How to SEND INSERT FX to selected INSTRUMENTS or TRACKS!

Подписаться 4,1 тыс.

Просмотров 12 тыс.

50% 1

Check out ALL of the equipment that I currently use for my live looping set up on my Throne Storefront here throne.me/rossgallaghermusic
If you have found the content useful, you can show your appreciation and buy me a coffee at the following link www.buymeacoffee.com/rossg
Here is a complete list of everything that I currently use, with separate links for you to make your purchases...
PEDALBOARD
NU-X BUMBLEBEE PEDALBOARD (Large) amzn.to/42f1zh4
PEDALS / ACCESSORIES
BOSS RC-600 amzn.to/3xyhVE5
BOSS FS-7 DUAL FOOTSWITCH amzn.to/3I9aTuE
SONICAKE ABY SWITCH amzn.to/3AN6Hxf
POLYTUNE 3 MINI amzn.to/3p5zOco
M-AUDIO EXPRESSION PEDAL amzn.to/3ScV2zS
BOSS GA-FC Foot Controller
SONICAKE Daisy Chain amzn.to/42xitrg
3M Dual Lock Tabs amzn.to/3nypOIt
FOOTSWITCH TOPPERS
MOOER PEDAL TOPPERS here amzn.to/3KgSmz2
SONICAKE (US link) www.sonicake.com/products/foo...
SONICAKE Footswitch Topper(Amazon UK link) amzn.to/3x84HxM
GUITAR ACCESSORIES
BOSS KATANA 100 MKII Amplifier amzn.to/3NNPf3l
LEKATO Wireless System amzn.to/44ySqSw
ROLAND Black Series Instrument Cable amzn.to/3M3gaXu
ELIXIR Electric Guitar Strings amzn.to/41b7yT6
ELIXIR Acoustic Guitar Strings amzn.to/416dRra
G7th Capo amzn.to/42w322M
FAST FRET amzn.to/3B3b9Ic
PERCUSSION
MEINL Pickup Cajon amzn.to/3nBoncd
MEINL Egg Shakers amzn.to/42cu2nZ
Snare Stand amzn.to/3NKB3Ih
OTHER ESSENTIAL ACCESSORIES
HERCULES Mic Stand amzn.to/44BA4A9
Mic Stand ACCESSORY TRAY amzn.to/42bUfDo
Mic Stand TABLET HOLDER amzn.to/42eoGc0
SHURE SM58 Dynamic Microphone amzn.to/3nyR3CA
TOURTECH Monitor/Amp Stand amzn.to/3pePTwy
Wireless MIDI System amzn.to/418bN1L
USB Camera Adapter amzn.to/3NMZoxq
All links are affiliated and by purchasing products through the links above, a small commission will be sent my way, however the price you pay will stay the same. This will allow me to make more great content for you amazing folks and your support is greatly appreciated!
--------------------------------------------------------------------------------------------------------------------------------------------------------------
A quick run through on how you can choose the destination for your Input FX and Track FX. Enjoy!
As always, if you find the content useful, consider subscribing to the channel, like, share and comment below!
You can also say thank you and show your support by buying me a coffee at the following link...
www.buymeacoffee.com/rossg
Your generosity is always appreciated and I will see you soon with another video. Ta ta!!!

Опубликовано:

3 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@matthieusamouiller 6 месяцев назад

I’ve been asking myself that for 2 years now, I’m so glad I found your videos man !!!!

@RossGallagherMusic 6 месяцев назад

So glad it helped!

@jerryodom7358 Год назад

Thank you, your the best manual guide on this unit…I really appreciate your help….thanks for sharing….

@RossGallagherMusic Год назад

Thank you for such kind words!

@royalcuervo8877 Год назад

Thanks for ALL the videos! They really helped a lot! Subscribed

@RossGallagherMusic Год назад

Ahhh glad you're finding them useful and thanks for subscribing!!!

@matstokesmusic Год назад

Great stuff Ross. Really helpful and simple 😃👍🏽

@RossGallagherMusic Год назад

Cheers, Mat. Glad it was helpful!

@TamuMassif 9 месяцев назад

Been searching for this. Super helpful. Thank you!

@RossGallagherMusic 9 месяцев назад

Glad it was helpful! You're very welcome.

@elleyoung6382 9 месяцев назад

This is what ive been looking for..thanks alot for making this tutorial

@RossGallagherMusic 9 месяцев назад

You are most welcome. Glad it helped!

@basildog007 Год назад

Thank you so much 🙏

@RossGallagherMusic Год назад

Always welcome!

@LisaWarrenMusic Год назад

Thanks so much:)

@RossGallagherMusic Год назад

You're welcome!

@aaronsimonds2880 4 месяца назад

I'm so thankful for you! I love my new RC-600 and your videos have helped me dive in and have FUN! Thank you! Sub'd!

@RossGallagherMusic 4 месяца назад

Awesome! Thank you!

@antoinenioi6863 11 месяцев назад

Thanks man ! Very helpfuly top

@RossGallagherMusic 10 месяцев назад

Glad you liked it!

@dancassidy7471 Год назад

Such a user friendly dly videos you R my go to person

@RossGallagherMusic Год назад

Cheers, Dan! Glad to be of service 😌

@VictordeRut 8 месяцев назад

Hey! Great video 🙂 I've been looking for ages how to set effects to the rhythm, I can't figure it out. Do you know how? Thanks

@pinouilleinthesky 5 месяцев назад

Thanks !

@RossGallagherMusic 5 месяцев назад

No problem!

@PatDeJongeSoundwise 4 месяца назад

Hi Ross, thanks for the video! Just received my RC600 and I'm trying to set the fx as you show here in the video. But my FX 4 doesn't do anything. I've set it up as you explained, but the button doesn't switch on (or off) the effect block, it does nothing when I tap it. Any suggestion? could the button be assigned to something else from factory that would prevent it being used as this fx switch? Cheers!

@luapmada1 2 месяца назад

Hi, useful video as always. What about adding let say reverb to the drums (I just switched from RC500 to RC600 and reverb on drums was very simple to use). Thks ;)

@bobbylilcat6880 10 месяцев назад

Hello Master! So if a plug a guitar, a bass and a mic into the rc600, assigned to track1-2-3, play with the others simultaneously, can each member have 4 different effects on, or only 1 each and a “spare”?

@Luchodela Год назад

Thank for this video! What if you what your compression assigned to your inst 1 and inst 2? Bacause maybe you have a layer of bass and then you play the guitar? Would you need to use a track effect for the bass and then input for the guitar? Thanks a lot!

@RossGallagherMusic Год назад

Thanks for the comment. You can apply Input FX (up to 4 at a time) to any instrument or microphone and then these FX will be recorded to the track. The track FX are only applied after the loop has been recorded which means the Track FX won't take effect when being performed live. Hope this helps, Ross

@Luchodela Год назад

@@RossGallagherMusic Thanks Ross!

@LauraBatallaOm 9 месяцев назад

Hi Ross, thanks again! Can we apply an effect at system level, not just memory level? Could you briefly comment how to do so? Cheers.

@RossGallagherMusic 8 месяцев назад

Hi Laura, I don't believe it's possible to apply FX across the entire system, but what I do recommend is to create a template you're happy with containing all your FX, and then 'copy and paste' this template to your desired memories. If you haven't yet looked at the RC Editor, it's a great piece of software that will allow you to do many things you can't do just with the unit. Including copying assigns, FX, and settings to multiple/all memories, with just the click of a mouse. This might be a useful tool for you. Hope this helps. Ross

@manuelrodriguezmourgues5974 Месяц назад

When I activate the track effects, I hear them only after the loop is recorded. How can I hear them before to record?

@finnambers Год назад

Thanks for this. Have you had any glitches when trying to insert an input effect on all inputs? I had a similar set up as per your video inserting a harmony input effect just on the Mic 1 (which worked). But when I tried to insert a reverb on all inputs, the reverb effect switched off (despite the display lighting up the reverb effect to indicate it's activated). I dialled it back to insert on just one instrument input (guitar) and the reverb came on again. I'm sure this was working across all inputs, but it seems like sometimes it flicks back to not working. Any clues?

@RossGallagherMusic Год назад

How have you got your outputs routed? I believe this is an issue when routing to separate outputs.

@finnambers Год назад

@@RossGallagherMusic Yes, I have all instrument inputs (and rhythm) routing to all the left outputs and both mic inputs routing to right outputs, so you seem to have nailed it thanks Ross. How did you find out? Do you know if Boss/Roland are aware of this issue?

@RossGallagherMusic Год назад

@Finn Ambers no problem at all. This has come up a few times on the BOSS RC-600 Facebook group, so if you've not already joined, I recommend taking a look. I'm not sure if BOSS are aware but I believe they do monitor these groups so it's something they might be looking at. Ross

@finnambers Год назад

@@RossGallagherMusic will do thanks Ross

@acousticabuse6953 Год назад

You still making videos topman? Really appreciate your tutorial videos 👌 literally out the box yesterday, working on getting it set up, quick question can I apply a pedal (rc600 or external) to play a one shot variation of the drum pedal?

@RossGallagherMusic Год назад

Absolutely! There's always things to talk about with this unit, so plenty more videos to come. If I understand correctly, you'd like to set up a pedal to play a kick sound or something along those lines?

@acousticabuse6953 Год назад

@@RossGallagherMusic Not a single drum sample as such, you know when you move the "variation" switch it does a drum fill onto the next one. Assigning a pedal for such a thing to make the drumming sound more organic changing between parts of a song or at particular parts. Thanks for the speedy reply mate, thought you'd be out gigging haha 👍😎

@acousticabuse6953 11 месяцев назад

Any update on this query please Ross?

@eafy811 8 месяцев назад

How do u get the effects on the screen in the first place? g2b etc?

@RossGallagherMusic 8 месяцев назад

Press the left and right arrow buttons whilst on your main display screen, to switch between the different display options. I believe you can also do this within the main settings menu.

@thiagonovais89 11 месяцев назад

Question: my headphone output has a very poor quality. I make sure i have < 100 output, my input (guitar) < 100. Once i record a loop, the quality on the headphone is poor (and very low volume), the output whatsoever on my amp is of good quality Any chance you had a similar issue? Am I missing something basic? Thanks for you reply in advance. PS: your videos are really helpful and instructive!

@RossGallagherMusic 10 месяцев назад

Hi there, I can't say that I've had that issue myself. Is the quality of the recording poor, or just through the headphones? Have you tested another set of headphones by chance? Also, perhaps try to adjust the input/output levels to see if that's causing an issue. Ross

@thesundreamers8423 Год назад

What if you want dynamics for Mic 1 AND Mic 2...... but not the instruments?

@RossGallagherMusic Год назад

You could send the Dynamics Input FX just to your Mic input via the INSERT option shown in the video. If you want it going to both Mics, you'd have to use 2 different FX, unless you go to your INPUT settings and turn on Stereo Link for the Mic inputs. This just means that your mic inputs will act as one and whatever you do to one, will also affect the other. Hope this helps. Ross

@thesundreamers8423 Год назад

@@RossGallagherMusic Thank you! Great idea!

@cleaningagent101 2 месяца назад

I’m so confused - what is the difference between track A and track 1? And why did you mention 4 input fx, A B C and D, when on the machine it only says A B and C (no D)?

@RossGallagherMusic 21 день назад

Tracks are labelled as numbers (1-6) and FX are labelled A-C for input FX and the same for track FX. There are 4 FX, so you can access FX D, but due to the layout of pedals on the unit, you can only turn on or off FX A-C by default. Ross

@bsvirsky 3 месяца назад

My impression is that if you could speak twice as slow and add an example of actual use of what you are talking about, the effectiveness of your guide to the viewer can increase. On the other hand speedy talking has an advantage of not making audience to fall asleep... It's a matter of speaker personality as well... you are not feel to me like a boring person :)

@RossGallagherMusic 3 месяца назад

Thanks for the feedback. You can always adjust the playback speed to 0.75x, which will help slow down the speed of dialogue and help you to digest information.

@frantisek-psotka 4 месяца назад

Thanks for sharing. One important thing to note: you are talking about sending effects, but you are inserting effects, not sending them. This is common basic terminology related to mixing. Send insert effect is non-sense. You insert effect to a track/input or you send effect from a channel. Effect is inserted OR sent. So when you are talking about sending insert effect you are either technically wrong and its very confusing. I was expecting that its possible to send effect on RC 600, but its possible only to insert effect ... fix at least video title "how to assign insert FX..." or "how to insert FX to selected ..." :) Thanks again, regards!

@RossGallagherMusic 4 месяца назад

Thanks for the feedback.

@frantisek-psotka 4 месяца назад

Otherwise HQ content! ;)

@Jaujau933 Год назад

Not your best vid ☹️

@RossGallagherMusic Год назад

Thanks for the feedback

@th3gr81 8 месяцев назад

Not your best comment. 😢 At least give them some constructive feedback.

@mbeliv3763 Год назад

Thanks for all My issue is that i have to push twice my Fs- 7 to turn on or off fx Can you help me?

@RossGallagherMusic Год назад

Have you changed the polarity settings on the side of the FS-7? Sometimes if you experiment with those and then change the assign from toggle to moment, this could solve your issue.