How to Screen Print a Bright White Water Based Ink on Black Shirts

Подписаться 68 тыс.

Просмотров 44 тыс.

50% 1

In this tutorial we walk you through screen printing a bright white Waterbased ink on black shirts.
Bucket Scoop - amzn.to/2Y3KxlN
Ulano TZ Emulsion - ebay.to/2CoKlEp
For screen printing equipment and supplies, be sure to use promo code MikeyDesigns at catspitscreenprintsupply.com
Our T-Shirt Screen Printing Registration Template - www.mikeydesigns.com/t-shirt-r...
For Adobe software, use our links below for a discounted rate and to help support the channel.
Adobe Software Discounted (Illustrator, Photoshop) - bit.ly/Adobe-Photoshop-CC-Scre...
Use our link for your Amazon purchases to help support our channel: amzn.to/2oZJRO4
Feel free to leave a comment or contact us if you have any questions about screen printing or graphic design. Please like, subscribe and share our videos so we may continue to make more free video tutorials about screen printing & graphic design.
For custom screen printed shirts:
www.mikeydesigns.com
or contact me directly at matt@mikeydesigns.com or 281.883.4889
Find us on:
Facebook - / mikeydesigns
Instagram - / mikeydesignssilkscreen
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@crumptees 5 лет назад

Forced air is nice to have, but you don't need it.. We cure ours on the slowest speed without forced air and it takes 1:30min through the dryer and it cures the ink just fine 👍 ours has a 4' heating element and have no issues.

@mikeydesignssilkscreen473 5 лет назад

You're absolutely right and I probably should have worded that better. Lots of people cure shirts with a non-forced air drier. Pinning this...

@mikeydesignssilkscreen473 5 лет назад

I had considered using Virus inks, in particular their wet on wet CMYK inks, and they were a little discouraging. I was told I need a gas drier with a longer tunnel and an automatic at the time we still had the manual. Still might give it a try, but they're pricey.

@crumptees 5 лет назад

@@mikeydesignssilkscreen473 i have heard that the washability is not that good.

@mikeydesignssilkscreen473 5 лет назад

@@crumptees Good to know. Not trying to make clients unhappy and waste money.

@Cool_Papa_Funk 5 лет назад

I've been trying to find the right combination of belt speed and temp to fully cure in one pass (we also have a 4' chamber, but I think we have forced air). What temp do you get the shirts up to?

@AWOL1969 Год назад

Great video I’m 54 yrs old and I wish I had started learning about screen printing in the early 80’s and made it my career choice but it’s never too late I’m learning now and it will be my retirement hobby. Thank you and have a great day.

@blackfileNepal Месяц назад

Indeed young man!

@mikeydesignssilkscreen473 5 лет назад

I hope this video demystifies some common concerns about screen printing white water based ink on black shirts. Don't be afraid of water based screen printing!

@tainoink 5 лет назад

Wow! The opacity looks really good. I am looking to do waterbased print for the first time so I will go and use your promo code to get that ink and at the same time save $5.00. 👍Thanks Matt.

@CatspitProductions 5 лет назад

Sweet, nice video. As for curing this ink it really does not need to be in the oven for up to 3 minutes. As long as you reach temp throughout the ink layer you should be fine. I cure mine at about 300 plus degrees and send it through the standard infrared belt dryer once. But that's after they went under an air flash on press. I think the ink takes a little getting used to because it's kinda like cake frosting. But so far everyone is loving this product. There will always be those who prefer something else however ;)

@mikeydesignssilkscreen473 5 лет назад

Awesome feedback, Jonathan! Thanks for sharing your tips on the curing the ink. Always more than one way to skin a cat. ;) What are your thoughts on the hand after washing the ink?

@TheInkBuildUp 5 лет назад

Cool print. 👍

@mikeydesignssilkscreen473 5 лет назад

Thanks!

@frankyfreedomsp8974 5 лет назад

Nice print!

@mikeydesignssilkscreen473 5 лет назад

Thank you!

@coolplanetrelaxation9529 5 лет назад

I'm back. Sorry the time out ,guys, i was working my music channel out. This is me now, formerly known as Richoo. Thanks Mike and Shan for another kick ass. video. 🤘✌🤙

@jayllicampo9908 2 года назад

thank you so much for sharing this video! God bless you bro! 😊🔥

@mikeydesignssilkscreen473 2 года назад

Any time!

@mukunddaga1477 4 года назад

Cool print

@mikeydesignssilkscreen473 4 года назад

Thank you!

@iamuglypeople 5 лет назад

Good to see the Amex waterbased white being used. Recently stocked up with AMEX inks and yet to try them... looks good though.

@mikeydesignssilkscreen473 5 лет назад

I'm impressed with it thus far. Time to get some more colors.

@nineoneoh 3 года назад

I've ben using the same white from Catspit and have had success. I have had some issues with modeling and the ink drying really quick. Other than that it is a nice white and covers well. I haven't done much to test the curing as far as washing the shirts.

@mikeydesignssilkscreen473 3 года назад

Nice! Did it sit up a white when it molded?

@shermarketadi3900 Год назад

If you ever do another of these: it would be nice to see a successfully cured example where you run it twice on cotton and get the bright result. Also following up and comparing to a control after that first wash

@tonyfdesign 5 лет назад

Great info. Would love to see print number 14, when the ink starts to dry in the screen. Then on print 17 when the screen starts to stick to the shirt.

@mikeydesignssilkscreen473 5 лет назад

You got it! Keep an eye out for that video.

@kingburgerkiler 3 года назад

How many prints can you make with the amount of ink you used in the video?

@tamavaiaku66 5 лет назад

nice video..👍👍

@mikeydesignssilkscreen473 5 лет назад

Thanks, Tama!

@sakahex. Год назад

hello,new to this and i have a question about how you stick the t shirt on the station?

@rsofficial13 3 года назад

Nice

@mikeydesignssilkscreen473 3 года назад

Thanks

@slavesong Год назад

is it possible to cure it by letting it air dry?? if yes, i know it would take a long time but i’m just trying to be cost effective because i’m just starting out thanks, and also nice vid!

@joshbrigman578 4 года назад

that is a HEFTY amount of ink lmao. i used catspit plastisol, i never knew they made waterbased too

@Ungalfo 2 года назад

Hey! I've been following your cruze build, didnt know you have a screen printing channel too!

@mikeydesignssilkscreen473 2 года назад

LOL! Yeah, been doing it for a while now. :) This is how I make my living.

@Factory928AC 4 года назад

Mike, say I used this waterbase PFP as an underbase , how long do you flash in order to move on to lay plastisol on top of it? Then what’s the cure time for a mix of waterbase and plastisol print?

@sbaiyassine930 Год назад

I wonder is it necessary to use flash to cure the plastisol ink? And why dont we use plastisol as a white underbase?

@natesheppard2591 4 года назад

Stupid question from a newbie. How or what best practice is there to line the screen up after you flash so it lines correctly on the shirt? Are blends not recommended for bright colors when using wb ink?

@mikeydesignssilkscreen473 4 года назад

No question is stupid in my opinion. You'll need to expose some registration marks in your screens so you can line them up. It can be any object really. Same place on each screen. Use registration color so it'll so up on all your screens in the same spot. You can do halftone blends with wb ink.

@danbarb9728 3 года назад

Hey, i am doring sublimation and HTV as a hobby and now i want to check out screen printing because i saw that first of all you can use your heat press and 2md you can use sign vinyl instead of thsoe UV coatings and third you can use water based inks. Since this is just for fun it should make fun, i saw videos about water based inks where the ink is drying within minutes and it was shown that you can not put the ink back in the original can once you used it. It water based ink really that bad or do you think you can print simple fonts with my method?

@mikeydesignssilkscreen473 3 года назад

Water based is a great way to start, but you just need to back flood and the ink can dry up if you let it sit. You'll need to cure the ink just like plastisol to set it so it won't wash out. Waterbased inks take about 1.5-2 minutes in 330º heat to set and plastisol cures as soon as all the ink reaches 330º through out the film. Good luck and let us know if you have any questions!

@victorgomez282 Год назад

Which mesh did you use? I am struggling a little with the ink drying fast. I just switched to water based. Covers completely different but 100% easier to clean.

@victorgomez282 Год назад

Just caught the part where you used 110.

@solomonakasoba1773 4 года назад

Am a newbie in screen printing from Ghana. Please am mostly into water based for now. I print using the "baby oil technique"( printing on paper) Please how do you do the mesh count?? (Though I have the plastisol ink and I have tried to use to design but I wasn't able to cure it properly. I used a hand dryer for the curing.)

@mikeydesignssilkscreen473 4 года назад

The higher the number, the less ink it'll allow through, and the more detail the screen will hold. You'll have to judge based off of the type of work you do. For paper, high mesh counts will work better. 305.

@nomoreslogans 2 года назад

Hi, there. I'm from Indonesia and I'm too late to learn screen printing, but I don't care lol. Right now, I'm using waterbased ink called "Matsui" (the character is like rubber and elastic). I don't know if you have used that kind of ink in there or not. But, based on the ink character that I use, should I go one hit (couple times) like what you did to get the vintage looks? I hope you read my comment, and have a time to reply it. Tons of thanks for the video!

@mikeydesignssilkscreen473 2 года назад

Hello! I've heard of Matsui. Very popular Waterbased ink. How many times you hit it is up to you and how bright you want it. You could certainly do a print flash print to get a brighter white, or just print it and keep it more vintage looking.

@benjamin-fr9bj 2 года назад

Can you use a flash curer or do you need a air dryer system for water based ink?

@mikeydesignssilkscreen473 2 года назад

You could use a flash with a blow dryer but it would be slow. Force air, or a gas dryer would be best.

@kalenburns4190 Год назад

is it possible to flash with a heat gun? im waiting to get more money to buy a flash thingy.

@mikeydesignssilkscreen473 Год назад

yes, but will take a really long time. I would suggest investing in a flash. Will save you time.

@mr.zooomy 4 года назад

Is it possible that you can use 1 design on 1 screen using 2 colors? the first is water based black ink and the other is white. The Ink always gets clogged so I end up removing the design and chaging it to a new one. Need Help.

@mikeydesignssilkscreen473 4 года назад

David Can. Got you covered in my previous comment.

@hotwheelsreviews9582 3 года назад

Can you put sublimation transfer on a white water base

@mikeydesignssilkscreen473 3 года назад

I don't believe so. I would try discharge because it removes the dye out of the shirt.

@l.a.the.w3026 4 года назад

Best mech count for water based inks?

@mikeydesignssilkscreen473 4 года назад

Depends on the color. For color inks / overlay colors, 200-230. For a base (depending on the ink type HSA, etc.) I would say 156-195.

@mushtaqali9330 2 года назад

How to print a red color watar based on black t shirt

@SurajSinghTomarArya 3 года назад

Was this discharge ink ?

@mikeydesignssilkscreen473 3 года назад

It was a standard opaque water based ink.

@P0TK1LLS Год назад

how long do they stay in the oven ? im kinda having problems with curing my white wb ink

@itsbuttababbyyy2370 2 года назад

How'd you get your logo is is copy paper or ??

@mikeydesignssilkscreen473 2 года назад

I used transparency film with an inkjet printer.

@colinmurphy8119 3 года назад

No mention of ink retarder/ other additives to stop the ink from sticking to the screen

@mikeydesignssilkscreen473 3 года назад

Not needed for this ink.

@juangaytan9103 4 года назад

what mesh count for that design?

@mikeydesignssilkscreen473 4 года назад

We used a 195 or 200. Thanks for watching!

@bonifaciojrjacintos7560 4 года назад

Forgot to flood

@mikeydesignssilkscreen473 4 года назад

:) you caught me. Filming can be distracting.

@Jchot 2 года назад

"pro screen printers" absolutely kill me. They spend so much on chemicals, machines and supplies that promise high quality and flawless prints, then INTENTIONALLY include ink/screen defects in the design. wat

@Jchot 2 года назад

no direct insults, just a funny ubiquitous concept I noticed.

@mikeydesignssilkscreen473 2 года назад

Right! Totally get where you're coming from.