How To Set CNC Offsets In Mach3 After Setting Your Soft Limits.. 

If you set your bit with the offset ,then on the bed while the bits in the spendel you can put a collar on the bit and do that with all your bits and put number put them in under different settings that how I use the offsets. When I use the same substrate for the job. Then when I set a another job I set all my dits in the offsets and all of my bits in er20 c and bits already to go all got to is hit button

Great video corvette Msybe you csn help me with other issue...is there s way to disable or reduce current to stepper motors when are idle. Using mach3?

My CNC controller was recently changed from an ethernet connection to USB by build your cnc due to a driver and the BOB going out. Since I got it back it has not worked right. I did load my xml into mach3, I had the machine coordinates at the front right of the machine, I would place my work piece on the table, set to work coordinates over the piece and it worked fine. now I cna't get the machine coordinates to the front/right and my work pieces show off the table. Any suggestions?