Тёмный

How to set the cable length for manual hub Interfaces 

enviolo
Подписаться 4,5 тыс.
Просмотров 14 тыс.
50% 1

Опубликовано:

 

21 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 11   
@aaronbruckelmeyer
@aaronbruckelmeyer Год назад
Are the dimensions in this video consistent for the older Nuvinci Units, specifically the N380?
@tkoppis
@tkoppis Год назад
hi, did u find out? I have an older nuvinci as well.
@aaronbruckelmeyer
@aaronbruckelmeyer Год назад
@tkoppis yes these numbers worked for me to set up my new Nuvinci N380 I got off of Amazon.
@vincentdelporte
@vincentdelporte 9 месяцев назад
For the overdrive cable: Is the cable length 111mm or 114mm? Is it always 120mm for the underdrive cable? Does cable length differ depending on models (hub, shifter)?
@enviolo
@enviolo 9 месяцев назад
Hi, the lenght for the overdrive cable is 114mm and 120mm for the underdrive cable. These lengths are the same for all our models regardless the mounted shifter or hub.
@bathroomsessions
@bathroomsessions 10 месяцев назад
Cable shielding fully seated, adjusters fully in full overdrive End of cable housing: Small bit, 120 mm (12 cm) Turn full underdrive Large bit: 114mm (11.4 cm)
@bathroomsessions
@bathroomsessions 10 месяцев назад
Was it interns who designed this and interns who tested this?
@michaelalexander8926
@michaelalexander8926 2 месяца назад
Followed these instructions and had no issues. I used cables from the bike shop, so the long or short cable identifiers didn't apply, but I had marked the overdrive cable with masking tape when I disassembled the cabling. I needed to replace the cables due to fraying inside the housing...pretty messed up in there. Couldn't turn the shifter more than 50% of normal...hope this isn't a reoccurring issue.
@enviolo
@enviolo 2 месяца назад
Good to hear this video helped changing the cables, if you encounter any issues you can always contact us via support@enviolo.com.
@Redreck1
@Redreck1 9 месяцев назад
Hi i can't get an allen (hex) Key to fit the cable clamps. I've tried 3 different 2mm keys. Do i need a special tool?
@enviolo
@enviolo 9 месяцев назад
Hi, the clamps can be tightened with a regular 2mm hex key. If the issue persists, please contact us via support@enviolo.com.
Далее
The dumbest bike law you've never heard of
10:10
Просмотров 3,5 млн
Кольцо Всевластия от Samsung
01:00
Просмотров 377 тыс.
Немного заблудился 😂
00:16
Просмотров 263 тыс.
ALLES OVER DE ENVIOLO AUTOMATIQ: Dit moet je weten
6:10
Bike Cable End Crimping | Tech Tuesday #231
4:05
Просмотров 32 тыс.
Most People Don't Know How Bikes Work
11:22
Просмотров 22 млн
Is enviolo the best internally geared hub for eBikes?
16:01
Кольцо Всевластия от Samsung
01:00
Просмотров 377 тыс.