How To Set Up The Kreg® Adaptive Cutting System Project Table

Подписаться 202 тыс.

Просмотров 128 тыс.

50% 1

Learn how to set up your Kreg Project Table and its included cutting guides and measuring systems quickly and easily to get straight, splinter-free, accurate cuts. Here, we take you through it step by step.
--------------------------------------------------------------------------------
Products shown in this video:
ACS3000 Adaptive Cutting System Master Kit
www.kregtool.com/store/c73/sys...
ACS2000 Adaptive Cutting System Saw + Guide Track Kit:
www.kregtool.com/store/c73/sys...
ACS1000 Adaptive Cutting System Project Table Kit
www.kregtool.com/store/c73/sys...
--------------------------------------------------------------------------------
Stay connected with Kreg!
Get Free Project Plans: www.buildsomething.com/
Sign Up for Newsletters: www.kregtool.com/newsletters/
Website: www.kregtool.com/
Facebook: / kregjig
Instagram: / kregjig
Pinterest: / kregtool
Twitter: / kregtoolcompany
LinkedIn: / kreg-tool-company

Хобби

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@christopherdekonstrukt444 2 года назад

One hinge faces out and the other in, correct? I would have been completely lost without this video.

@Brandanscho 2 года назад

This was actually helpful. The instructions included with the ADS are very hard to follow. Kreg should revise them and just use the steps in this video.

@KregToolCompany 2 года назад

We're glad the video was helpful. Thank you for the feedback on the product manual, I will pass that on to our product managers.

@jensenms 2 года назад

Strongly agree - the videos are sooo much better than the manual.

@ionut5316 2 года назад

I find the design of this table to be so much better than the Festool MFT. That hinge system is brilliant. Also, I can buy the top only and permanently install it in my shop. Take my money :)

@KregToolCompany 2 года назад

Glad you like it!

@ronniekotler9265 5 лет назад

RU-vid is a wonderful thing.😀

@gt2scale 5 лет назад

Oaky okay, I really really want one now!

@ronniekotler9265 5 лет назад

My Kreg cutting system came in today Yahoo!

@christopherdekonstrukt444 2 года назад

I bought the table, I would appreciate a QR code in the beginning of the manual to this video, I'm trying to set up the hinges and any way I do it the track becomes offset not straight. You must reference the video as the instruction manual isn't clear enough. If I had a reference to this video I would have saved 45 minutes of confusion. Thank you.

@KregToolCompany 2 года назад

We're glad the video was helpful and will share your feedback with the product team about adding a link to the manual. Thanks!

@michael.schuler 5 лет назад

Crystal clear presentation. I'm a Festool track saw owner, and the design of this Kreg product looks great to me, especially the decision to go with a left-blade saw. Where is the saw itself manufactured, and what are the blade's diameter and arbor size. The corresponding Euro/proprietary specs of the Festool saw trap users into the non-competitive prices their dealers are required to hold. My bet is that this late but carefully developed Kreg entry into the track saw space will be a massive success.

@w4mkh 5 лет назад

Its a 6 1/2" blade. www.kregtool.com/store/c75/accessories-and-parts/p477/adaptive-cutting-system-48-tooth-saw-blade/

@bricebeck9410 2 года назад

Can you get metric rulers?

@RobF48 5 лет назад

In the video you show the track hinge being attached and held in place by one screw on either end. Doesn't that leave the track susceptible to becoming misaligned over time? What keeps the track and hinge aligned? I mean screws can loosen over time.

@millybadison767 5 лет назад

Please make this whole system available at Home Depot!!!!! I will put it on the card tomorrow!!!!!!🤞🏽🤞🏽🤞🏽🤞🏽

@KregToolCompany 5 лет назад

Thanks for your interest! Ship date is March 1 Kreg has established a program that specifically identifies retailers who carry the Adaptive Cutting System and who have the System displayed in their showroom. You can find these Adaptive Cutting System Certified Retailers by using the Adaptive Cutting System Dealer Locator (link coming soon). You can sign up to be notified when it's available to purchase at kregtool.com/AdaptiveCuttingSystem

@ScrewThisGlueThat 5 лет назад

For those of you wanting to buy... Today (2/19/2019) I was able to get hands on with this at WoodCraft in Harrisburg PA... but they are not allowed to sell the units till March 1st. So, just 9 days till you can buy. It's a real nice unit.

@barrywallace5056 5 лет назад

How sturdy was the table

@KregToolCompany 5 лет назад

Hi Robert - thanks for your interest. You can locate retailers in your area at kregtool.com/System

@jonathanhopta3296 2 года назад

Where's the video that shows you how to assemble the project table base?

@KeyserTheRedBeard 2 года назад

neat video Kreg Tool. I broke the thumbs up on your video. Maintain up the superior work.

@KregToolCompany 2 года назад

Thanks for watching!

@jeremyt1917 5 лет назад

This looks awesome! I haven't finished watching the video yet, but is this table and fixture compatible with Festool tracks? I already have a bunch of festool tracks but am looking for a more sturdy "MFT" style table that supports those tracks. If they are compatible, this one looks like a winner for me.

@KregToolCompany 5 лет назад

The Kreg 62" Guide Track is designed to work with the Kreg Plunge Saw, and has not been designed to work with tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does not recommend using the 62" Guide Track with the tracks from other manufacturers.

@RobF48 5 лет назад

Hi Kreg, can the Kreg Precision Miter Gauge system be used on the project table? Seems like it would be easier to set up precise angles using this gauge.

@KregToolCompany 5 лет назад

The project table comes with a Miter Guide that allows you to dial in the exact angle you need for precise angled cuts. Watch the video here to learn more: www.kregtool.com/store/c73/systems/p471/adaptive-cutting-system-master-kit/#video-1

@ehabmobarak 5 лет назад

Kreg Tools, does the miter guide come with the complete system priced at $899.99 on your website? also, what is the estimated time it would be avaialable?

@KregToolCompany 5 лет назад

Yes, that is included. Learn more at www.kregtool.com/store/c73/systems/p471/adaptive-cutting-system-master-kit/ Ship date is March 1. You can sign up at kregtool.com/adaptivecuttingsystem to be notified when it's available to purchase. Thanks for your interest!

@danielwiener2861 3 года назад

I find the hinge mount plate(s) doesn’t slide easily to align the track with the versa stops when calibrating. What am I doing wrong? Thanks.

@brennanbarrett2882 2 года назад

I believe the nuts that slide in the aluminum track gets caught mid turn and jams up. A little tighten/loosen of the T knobs with some shaking should realign them and allow it to slide!

@dannyrichardson475 5 лет назад

Can you use any Kreg clamps with this table? Are there tracks in the edges of the table? Possibility to route out space in the top for a track?

@KregToolCompany 5 лет назад

There are not tracks in the edges of the table and we wouldn't recommend routing out space for a clamp track. You can use the Kreg In-Line Clamp and the Kreg Bench Clamp with Bench Clamp Base in the table easily.

@SteveinJersey1234 3 года назад

Just purchased the ACS from Woodcraft this weekend, and really looking forward to using it. Out of curiosity, is it possible to establish a second location for the guide track hinges along the long length of the table such that the guide track could run perpendicular to the standard position, and thus provide additional flexibility comparable to the Festool MFT? Seems like the only thing one would have to do is cut a small notch out along the edges of the MFT in the desired locations to accomodate the two hinge plates, and of course utilize a shortened guide rail. Is this feasible and has anyone tried this?

@sarahmiranda7130 2 года назад

This is a good idea

@wilfredosworkshop3352 5 лет назад

Will the table work with Makita, Triton, etc. track saws/track? Or will it only work with Kreg's plunge saw? The table is a no brainer purchase for those of us with track saws who want to get a Festool MFT/3-style cutting system without the Festoolish prices and problems.

@KregToolCompany 5 лет назад

Hi there. Thanks for your interest! The Kreg 62" Guide Track is designed to work with the Kreg Plunge Saw, and has not been designed to work with tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does not recommend using the 62" Guide Track with saws from other manufacturers.

@ehabmobarak 5 лет назад

Hello Kreg; I noticed that the ruler lowest reading is 8" , what is the smallest width I can cut using this saw? in other words, can I make cuts less than 8" wide?

@KregToolCompany 5 лет назад

Please contact us at TechnicalSupport@kregtool.com or 800-447-8638 - they will be happy to assist you with this. Thanks!

@161mfd 5 лет назад

Will the table work with existing track saws like the dewalt?

@KregToolCompany 5 лет назад

The Kreg® 62" Guide Track is designed to work with the Kreg® Plunge Saw, and has not been designed to work with saws and tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does not recommend using the 62" Guide Track with the tracks from other manufacturers.

@d3lsl0w 5 лет назад

Does the system work with other track saws? I have the dewalt one.

@KregToolCompany 5 лет назад

The Kreg® 62" Guide Track is designed to work with the Kreg® Plunge Saw, and has not been designed to work with tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does not recommend using the 62" Guide Track with the tracks from other manufacturers.

@d3lsl0w 5 лет назад

Kreg Tool aww, I would definitely have purchased the table but I’m not interested in purchasing a second tracksaw system. You guys missed a huge opportunity here by making the system proprietary. :(

@davidcrandell1172 5 лет назад

Hi Kreg, are these available outside the US?

@KregToolCompany 5 лет назад

Hi David - at this time, U.S. and Canada only. We can ship outside the United States, but shipping fees will apply. You will also have to adapt for metric and the saw with voltage.

@philipdunne3540 5 лет назад

@kregtool what are you actually buying do you get the saw, guide, table and all the bits or just the table

@KregToolCompany 5 лет назад

Learn more about the purchasing options and what's included here: www.kregtool.com/store/c72/adaptive-cutting-system/

@marco3373 5 лет назад

Is there a video on how to assemble it from start to finish?

@KregToolCompany 4 года назад

You can find all videos on the Adaptive Cutting System here: ru-vid.com/group/PLEpqAWFkk9r1Zm5SbU2u7oeOdp43j0STI

@Blumenthalfamily 5 лет назад

Can the Kreg Accu-Cut be attached to the table in the same way as the new track?

@KregToolCompany 5 лет назад

No, the Adaptive Cutting System Plunge Saw is not compatible with the Kreg Accu-Cut™ track. The Accu-Cut track is designed to work with the Universal Sled that accompanies it. The Adaptive Cutting System Plunge Saw is designed to ride directly on the Adaptive Cutting System 62" Guide Track, and is not compatible with the Accu-Cut Universal Sled.

@damnitface77 5 лет назад

Sorry Kreg Tool, that wasn't his question, people want to know if the tracks they already have can be attached to the work table (the raising and lowering function) so they can get away with just buying the table if they already have a track saw rail system they like.

@damnitface77 5 лет назад

It looks like it could attach, as the accu cut does have slot channels on the bottom, but the slots are not centered, so the track would be offset. You would have minimal adjustments to compensate for that.

@KregToolCompany 5 лет назад

The Kreg Project Table is designed to accept and work with the Kreg 62" Guide Track, and has not been designed to accept and work with tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does recommend using the tracks from other manufacturers with the Kreg Project Table.

@felixhueser5219 4 года назад

Is there also a version with metric system for German market?

@KregToolCompany 4 года назад

Technical Support will be happy to help with this. You can reach them at technicalsupport@kregtool.com or toll-free 800-447-8638. Thanks!

@gratefulRed69 4 года назад

what makes the tape measures stay in place once you calibrate them?!

@KregToolCompany 4 года назад

The Adaptive Cutting System is designed to stay calibrated for accurate setups and measurements once set up. If anything ever gets knocked out of adjustment, though, it can be re-calibrated easily. If you ever find that you are unable to maintain or reset calibration of any part of the Adaptive Cutting System, you should contact Kreg.

@purchasing9923 2 года назад

@@KregToolCompany You didn't answer the question. What keeps the measures in place?

@barrydiemer7518 5 лет назад

Will the adaptive table work with a Makita track saw?

@KregToolCompany 5 лет назад

@Khalid.Al-Bahi 5 лет назад

Looks compatible. If not then some little modifications to be done. I'll let you know once I received mine. Although this may take ages because they have to serve the local market first.

@Valmorphanator 2 года назад

Will this work with other track saws

@KregToolCompany 2 года назад

The Kreg Project Table is designed to accept and work with the Kreg 62" Guide Track, and has not been designed to accept and work with tracks from other manufacturers. While it may be possible, Kreg makes no such claims, and does not recommend using the tracks from other manufacturers with the Kreg Project Table.

@JackT9595 5 лет назад

Will this system be available in the UK?

@KregToolCompany 5 лет назад

At this time, U.S. and Canada only.

@billystray7007 5 лет назад

It's about time the states get something first..lol 😉

@TalsaMister 5 лет назад

Where from can I purchase your products in Europe?

@KregToolCompany 5 лет назад

At this time, availability is U.S. and Canada only.

@khansk36 5 лет назад

What is the price for full set up with saw

@KregToolCompany 5 лет назад

You can view pricing here: www.kregtool.com/store/c72/adaptive-cutting-system/

@rustyridenour2136 5 лет назад

Over $400. Dollars

@thomashorner7474 4 года назад

what is the hole spacing on the table

@KregToolCompany 4 года назад

¾" 19mm

@bobd. Год назад

@@KregToolCompany No, 3/4" is the hole diameter. Spacing would be the distance between holes. What is the grid spacing? I searched for the manual and didn't find the hole spacing information in there or on your web site.

@dickydrip 5 лет назад

I’m a 72 yr old retired carpenter and could make any cut that the above offers, better and quicker and for a fraction of the cost. All you need is a pair of saw horses, a sheet of ply to work on, a straight edge and two clamps, game over!