There is a cure for cancer but big pharm has bought the cure for Billions and have put it in a VAULT so no one can get to it. AND this is because the medical industry would lose 100's of billions . . this is what they refer to as GREED and not doing the right thing for the HUMANS.
There's a cure for AIDS. They take an AIDS resistive person, take some bone marrow and transplant it, then the person is cured. Why this isn't world news every day I have no clue!! Two people have been cured this way ...proven cured 100%
i really love your very clear explanation sir. my power amp just arrived so i checked your channel about bridge mono connection and once more i learn a lot thaks you sir God bless.
This video was perfectly explained. Well detailed and said. I now understand what I was looking for. I searched the whole internet and finally got it. Thanks bro.
You're welcome, thanks for watching! If you would like to support the channel please consider signing up to become a patron at www.patreon.com/glbproductions?ty=h Every little bit helps!
No doubt the best explanation that I have seen so far for stereo, parallel and bridge mode amplifier settings and speaker connections. You make it real simple and easy to understand even for beginners. THANKS for such a great video.
I admire your safety precautions; power off, speakers disconnected BEFORE doing anything. You are a true safe pro! Thank you for your contribution to the ProAudio industry.
Thanks for this very comprehensive guide on the bridging of the amp for one subwoofer. I almost threw away my 500w per channel power amp when I got a 800w subwoofer.
Thank you very much. It's very difficult connecting amps and speakers with someone who has never worked with sound system gear who thinks they know it all. This video, if he pays attention and doesn't get me all mixed up, will show him what I've been trying to tell him all along. I had never worked with speakon cabling before and that is what we have now and you have taught me a tremendous, invaluable amount of knowledge concerning the use of these cables. This has probably cost my friend, I know it all, tons of money. He has blown amps, speakers, tweeters...and the list goes on. Especially if I still can't get him to listen to you, me or anybody. Thanks again.
@@GLBProductions LOL. He owns half the gear and he's my brother in law. But u r rite. Live gigs we usually try to hire an outside person and throw it all on them. No, I end up being the guy who has to hook everything up while he barks and complains. Last time, I threw all that on him and he freaked out. I just ran in and fixed things real quick. IN and OUT.
An extraordinarily lucid presentation of a complex and, for me, otherwise baffling topic. Thank you for sharing your knowledge and highly superior presentation skills.
Glb, i love your videos, but im to dumb to understand it all. I have two satelite speakers (passive)at 120watt and 8 ohm, and one subwoofer 200watt 8ohm (passive) all with just normal wire, so no rca jacks. Can you pleas give a few examples of amplifiers i can use? Thank you
You're welcome! That amp has a dedicated bridge mono output that uses the standard +1/-1 speakon pin assignment so you can hook up with standard cables.
thanks this was great video, I did not understand all this for the last 20 years but from watching this I now know and can be positive of what I am doing. Thanks a lot!
Thank you. Searched for 30min trying to find ANY videos on passive speakers much less how to setup properly. Thanks again. Only complaint, with my ADD mind there were few times I drifted away. [no offense but I felt like I was back in high school 20+yrs ago, listening to boring history stuff but had to fight my ADD and keep focus cuz if I don’t I’ll fail the class and have to repeat the grade all over again. 😂] ( maybe throw some jokes in smile a bit in your voice. Seem a bit happier) but other then that 1 small constructive criticisms, it was very helpful. THANK YOU👍🏻👍🏻👍🏻👍🏻🤡😉🙃😁
Jacob Falk It depends on the amplifier, but I personally have never seen an amplifier with a 1/4" bridge mono output. On amps of that generation the bridged output was always on binding posts.
Jacob Falk You're welcome. If you would like to support the channel please consider signing up to become a patron at www.patreon.com/glbproductions?ty=h Every little bit helps!
Sir I thank you for your video lessons here . I am a novice in what your sharing . I simply know basic knowledge on setting up my own active and passive speakers each having their own system . What I want to learn is how to combine both active and non active speakers or is this advisable otherwise I wouldn't anymore think about this . I am not really a pro DJ or soundguy and just do this as a hobby and when my friends would ask me from time to time for all of us to have fun . I learn better visually so I will be. Dry to see you doing a demo on this subject if you don't mind . You really take time explaining and showing everything in such a way your style is not. Why confusing to watch and listen too. Thank you.
Finally someone who knows how to use language to inform others without um,ah double ahhhh .In Bridge mode can you have more than 1 speaker connected ??? Thanks
Splendidly clear explanations without pointless repetitions or not needed information to confuse people with less knowledge. Was just trying to find some insight into bridging with speakon cables. I found out my amplifiers use the one where you need to reroute the wires, so will be using an adapter in the end of the cables when I need to bridge the amplifiers for larger setups. Subbed and hope to see more great videos like this in the future.
Thanks for watching! Another method for amps that are permanently rack mounted is to bring the amp outputs out to panel mount speakon connectors - you would have one each for channels A and B, and one more for bridge mode, wired to the binding post outputs. If you would like to support the channel please consider signing up to become a patron at www.patreon.com/glbproductions?ty=h Every little bit helps!
@@GLBProductions I honestly had no clue that bridge mono was a little more complicated. If not for your video, there's a good chance I'd have unknowingly blown up some equipment. I'm a bassist who's using power amps to give me my stage volume.
Oh yes, this is one area where you really do need to know what you doing... mind you, modern power amps are generally very good at protecting themselves from all manner of human error, including dead shorts in the output wiring 😱
Absolutely amazing videos! Very informative and to the point. Thank you for making them and please keep them coming! If you're taking requests, I'd love to see a video about connecting a powered sub. Thanks!
+drbumface You're very welcome, thanks for watching and supporting the channel. Yes I have a video on connecting powered subs in the works. Stay tuned!
I’d heard about bridging before, but the technicalities I never understood, until. THIS VIDEO. LOVE YOUR FORMAT-- direct, simple, serious,, with just enough humor to keep it interesting. (“You have been warned”) Thank You! Now, can a multizone amplifier be bridged in the same way ?
Thanks for watching! Multizone amplifiers designed for paging and background music are typically not designed to be bridged - consult the owner's manual.
Man you bring knowledge to beginners mode with expert information. Where's the 1000+ button LIKE for the channel. I have talk to ingeniers that seen to be friendly and wen it comes to asking a simple question they shut down and offer you "help" by a exchange of money. Thank you for sharing your knowledge I know it may cost you a lot to learn but sharing is priceless.
My Friend thanks alot for your wonderful video. Very clear the audio and video its self. i hope you post more video like this so you can teach alot more thanks and GOD Bless you my friend.
thank you for showing me this i had no clue tell i watched your channel now that i know how to do this i must put it to action i hope i don't disappoint u
Another great video. Thanks so much for sharing.. Your explanations are always so clear & informative. You have a calm soothing way about you that makes it a joy to view, learn & listen too. Thanks again. :)
this teacher is very clear.One question I want to ask is what is a Rotel linkcable.I bought a Rotel RC-1572 pre-amp.The pre-amp is powered on but no signals in either input stage.
FIRST!.. i was waiting for this video.. Thanks Bruno for explaining how to do Bridge mode.. i had a sense of how to but you made it really clear and you explain it so that i feel comfortable in doing Bridge mode on my QSC PLX3402.. Thanks a lot!!
You're welcome, thanks for watching! If you would like to support the channel please consider signing up to become a patron at www.patreon.com/glbproductions?ty=h Every little bit helps!
Clearest explanation ever of how bridge mode works and how to modify the connectors on Speakon cables. Thank you Sir. Question: I intent to run two 8 ohm speaker cabinets in mono bridge mode (Crown XLS 1002). After modifying the amp end of my Speakon cable per the manual - I can then "daisy chain" the second speaker cabinet to the first, and I would then be bridged into a 4 ohm load, correct?
Correct - remember that the only modification you need to make is at the amp end of the first speaker cable. The second cable joining the two cabinets together is standard wiring at both ends.
@@GLBProductions It was. I was getting ready to use my revamped PA for a work party. And I was looking for a way to use my mixer's built in crossover. Your video saved the day. Thank you again.
