I could watch this video over and over.....

Such a delicate balance between the three factors of water flow, table slope and vibration. Great to see a system like this that doesn't require chemicals! Very cool idea. I've seen similar (much larger) tables in gold mill videos on youtube. I like that this is a portable system and probably very easy to set up. I wonder if it is possible to use an even smaller table with perhaps a different vibration rate.

nice design on the table, I like the fact that it's not noisy... and there's nothing like that Yeller gold.

Amazingly clever process. Seems strange, but it's genius to recover these sorts of metals from waste computer components. Keep up the good work!

Like that smooth action:nice table!

Very well done and informative! Great video!

Wow thank you for the quick answer

im doing scraping as well and collecting ic chips and other stuff ill gona cruch and hand pan ;) nice video ;)

after playing with harsh chems and getting little results I'm certain if I was to pursue this venture this would be the way I would go simply because its cool af and the results are amazing the money I have wasted so far on lab stuff and chems wouldve been at least a good size down payment (not saying you take payments) on this superb unit thanks

i watch this over and over and over

Great Video!

can that be silver that's flowing down the lower grooves?

Were do you buy the rubber matting for the shaker table?

Hi, would this work with ground ceramic CPUs? Thanks

I’m filling up a 5 gallon bucket full of 100 mesh I see chips I’ve been working on for a long time now. What was your yield from this run?

very impressive

I love this video. and we do this every time we have IC chips. The Mount baker mining equipment we have is the most useful and versatile equipment in our shop.

great video sir

Great video, would a blue bowl achieve similar results given the same gold bearing material? Thanks

That is awesome

So would the next step be to smelt the #1 and #2 into a cone mold and then cupel it from there to get most, if not all, the gold from this process?

What you do with that ultra-fine dust, which is rubbish?

What caused the craters or pock marks in that gold pan?

Did you simpliy incinerate circuit boards then used the sluice ?

Where can I get a small shaker table like this please? I live in the uk

the black is a ceramic, almost as heavy as the gold, would love to see a filtration or something to separate the 2

beautiful!

Hi love the video do you sell this model of table

Awesome process I need to make a shaker table like yours to process the boards I have been colleting for h past few years. This is much faster than picking them apart to separate each metal. Would you have plans for this small table, I will try to make one either way. Thanks and keep the videos coming! Jeff

Hello guys can you tell me what kind of soap did you used in the mix of the concentrate

I wonder how much is copper

the high density black material you couldn't pan out is probable tungsten platinum palladium or iridium.

Хороший концентрационный стол!

As a matter of curiosity, what was the jet dry for? Breaking surface tension?

A lot of scrap metal dealers use electromagnetic separation processes. Does gold separate out with electromagnetic frequencies set correctly?

Hello Dear, Could you please explain to me, what for you are adding washing up liquid to the incinerated ash of the chips before pouring ash into the shaker??? I've seen many people do that on youtube, I don't understand why, this could prevent recovery of any escaped gold went past the table...

You make it seem too easy. I want one!!!

This video is awesome and would you please send me some information on cost and where your located...thabks

I live in Australia and do enjoy watching your videos. Where can I buy the small shaker table and how much is it. Thanks

How much does a table like that cost?

have you heard anything yet about recovery from this? and how much did you start out with pound wise with this

Had a thought while on the road today. What would your system do with TV screens and computer monitors? I guess the hammer mill would pulverize the glass and lead, what would happen on the table? Would the lead and other metals separate out like the gold, etc.? I'm not really sure of the hazards involved with this procedure. If it could work you would become a very prosperous person. What do you think? I enjoyed watching several videos, enjoyed them!!! Moose led me to them. I am disappointed that the lower grade boards didn't produce more gold. When you twink your table could there be more?

How much does a table like that cost.?

I asked a few weeks ago if just the rubber pad was available and was told no. My question this time around is: how much for a unit?

Very cool....where does one get one of these tables? Thanks.

The black you are seeing is mostly carbon. IC chips use fine elemental carbon in the epoxy mix. You likely have copper, silver, aluminium and iron in the mix with the gold, possibly some palladium and rarely platinum as well. As for the shiny silver bits, that's likely silicon from crushed wafers, they often contain precious metals but only in tiny amounts and chemical separation would be needed. After incinerating chips I gently crush and sieve out the whole silicon chips before reducing the ash to a finer mesh. Once I have several kilos of just the silicon wafers then I'll process them together, I haven't even got close to that yet as they're so small and light. Do you have any data as to the yield from 20lbs you ran?

Are u selling this mini shaker table ?

Excelente

Now how can i get ahold of you?? i wanna know more about this because i have alot of boards and pins and chips that i wanna get processed

Where did you send to get the assay?

did that machine work for ore rock gold ?

I like this table a lot. I have several hundred pounds of CPU and GPU that I need to process.

I've got just over 140kg's of powdered IC's+MLCC's. Would you recommend this as a way to clean it out?

how much do you charge to do this? or what is your cut i guess i should say percentage i mean of gold recovered? or how do you make one of these tables or buy one?

Awesome! I want to work with you)

you can cut the excess plastic from ic chips before processing

How much does a table like that cost and where can I get one?

oh and what was the final results? from total to start to amount recovered?

price for this shaker table please.

Curious if they stated how many pounds of chips were processed to get that bucket of material you ran and what would you estimate was the recovery weight

What was the yield on the ~20lbs. of IC powder?

the powder plus jet dry DOES NOT, make a liquid slurry.......how much water was added?

What are your conditions for processing....I have 1000 pounds of Ediacrian (PRE-Cabrian)Concentrated acid washed material that I need gone through...Can travel to you location....Looking to get down to what I really have...All material is gathered in concordance with all applicable law....Thank you...

Nice job on that little table. Do you know where he got the chips?

Would love to see powdered ceramic cpu, like pentium pro!

me agradaria representar este industrial , por que este sistema triunfaria en colombia

My father likes to used a lot the table its very efficient if you make it in private also i use knelson concentrator, am starting a new project at the midle of this year so i want to update somethings thanks

so how much gold was collected?

question is how were they incinerated ?

What is the price

What is the model number and price of this table?

Selam. Bu makina dan bende almak yada yapmak istiyorum bana yardımcı olurmusun uz.

how many pounds of chips?, pounds of powder ? did it take?

You guys have a fine set up and are doing what I am learning but you have definitely taken it to a art form a would love to see more videos on this exact subject maybe even show how a smaller version of this set up could be put together. Thanks for the video keep up the good work and also I was interested in what the total amount you guys got from that run

the black is a type of iron

1:18 smaller pieces of incinerated substrate, they can be crushed further as some of them may contain small bits of gold bonding wire. 1:24 crushed Si wafer from center of IC, that may be leached in AR as it may contain small bits of solder from where gold bonding wire was attached to Si wafer. 1:28 there is your gold bonding wire along with small metallic pins from inside of IC

ما اسم السائل الذي وضعته

NOT A HIPPY! A chemist and HAZMAT TECH. Not to worry, you'll be sick enough to stop soon.

🤯👍

I wonder how much a table cost!?......

YeeeeeeeeHaaaaaaaa

What are ic chips

Interesting. Hope they were properly incinerated. Safety third!

How many.

In my opinion, since the ash is from electronic parts, it is likely that what you are seeing that is gold is plated gold of only a few microns of gold and the rest of the base metal are other material but not gold. As such if you weigh those "gold" dust, it is not going to be the weigh of gold.

Try to remove all plastics out of the equation dude and then the job will be much less fucking around keep working because it pays dividends when we work hard keep on going long live the repubic peace. Shane aka Brains.

the black is iron, run a magnet over it

I should never ever even think about getting or trying to make one of those tables because I'd just be running the stuff through time and time again!! I just noticed that phrase "never ever even" is a palindrome. Cool! Poo

I really like this small table but at $16700 AUD she's a bit out of budget.

Sorry Jason but the setting of your table is obviously not in the way it supposed to be ..... Yes ,- the table slope in two directions ( depending on the size of material and conditions of the deck surface ,- the water amount adjusted to it ( stabil !!!) and the important frequenz of the motion and the "right" motion profil as well ( s. down below) Finer material require a special deck surface and a higher speed rate ,- as all the settings for this peticular material ....... More coarse material a opposite setting You can cut the gold fraktion easy "with water" and have in one hit a meltable product The feed have to be adjuste to the setting of the table also ,- may with a auger or conveyor belt ... If everything is set propper,- you can walk away and do something else .... We ( for instance ) work with a flotationssystem after the table ........ And of coarse we use a demagnetize system , to get rid of magnetic minerals ... But your melting technique is for us a interesting methode to integrate it in our production process ! ( Your smelting and refinering technique with lead or bismuth for small amound of gold is pretty need !) We watch your activity ,- your efford ......and enjoy it ! Well done Great to see you open the hardrock mine !!!!!! ( we learn a lot about hard rock mining !!!!) Shortly back to the motion "picture" ...... Holman or Wilfley ? From Germany ( former placer machine mining in B.C. ) Merry Christmas ,- a healthy and successful 2024

Irn peyn

click bait... says no chemicals... uses jet dry

a quick question ( you work in domain) what is the reason if you incinerate the ic and grind you will got a considerable low yield in comparation with sulfuric acid method?(when use h2so4 to dissolve the epoxy )