How To! | Seamless Scale Model Jet Intakes Using The Latex House Paint Pour Method. No Sanding!

Подписаться 9 тыс.

Просмотров 67 тыс.

50% 1

My Scale Model Facebook Group, Join today!:
/ 470628085262336
_________________________________________________________________
Links to hobby products
*Paints & Thinners*
Tamiya Paint: amzn.to/3HC0c4t
AK Acrylic Paints: amzn.to/3SRCHsN
Mr Hobby Leveling Thinner: amzn.to/3uKcYGV
Alclad Clear Base: amzn.to/3HsNzcv
Primer: amzn.to/3WaABnF
Testors Dullcote: amzn.to/3OYZyRS
Testors Glosscote: amzn.to/3uVC0qc
91% Rubbing Alcohol: amzn.to/3SNcXh6
*Airbrushes*
Paasche Talon(Great First Airbrush!): amzn.to/3kPDvRy
Badger Sotar: amzn.to/3W7XtnW
Airbrush compressor: amzn.to/3UQKdXr
*Putties & Glues*
Perfect Plastic Putty: amzn.to/3DljFE7
Gorilla Glue Gel: amzn.to/3RspWnv
C/A Glue Thin: amzn.to/3Jmp3KR
Tamiya Thin Glue: amzn.to/4bbjKJV
*Masking Tape & Stand*
Tamiya Masking Tape: amzn.to/3WgsKoR
Tamiya Masking Sheets: amzn.to/3DmkexD
Tamiya Paint Stand: amzn.to/3PndVhN
*Pin Wash Items*
Oil Paint Set: amzn.to/40PZvv2
Detail Brush Set: amzn.to/3nfJVL8
Mineral Spirits Thinner: amzn.to/445Bh2q
Tamiya Gloss Clear: amzn.to/3Lxsnn7
Tamiya Panel Liner: amzn.to/3Tc3MrY
*DIY Weathering Powders*
amzn.to/3qjLmJD
*Tools*
Scribing Templates: amzn.to/4b6tlBA
Sprue cutter: amzn.to/3uQbqPm
Sanding Sticks: amzn.to/4bUGGNW
Micro Drill Bits: amzn.to/3P18uX4
Razor Saw: amzn.to/3TZSlUO
Razor Saw Handle: amzn.to/3vqpGie
Disposable Fine Tip Eye Liner Brushes: amzn.to/3u9JdCK
________________________________________________________________________
Videos links
1/48 Hasegawa Myrt: • FULL BUILD! | 1/48 Has...
BF 110 Full Build: • FULL BUILD! | 1/48 Rev...
Stripping paint: • How To Strip Paint Off...
Drilling Exhausts: • How To Open Up Scale P...
Weathering Powders: • How To Weather Scale M...
Pin Wash: • How To Do A Pin Wash -...
Priming: • Priming A 1/72 Airfix ...
Filling Gaps: • Simple Easy Methods To...
DIY Paint Masks: • Custom Paint Mask How ...
___________________________________________________________
I have an eBay Store! New & Vintage Scale Model Kits: www.ebay.com/str/styrenemodel...
10% OFF any purchase at my eBay store! Use Promo Code "RU-vid10"
Video Edited With Filmora: www.anrdoezrs.net/click-10068...
You can support the channel by clicking the links above! I am affiliate for the companies the links go to. If you click the links and make a purchase I may receive a commission from those companies at no cost to you. Thank you!
00:00 Intro
00:41 Options
00:58 Intake Assembly
01:15 Filler Putty
01:56 Latex Pour Method
04:13 Second Attempt
05:04 Clean Up
05:30 Color Change
06:00 Outro

Хобби

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@jhs8496 2 месяца назад

An ACTUAL TIP and tecnnique on RU-vid! Thank you for this idea.

@StyreneModelersHaven 2 месяца назад

Glad it was helpful!

@davidson4301 2 месяца назад

Just for anyone who’s interested - white radiator enamel paint works really well for this as well.

@StyreneModelersHaven 2 месяца назад

Thanks for the tip!

@chrishawkinson8846 2 месяца назад

I love this type of outside the box (at least my box) solution to a problem like this. It seems much simpler than more traditional approaches while still producing an excellent result.

@StyreneModelersHaven 2 месяца назад

Glad you like it!

@user-js4zx1lr2u 2 месяца назад

Nicely done. I've done too many jets where the biggest mess was the intake(s). Adding this technique to my repertoire.

@StyreneModelersHaven 2 месяца назад

Glad it helped!

@mode1charlie170 2 месяца назад

The result speaks for itself. Well done!

@StyreneModelersHaven 2 месяца назад

Thank you!

@Volsheb_Nik_Studio 2 месяца назад

Have heard about this approach before and now seen it alive! Many thanks for demonstration! I will certainly need it on my projects :)

@StyreneModelersHaven 2 месяца назад

Glad it was helpful!

@briantheprion 2 месяца назад

Legit actual novel tip. Well done and very creative

@StyreneModelersHaven 2 месяца назад

Thank you!

@Iskelderon 2 месяца назад

If you do that, you can usually speed things up by stabbing a small hole through the tape when draining it to get a better airflow.

@StyreneModelersHaven 2 месяца назад

Great tip!

@allanford9731 2 месяца назад

I haven't read all the comments here so, apologies for any possible duplication. For those of us on the European side of the pond, "Latex" paint = water based emulsion paint! It uses a latex binding agent. So, for all of us, myself included, desperately looking for "latex" paint, it's bog standard emulsion!!😂

@StyreneModelersHaven 2 месяца назад

I am assuming the same paint used to paint home interior walls would be in Europe? This is called latex paint in the US. It is water based and has a rubberized component (latex).

@Paul-yh8km 2 месяца назад

Highly unlikely latex is actually used in any paint anywhere these days, most latex use has been replaced with synthetic polymers, including in tyres although in that case some latex is still used. It's like the term Waxed paper, not really a real thing in most cases these days, since wax has largely been replaced with polymer substitutes.

@occamsrayzor 2 месяца назад

Now THAT is a great, original tip!

@StyreneModelersHaven 2 месяца назад

Glad you enjoyed it!

@modelnut 2 месяца назад

Great ideas, I have the Airfix Vulcan 🖖 to complete the intakes to do. Thanks. 😊

@apieceofstring 2 месяца назад

This technique might also be applicable to flying models, where performance can be affected by the smoothness of airflow around eg ducted fans etc. Food for thought.

@StyreneModelersHaven 2 месяца назад

Great point!

@dbohnsai1011 2 месяца назад

Absolutely amazing idea and result!!!

@StyreneModelersHaven 2 месяца назад

Thank you!

@juliangriffiths7298 2 месяца назад

I tried this tip today and it works really well. I'm in the UK and I used Bedec Multi Surface Gloss White from Toolstation, which dries quickly. Great tip; thank you!

@StyreneModelersHaven 2 месяца назад

Thanks for sharing! Really appreciate the feedback. Cheers!

@phayzyre1052 2 месяца назад

Thanks, I can’t wait to try this myself. For years, I have painstakingly used all kinds of sanding sticks (both store-bought and homemade) files, etc. to smear putty on the seams, sand, then paint, but this seems like, although it’s a little messy it’s a lot less effort and the results are fantastic! 👍👍🙂

@StyreneModelersHaven 2 месяца назад

I too was impressed with the results.

@raytheron 2 месяца назад

Ingenious! Thanks for sharing!

@StyreneModelersHaven 2 месяца назад

My pleasure!

@fotomakr 2 месяца назад

Brilliant solution! Thanks for sharing.

@StyreneModelersHaven 2 месяца назад

No problem 👍

@RichardsModellingAdventures 2 месяца назад

Fantastic idea 💡 👍😀

@StyreneModelersHaven 2 месяца назад

Glad you think so!

@joshuamurphy4928 2 месяца назад

This has got to be one of the weirdest tips I've ever heard of on the surface (pun intended). But that works amazingly well. Will keep this in mind for my next aircraft build. Love your channel. Keep up the good work.

@StyreneModelersHaven 2 месяца назад

Glad it was helpful!

@logiclust 2 месяца назад

excellent tip and timely too!

@StyreneModelersHaven 2 месяца назад

Glad you think so!

@WhiskeyTango84 2 месяца назад

I saw this on a website, can't remember where but good to see this in video format

@StyreneModelersHaven 2 месяца назад

Thank you!

@thebobloblawshow8832 2 месяца назад

Great top. The intakes look great.

@StyreneModelersHaven 2 месяца назад

Thank you!

@Armafly 2 месяца назад

Great tip. Thanks!

@StyreneModelersHaven 2 месяца назад

Glad it was helpful!

@juanluis1969 2 месяца назад

Yes!!! Helpful indeed. Thanks!!

@StyreneModelersHaven 2 месяца назад

You're so welcome!

@Paul-yh8km 2 месяца назад

Great idea and you must be congratulated for taking a risk doing that!!! Apparently latex paint is just emulsion paint in the UK. AFAIK latex is not used in paints much anywhere if at all. It's been replaced with synthetic polymers.

@warrenchambers4819 2 месяца назад

Wow now this will come in handy

@StyreneModelersHaven 2 месяца назад

Thanks for watching!

@stuff31 2 месяца назад

Very clever!

@StyreneModelersHaven 2 месяца назад

Glad you think so!

@whytebearconcepts 2 месяца назад

I use Mr. Hobby white and thin it with Acetone to nearly a fluid. I use a brush to apply the putty. Consistency can be from thick yogurt to milk, so you can use the thickness you want. If you practice you can actually eliminate any sanding by going back with an Acetone wet brush and smooth the edges. But this looks really cool too.

@StyreneModelersHaven 2 месяца назад

Would love to see your technique. Please post a video.

@whytebearconcepts 2 месяца назад

@@StyreneModelersHaven Not a problem, right now I'm finishing up a 1/72nd scale Zvezda Su-39, I have an Italeri Su-27 up next that I'm absolutely sure will have gaps needing filling. I'll post a link when I get it done!

@robbie.205 2 месяца назад

Too cool 😎

@spacecitymike 2 месяца назад

Clever idea

@StyreneModelersHaven 2 месяца назад

Thank you!

@georgevprochazka5316 2 месяца назад

Good job !

@StyreneModelersHaven 2 месяца назад

Thank you! Cheers!

@garthbarrett6067 2 месяца назад

very clever!

@StyreneModelersHaven 2 месяца назад

Thank you! Cheers!

@ritamajor1092 2 месяца назад

Very cool technique. Will have to try this. So tired of fighting seams.

@StyreneModelersHaven 2 месяца назад

Thank you!

@ibidesign 2 месяца назад

Nice!

@StyreneModelersHaven 2 месяца назад

Thank you! Cheers!

@SprueFascinationChannel 2 месяца назад

Nice tip 👌

@StyreneModelersHaven 2 месяца назад

Glad you liked it!

@BenjWarrant 2 месяца назад

Genius!

@StyreneModelersHaven 2 месяца назад

Thank you!

@rustykilt 2 месяца назад

most helpful

@StyreneModelersHaven 2 месяца назад

Glad you think so!

@natalebabbo-gunplaanddioramas 2 месяца назад

Clever!

@StyreneModelersHaven 2 месяца назад

Thank you!

@0Sabik0 2 месяца назад

wow

@c123bthunderpig 2 месяца назад

At first you think wow that's a lot of paint, then realize there is no way to use a tiny bottle or tin of model paint to accomplish this . Plus you can always look at returned mixes the paint store if you don't have paint around the house. Thanks for an awesome tip, Cheers.

@StyreneModelersHaven 2 месяца назад

Yes, exactly or buy a sample small tin of paint at the hardware store.

@maxsmodels 2 месяца назад

You have invented PUTTY-PAINT!

@StyreneModelersHaven 2 месяца назад

Lol!

@Drezrale 2 месяца назад

Incredibly good idea, but small correction they haven't really made latex paint in about 20 years now as its all polyurethane or oil now. Don't use oil for this as acrylics cant bond to it. Also fun fact(can supply proof if needed to some extent), house paints are chemically identical to most hobby paints so you can thin them down with water and get a very similar result.

@StyreneModelersHaven 2 месяца назад

Great info!

@jimmccormick6091 2 месяца назад

Useing house paint is way over kill. You can use a producy called White-Out (Bic). This was suggested many years ago, when White-out was more prevelant.

@StyreneModelersHaven 2 месяца назад

If you can't get enough white out, house paint is another way to go.

@davidkendall1614 2 месяца назад

Beauty of this is if you get it wrong, it’s latex…wash it out!

@StyreneModelersHaven 2 месяца назад

great point! Thanks for watching.

@KhroweDontYouKnow 2 месяца назад

Grab some milliput, roll, press, apply, done. What are you doing my guy?

@StyreneModelersHaven 2 месяца назад

If it works for you, great! Lots of ways to accomplish the same task. Please post a video of your technique.

@melvynjones3904 2 месяца назад

tippex is good for this seam filling

@StyreneModelersHaven 2 месяца назад

Interesting. Not familiar with that.

@melvynjones3904 2 месяца назад

@@StyreneModelersHaven . If you try it, use original not the green one, it self levels said you flood the trunk and “swirl “it about, it should cover it all in an even coat. Even has a brush !

@peterfleischmann2874 2 месяца назад

Sigh… This is a technique I personally developed like 20 years ago. I first used it on an F-16 build and sprung it on the modeling world and was excited! When I posted this technique, people called it “lazy” , and I should “just fill those seams like a real modeler”. Too funny after all these years it has caught on.

@StyreneModelersHaven 2 месяца назад

Interesting!

@andresybanez2635 2 месяца назад

.....👏👏👏👍👍👍👍

@robertmunoz7543 2 месяца назад

Spock says "fascinating"!🤔 Jman

@StyreneModelersHaven 2 месяца назад

A fellow Trekkie!

@robertmunoz7543 2 месяца назад

@@StyreneModelersHaven STOS for me!😁 Jman

@davidkendall1614 2 месяца назад

Logical 👍

@shaunwilliams4231 2 месяца назад

That can of paint will last you 652 years!!

@StyreneModelersHaven 2 месяца назад

LoL!

@mikejungferman4744 2 месяца назад

Well looks like your around $80.00 into house paints! Behr paint ain't cheap

@StyreneModelersHaven 2 месяца назад

Just using left over paint from around the house.

@davidkendall1614 2 месяца назад

@@StyreneModelersHavenAnd it’s not like you are using a gallon

@BennyCFD 2 месяца назад

Hmmmmmm...........................Seems unnecessarily complicated....... Maybe he needs it to be for some therapeutic reasons

@StyreneModelersHaven 2 месяца назад

Building models is my therapy!

@StyreneDreamsOfficial 2 месяца назад

Yeah I was going to say the model building in itself is the therapy

@jameshogge 2 месяца назад

Most model building techniques are unnecessarily complicated and I used to skip them. That's why my models always used to look like junk while these look incredible

@williamelewis464 2 месяца назад

Here is a question, why isn't the hobby moving into the 21 century with the rest of technology? Why is it stuck in the 60's, it's time to ditch the BS kits

@StyreneModelersHaven 2 месяца назад

So many great kits and products are coming out it seems like everyday. It really is the golden age of the hobby.

@davidkendall1614 2 месяца назад

Agreed! Biggest pet peeve is aircraft kits not including a canopy paint mask. How much does a piece of precut tape cost? If they have the tech to tool a kit, they have the tech to cut a mask. A $200 Cricut will do the job with a cut file. But noooo…spend more for a aftermarket mask or hours masking.

@allanford9731 2 месяца назад

@@davidkendall1614 Well, I don't use pre cut masks because I think they are not only very poor value for money, they can add a lot to the cost of a kit. The prices for a few bits of sticky paper are ridiculous so, I just make my own. As for including in a kit?Well, that's not a bad idea. I'd think that the economies of scale would keep the prices down so, they wouldn't add to much to the cost of a kit. Some kits DO include masks but,not many.

@davidkendall1614 2 месяца назад

@@allanford9731 Good point. I’ve done kits where the mask was included…I am not talking about Eduard ProfiPack where you pay additional for the extras, but regular kits…so if THEY can do it, all manufacturers can. Even uncut masks in some Tamiya kits are useful. At least the required shapes are provided. So surely every manufacturer could at least print the shapes to scales, even if it’s in the instructions and not on self adhesive! Make it easier to self cut masks with precision. Glazed canopies with many individual panes of glass of complex shapes are a PITA, and they don’t have to be.

@tsman2709 2 месяца назад

@@davidkendall1614 ICM has included a 1:1 mask template printed in the instructions for their most recent kits. (i.e. A-26). That seems like a great deal for us customers and a really low cost for the manufacturer!