How to setup a Joystick for the Platinum DLC - FS22

Подписаться 89 тыс.

Просмотров 60 тыс.

50% 1

There has been a lot of talk about joysticks and how they can make the new Platinum DLC forestry expansion even more enjoyable. A lot of people have been talking about purchasing a joystick (or two) so hopefully, this simple guide will help you.
For the record, I am using the Thrustmaster T.16000M
www.thrustmaster.com/en-us/pr...
Here's a downloadable PDF of the settings I use too:
mega.nz/file/B4dwSbKA#s7EwZbF...
0:00 - Intro
2:18 - Joystick controls
3:20 - Setting up the joystick
4:21 - The controls in action
7:25 - Keybinds
10:10 - Easy arm controls
12:56 - Other vehicles
14:18 - Outtro and summary
If you want to support the channel you can pre-order the DLC direct from the Giants website using my Giants Partner Code FARMSIMGUY (for PC and works with Giants and Steam versions of the game)
www.farming-simulator.com/dlc...
If you like what you see please give me a sub and like the video, it would be much appreciated.
/ @thefarmsimguy
Come and join the FarmSim Guy Community Discord too
/ discord
I am an official Nitrado Partner. Support the channel, setup a new Nitrado server, using my partner link: www.nitrado-aff.com/24WM49J/D...
Other recent DLC's
Get the Vermeer DLC here: farming-simulator.com/dlc-det...
Pumps and Hoses - farming-simulator.com/dlc-det...
Order Farming Simulator 22 Here - www.farming-simulator.com/buy...
Support modders by not downloading from the mod sharing sites, and always check the mod link you are downloading belongs to the original modder or approved editor. You can access legitimate modders links through the Farming Simulator Mods and Links Discord here: / discord
I am a Game Servers Affiliate, please use the link below to support the channel - www.gameservers.com/?ref=1667023
Become a member of the channel to join the community servers:
/ @thefarmsimguy
Order Farming Simulator 22 Here - www.farming-simulator.com/buy...
Also, check out my new Merch store and pick yourself up a FarmSim Guy T-Shirt or Hoodie.
teespring.com/en-GB/stores/th...
Thanks for dropping by and see you on the farm!
Best place to find FS22 mods
Where To Find New Mods & Mod Testing Lists
Giants ModHub (XB1/PS4) - www.farming-simulator.com/mod...
Giants ModHub (PC/Mac) - www.farming-simulator.com/mod...
New Mods Currently in Testing - Giants Mod Testing Forum - forum.giants-software.com/vie...
PC Specs
AMD Ryzen 7 3700X 8 Core
Nvidia RTX 3070 Founders Edition
Tomahawk MAX B450 Motherboard
Corsair Vengance 32GB RAM
Synology 16TB NAS
Check out my setup tour here: • The FarmSim Guy - Stud...
Check Out Some Other Farming Simulator RU-vidrs Below!
Argsy Gaming - / @argsygaming
Farmer Taz - / @farmertaz
Fusion Simulations - / @fusionsimulations
Mighty Mike Farms - / @mightymikefarms
FarmSim Gamer - / @farmsimgamer
Scroft - / @scroft
Music by:
Epidemic Sound
www.epidemicsound.com/
Artlist - Use my referral link if you sign up artlist.io/Ed-3355611
Evert Z - Stare Down - artlist.io/song/33483/stare-down
How to setup a Thrustmaster T.16000M Joystick for the Platinum DLC - FS22
farming simulator 22 volvo, farming simulator 2022, farming simulator 22, farming simulator, fs22 platinum, platinum edition, volvo fs22, volvo dlc fs22, volvo equipment fs22, farming simulator 22 platinum expansion, farming simulator 22 gameplay, fs22 platinum expansion, platinum expansion, fs22 platinum edition, fs22 platinum dlc, fs22 platinum edition trailer, fs22 platinum edition leak, fs22 platinum edition volvo, The Farmsim guy, fsg, silverrun forest, redwood trees fs22, Thrustmaster T.16000M, Thrustmaster Joystick,
#fs22 #joysticksetup #thefarmsimguy

Игры

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 212

@TheFarmSimGuy Год назад

Getting lots of comments about the mount I’m using for my Joystick, I picked it up on Amazon : DIWANGUS Joystick Desk Mount, amzn.eu/d/4AHSNyi

@_TNJ Год назад

HAVE TO HAVE A SET love Thrustmaster on my second set got hurt in a car wreck and went from 14-hour work days to virtual farming and login way too many hours a day

@dogsdoodahs5183 Год назад

Probably the single most useful,clearest & comprehensive tutorial on setting up a joystick to work on the sim. The downloadable sheet is superb too. Well done mate 👍🚜🇬🇧

@TheFarmSimGuy Год назад

Cheers Dogs appreciate you taking the time to comment 👍👍

@dogsdoodahs5183 Год назад

@@TheFarmSimGuy No problem. I’ve just got in & run through those settings & it’s a genuine game changer for the crane operations,streamlining & smoothing out the movements.

@semperbuffo6067 Год назад

Thanks for the very informative video. I was playing MP yesterday and one player was using two Joysticks and the smoothness of operating the equipment was flawless. Your video and my experience yesterday convince me to invest in Joysticks to really immerse myself in logging with this new expansion. Tks again FSG!

@TheFarmSimGuy Год назад

Glad it helped Semper, have fun with the Joysticks they really do make a big difference!

@Lonewolf23-26 Год назад

Love your settings I was similar but the rotations of the machine were left right switch to the twist of the wrist made a huge difference!

@blackhorsegator06 Год назад

I just purchased a Thrustmaster joystick specifically for this based on your video! I’ll be printing off the cheat sheet you provided! Thanks!

@bravefire3089 Год назад

Excellent tutorial, very clear and concise and having the downloadable PDF is an added bonus. Very well done and thank you👍👍👍

@TheFarmSimGuy Год назад

Thanks Brave, delighted I could be of some help 🙂👍

@sjmagrum5176 Год назад

Thank you so much for this. You are a legend and I love to watch all your shows.

@kanarie93 10 месяцев назад

wow thanks man, that joystick mounts are awsome!!!! I used to play with a 360 controller but dual joystick next to my seat is very nice, resting the arms on comfortable arm rests and using the joysticks is such a joy :D

@TheFarmSimGuy 10 месяцев назад

No problem 👍

@kayakturismo6854 Год назад

I have been using 2 joysticks for all my loaders and forestry needs. works great and more realistic.

@SuperBossen Год назад

I finally got my set of T 16000M joysticks today so now i will try to config. them as you showed. I find this video very usefull, so THX a lot FSG! 👍👍👍

@TheFarmSimGuy Год назад

Have fun

@ricardo_1989 8 месяцев назад

hey do they work properly for logging ? i have mine since 2 days but not all the joystick stuff that i binded works

@Oldcranky1 Год назад

Thanks FSG, great tutorial. Crib sheet downloaded and will set it up.

@JosModding Год назад

Second joystick is now in the cabinet, thanks for the guide!

@TheFarmSimGuy Год назад

Haha nice!

@oliversvanda Год назад

Yessssss FSG, thank you! Keep killin it with the livestreams

@TheFarmSimGuy Год назад

Thanks Oliver!

@AlexGtheOG90 Год назад

Thanks Bro! Finally got my joystick working with forestry equipment!

@TheFarmSimGuy Год назад

Nice 👍

@DanTheMonkey Год назад

Giants really need to get console players access to this kinda material, we are stuck with controllers, it would be so much nicer to be able to use a keyboard or joystick, or at least be able to change up the keybindings.

@TheFarmSimGuy Год назад

I’m not sure if it’s a console or game limitation that’s stopping keyboard and mouse being plugged in

@DanTheMonkey Год назад

@@TheFarmSimGuy here's one for you FSG, did you know that if you reset the wheel loader, dumper and forklift back to the store on silverrun, then you can quick tab into them.

@Hellown Год назад

@@TheFarmSimGuy it's definitely how the games are made (in regards to Xbox at least). Keyboard/mouse works on the console and in some games.

@thijmenvanbarneveld6823 Год назад

Thrustmaster launched a new tca stick airbus branded compatible with xbox. I would bet that stick can work with the xbox version of the game

@crossbowhunter9118 Год назад

You would not want to use a mouse for that kind of machine it is not easy. A lot of pc players use a controller for a Xbox but on pc. I prefer a wheel that is my favorite thing to use in driving games and farm sim I play on pc the amount of money you spend on a Xbox or play station. You could buy a pc for the same price

@uncle_zlivo Год назад

Great guide thanks, been thinking about replacing my ancient Logitech (it's older than most of my family) for a long time so I just ordered the DUO set. Honestly you should get a share from those sales mate, best promo Thrustmaster can get. :)

@TheFarmSimGuy Год назад

Hah, thanks, I’m just happy to share the info. The dual set is a great buy, I need to rework my gaming space to include my second. You won’t regret it 😊👍

@jandecoleman1 Год назад

FSG, your lucky I live across the pond, else I would find your home and picket you until you release the next episode of Surviving Wyoming!

@TheFarmSimGuy Год назад

Haha! I'm very lucky, it's coming, I just don't want to rush it and not be happy with it!

@leonardfpv Год назад

Thanks a lot for your this tutorial! Please to a video on setting two joystickst up as well! Another fantastic downloadable sheet with your preferred settings would be fantastic for that as well! :)

@TheFarmSimGuy Год назад

I don’t have two setup at the moment, but that’s the plan

@peterclarke3300 Год назад

Great video on setting up a joystick FSG but I don’t think the misses would be very happy with me mounting a joystick to the arm of the sofa 😂😂 keep up with the great videos 👏👏👍👍⭐️⭐️⭐️⭐️⭐️

@TheFarmSimGuy Год назад

Haha that's fair enough Peter!

@jandecoleman1 Год назад

Aldo, my wife said no to mounting a steering wheel to the sofa as well. No armchair driving rig for me.😪

@drizz786 Год назад

And again top work lad, i have a wee addition i use a hotas and found that you can use a button , say trigger, as a modifier which now lets you asign your axis again so almost doubling your controls , trigger ➕️ axis is seen as different from axis alone. Hope that made sense. Trucking calls so ttfn

@MarkThor_11 Год назад

Yep, think I need to set my duals up and give it a go

@Druac Год назад

Finally got a joy stick...still need to set it up...but the main reason I want to use one is for other implements...like bucket manipulation on a wheel loader or bale handling with forks...etc. Not much into farming trees :)

@Sapper_DJ Год назад

Nice video mines set up very similar but I extend using the d up and down as I use the same to extend on telehandlers

@ninjayx0245 Год назад

Very informative FSG. I've used an xbox controller as a pair of joysticks for cranes and excavators. I use a wheel and pedals ingame so the xbox controller is not used for driving

@TheFarmSimGuy Год назад

Nice! soounds like a good setup

@rustygoldworkshop4672 Год назад

Thank you awesome tutorial.

@TheFarmSimGuy Год назад

You are welcome! 👍

@rustygoldworkshop4672 Год назад

Thank you awesome tutorial👍👍

@TheFarmSimGuy Год назад

You are welcome 👍

@MothBird Год назад

Dual joystick setup video please!!! I saw in your room tour you have both hooked up! I just got the two joystick set for Christmas

@TheFarmSimGuy Год назад

All in good time

@PunkrockDude86 Год назад

Thank you so much for this video FSG! Very helpfull! i even bought the T16000 to upgrade my old Thrustmaster Basic Joystick, The Basic worked perfect! but i felt like i missed some buttons/options with the Platinum DLC. when you showed the 'Rotate Vehicle' by turning left/right of the stick itself i was already sold! and then there are even 12 more buttons on the base! Little problem tho.. Can't figure out how to turn off the slidy button in de middle of the base.. it keeps scrolling automaticly through my map =p Do you or anyone know how to fix this? Love the channel btw. been following for a long time now, love the stories and the in depth but easy to understand tutorials. Keep them videos coming! Much love from The Netherlands!

@Steel_horse_oz Год назад

Very helpful Thanks. Think I need to graduate from the keyboard.

@stevetam2030 Год назад

Got a thurstmaster TCA for flight sim. Hopefully i can set up the same using this guide.

@TheFarmSimGuy Год назад

Hope it works Steve

@StimulationSimulated Год назад

your a star man .. thanks so much for this

@TheFarmSimGuy Год назад

You're welcome! 😊👍

@matthicks79 Год назад

Thanks this really helped 👏

@TheFarmSimGuy Год назад

My pleasure Matt 👍

@Ryan-re1rs Год назад

I use a t248 wheel and it's pre mapped to this game, but the mapping buttons are named like rs2 + a to do something. My wheel is a pc ps5 wheel and doesn't have the letter A! Anyone know if giants made a key map so I know what they mean with their own named buttons?

@Titanfour6 Год назад

I tried this before but found it easier with two joysticks... Even better if you have the time to set them up similar to SAE controls like real life machines, if your happy to do the setup it would make for a good video 👌🏼

@ricardo_1989 8 месяцев назад

hey do u use the 1600m duo joysticks? i cant get mine to do everything on farm s im.

@Titanfour6 8 месяцев назад

@@ricardo_1989 t.16000m, and have you tried the settings page on the main menu, there's an "allowed inputs" kinda option make sure game controllers is allowed of your own pc, if your on console... However i don't know if you can get two joysticks to work

@ricardo_1989 8 месяцев назад

@@Titanfour6 how do i allow them

@Titanfour6 8 месяцев назад

@@ricardo_1989 just make sure that game controllers setting is turned on in main menu settings

@ricardo_1989 8 месяцев назад

@@Titanfour6 yeah tried that plus alot ofother stuff like reinstalling , deleting game.xml and edit it

@dlanter58 Год назад

Informative, thanks. Will the camera automatically track when rotating the excavator or is that another setting?

@TheFarmSimGuy Год назад

It should track automatically, I didn;t change any view settings

@pyrotekgaming2119 Год назад

I want to run a dual stick setup for mining and logging, Looking at the Trustmaster T16000 Space Duo

@nomnomcookiez5116 Год назад

Fsg the automatic cutting is only for the delimbing the tree you probebly press to long or twice the machine normaly not start right away delimbing

@dirkmanderin Год назад

I have both the Saitek X-56 and Side Panel, but find trying to remember all the button mapping to be a major pain.

@3verland Год назад

I use a Logitech 923, and the Saitek heavy equipment side panel, but I have a Logitech Extreme 3D Pro Joystick sitting on the shelf unused, I thought about adding a 2nd joystick for logging. My PC desk is smaller, my I please ask what brand / model of mount you have clamped onto your desk supporting your joystick, TY, keep of the great work.

@TheFarmSimGuy Год назад

Hi Kendall, first pinned comment should be a link to the mount 👍

@th3tok3nblackguy Год назад

I'm having an issue when I'm in a vehicle with tracks. Whenever I turn my steering wheel left or right, the said vehicles will start to spin around automatically. Is that the result of easy arm controls as well?

@mrakomo Год назад

It is great you managed to make a working configuration. I spent two days trying to configure my Thrustmaster t300 steering wheel and failed miserably. While in Eurotruck simulator it is a game changer, in FS22 the force feedback does not work, it is not possible to map the keys to anything meaningful (the game tries to map it as a standard PS4 controller, which results in completely ridiculous key combinations for the simple tasks, such as shifting gears, or using blinker). If you use a steering wheel with FS22, it would be a really interesting to see a similar episode how you managed to set it in some meaningful way.

@TheFarmSimGuy Год назад

Thanks mrackomo, I had the same issue as you, so I've pretty much ignored the buttons on my wheel, it's literally there to steer left and right now. Out of interest have you ever tried Sim Dashboard, I make quite a few screens for it, which has been a real game changer for me. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mCfMcKTZbxE.html

@mrakomo Год назад

@@TheFarmSimGuy No, I didn't know this one. But thank you for the tip. I will for sure have a look at your suggestion.

@valaksimulations4503 Год назад

Well I have plenty of joysticks from my dcs, il2, etc flying. I setup my Logitech x56 stick and mapped it but I jump in game and it doesn’t work. Does farm sim not recognize certain items that you are aware of? Don’t worry I just sorted it out. One other thing is to make sure you have joysticks and steering wheels turned on lol. Now it works great!

@jonas9647 Год назад

Hey thanks for the video! If possible what desk mount do you use for the joystick? Looking for one currently.

@TheFarmSimGuy Год назад

Just added it as a pinned comment Jonas a few people have asked 👍

@JamieAyling Год назад

Can you rotate the cutter head once a tree is attached for cutting? Would make stacking log piles much easier.

@TheFarmSimGuy Год назад

Yes but in some cases the weight of the tree will stop it turning

@fionawillstead7141 Год назад

Awesome I run dual joystick and the updates loosing th key binding is a pain in the arse

@crofter Год назад

Good video fsg I was wondering why I didn't have the green band for the new easy cut function in my game its because I have easy arm controls setting off since before the dlc🤘

@TheFarmSimGuy Год назад

No problem 👍

@farmert7959 Год назад

Great video! Thanks for the tutorial. I do have a question. I am on PC, I use G29 wheel, the FS side panel and an Xbox controller. Can I add the joy stick to the game set up? Just curious if the game will allow another unit. Thanks for your help! 😃

@TheFarmSimGuy Год назад

Yes I run a PS4 controller, Wheel, pedals, button box, joystick, Sim dashboard and all work fine. (I had 2x wheels connected at one point because my Fanatec wheel and pedals were also connected for Sim racing)

@emmettburns7586 Год назад

Nice video. Maybe I missed it but I didn’t see how you mapped the “cut” button or anything about maybe using it with drive controls? Like possible using the 4 top buttons as “modifiers” like the Lb/rb buttons on a controller the left/right mouse buttons?

@TheFarmSimGuy Год назад

The default for the cut button was X, so I just added in the top button on the joystick as an extra keybind

@DisorderlyDriver69 Год назад

Nice video! I'm looking into getting a joystick myself, likely the one in this video. Do you know of any good desk mounts?

@TheFarmSimGuy Год назад

I just picked on up from Amazon yesterday, you are spoilt for choice there

@TheFarmSimGuy Год назад

Just added mine as a pinned post a few people have asked

@DisorderlyDriver69 Год назад

@@TheFarmSimGuy Thanks!

@s5059760 9 месяцев назад

Great tutorial, thanks! I think I found a mistake on your spreadsheet.. controls 5 & 6 are also on the Y axis just like 3 & 4, I think they should be on the X. please correct me if wrong 😁

@TheFarmSimGuy 9 месяцев назад

Ooh I’ll check, thanks for pointing it out 👍

@pcplayermalc Год назад

Couldn't see it in the comments, but what is the movement for the button assigned as X in the gamepad settings? On Xbox controller it's LB+A but I can't even find that in the list other than Vehicle : Tool Function 2. I tried setting it as that but the tree still doesn't cut with that joystick button.

@dogsdoodahs5183 Год назад

That’s tool function 2 isn’t it? I made it the trigger & made tool function 1 the stick side switch (kind of where the thumb rests on mine),this switches on a tool like a cutter & then i use the trigger to make the cut.

@pcplayermalc Год назад

@@dogsdoodahs5183 I assigned the button to tool function 2 and it does nothing. But LB+A does cut

@str8upn0l1fe6 Год назад

Hey i know this is a older video i got t16000m dual sticks is there anyway to use one for driving and other for arm controls.

@TheFarmSimGuy Год назад

Yes primarily your left stack will be predominantly for driving, just set it up as you wish in keybinds 👍

@str8upn0l1fe6 Год назад

@@TheFarmSimGuy thx this video helped alot

@ingograntsau1922 Год назад

Nice video! I have de saame joystick as you, but I have an issue. Every time I touch the stick, the camera goes to top down view and theres is no way to rotate to another position (using the mouse) because it returns to top down view. Do you have any clue what I'm doing wrong? I don't have experience in settings and I'm having trouble finding the problem. Thank you!

@TheFarmSimGuy Год назад

Sounds like the slider at the back of the joystick is connected to your camera keybinds, try sliding it and see if it stops and then you can disable it in you bindings

@ingograntsau1922 Год назад

@@TheFarmSimGuy Yes, what is causing this is the slider. Since I only have the joystick as a controller, I got lost in the middle of so many default bindings. Thank you for your help and greetings from Brazil!

@ironwolf535 Год назад

What keybind do I need to change to cut the tree down and cut it to the length?

@TheFarmSimGuy Год назад

It should tell you in the F1 menu the key to adjust the length of the tree

@3verland Год назад

Before adding my Logitech 3D Extreme Pro joystick, I had a G923 wheel/pedals, and the Saitek heavy equipment side panel. I backed up my input binding file, unfortunately as soon as I launched 22, my joystick took over every free spot that was not being use by my wheel or side panel, something FS has always done, and I do not like, you should get pop-up window with a yes to proceed or cancel. I had to go through the gamepad section and remove 20+ controls that FS forced the joystick into. BTW, as soon as the map open I was staring at my feet, it was stuck there, after removing all joystick slots that problem was fixed. I added my joystick to certain parts of the crane, player interactive and vehicle areas to control the cut for tree harvesters, and the movement for the part of the Hannibal's boom control that grabs the tree. When I was fished, it all worked well, and I was able to zip through trees at a fast rate. But...the 1st time I hit Esc to open the PDA map view, the map is now stuck in a scrolling / panning down, always moving to the bottom of the map. KB binds where not messed with at all, I looked through all the settings, and the only way I could find to pan the map down was with the LMB drag down and the "S" key. I went through every slot under gamepad section, and I could not find where my joystick or other controllers had any access the panning the map. It like the game is getting its wires crossed, and send an erroneous signal for one of my peripherals.

@TheFarmSimGuy Год назад

Do you have a slider, throttle type control on your joystick? That’s probably linked to your camera, I had the same issue with my thrustmaster, then you can revert back to your mouse for panning around 👍

@3verland Год назад

@@TheFarmSimGuy My Logitech has a throttle that is similar to yours, has a tab sticking up that rotates a pot backwards and forwards. Your the Man, that was it, I was able to rotate it to the middle position, and get my map to stay dead-still. I can't see any place where my throttle on the joystick shows up in a slot on the KB or the gamepad section, this is kind of weird. Reply

@andresfranz2597 2 месяца назад

hey, i got the same joystick. And when i plug it into the USB it takes over controll of my view wich i control with my mouse actually. how can i fix that ?. i didnt foung a way to delete setting wich come up automaticly ? Cheers for help Lads

@TheFarmSimGuy 2 месяца назад

It’s the order you plug them in, you can also add keybinds back in. Try resetting your keybinds too with both plugged in and then tailor them to your liking after that 👍

@3verland Год назад

Maybe you could do me a favor, I've run into an issue on Silverrun, it appears my productions are broke, as in they stopped producing. From the beginning I had the mod active "Production Revamp v1.3.5.1", all my productions were working, but the old sawmill seemed really slow at producing anything. I removed the Revamp mod thinking it might not be working with the game's latest update. This only made matters worse, now, none of my productions I own are producing anything, no steel from furnace, and zero, zip from the sawmill, and several hours of gameplay have gone by. Just wondering if anyone else has or are running the Revamp mod on Silverrun. BTW, what's up with that sawmill having a tiny spawn area that looks to only support (1) pallet.

@techforthedisabled9514 Год назад

Thank you Sir

@TheFarmSimGuy Год назад

My pleasure Tech 👍

@stevesmith6528 Год назад

Can’t wait to get mine just waiting now question what map is this?

@TheFarmSimGuy Год назад

This is the Platinum expansion map Silverrun forest

@guuustavp0929 25 дней назад

what controls do you use for allthe othrs

@scottmalbon9875 8 месяцев назад

how come my main camera constantly moves to the dirt? i cant do anything. ive changed settings and nothing seems to be helping me.

@TheFarmSimGuy 8 месяцев назад

Your slider is doing that, just remove that keybind

@roald3575 2 месяца назад

do you have an terra farm excavator joystick setup to? :)

@Raptor-nk9qd Год назад

How do I fix this when I try to steer with my g920 on pc the wheels like barely move and I can’t steer

@TheFarmSimGuy Год назад

Sounds like your range is wrong check it’s set to 900 degrees in the main menu settings or in Logitech Ghub

@landonmauldin2778 Год назад

Man I wish I could get dual joy sticks for a Xbox. I run equipment for a living and not being able to use the controls how they are on here drives me crazy. I never struggle in real life with these. Plus it would keep the kids off my real ones 🤣.

@wodnys9021 7 месяцев назад

Can someone tell me which folder to put this PDF file into?

@TheFarmSimGuy 7 месяцев назад

Any one you want, it’s just a reference sheet nothing to do with the game, you have to do that yourself in the keybinds menu

@alexbellows1919 Год назад

The arm closes to the machine is the boom, and the one farthest away is the stick

@panteret Год назад

trying to find the command for cutting the trees. so i can find what button to use on my joystick. or the X button you used. what is that command please fsg?

@TheFarmSimGuy Год назад

It was already set for me Pete, but I think it’s just called Cut Tree in the general settings

@panteret Год назад

@@TheFarmSimGuy tx, found it after looking for the X button. turned out it is called tool function 2. took a few hours to find that out. lol

@josephanderson3451 Год назад

Good day! It looks like you have some experience with Thrustmaster! I am not able to get the force feedback to work on my Thrustmaster TMX wheel in Farming Simulator. I can turn on auto centering in windows settings for the wheel itself, but there are no forces or auto centering through the game. Do you know anyone that has been able to use one of these wheels the way it’s meant to be used in FS? Also, what wheel do you use? Thanks!

@TheFarmSimGuy Год назад

Hi, I'm afraid I don;t have any experience with Thrustmaster wheels, I use the Logitech G920 wheel and pedals at the moment

@josephanderson3451 Год назад

@@TheFarmSimGuy ok, does force feedback and vibration effects work with the Logitech system you have?

@27hund1 3 месяца назад

Hello from the future.. I have gone and bought the new TM farmstick.. It says that it is all set up for FS22.. I hope so, i am yet to test it out.. growing some trees to find out. keen to do more forestry as i have not done much in the past.. makes a change from cows and grass.

@TheFarmSimGuy 3 месяца назад

Nice, enjoy it 😊 this should help ts.thrustmaster.com/download/pictures/PCMAC/Farmstick/Mapping-Farmstick_FarmingSimulator22-PnP.png

@27hund1 3 месяца назад

@@TheFarmSimGuy Yes it will. Bookmarked that. Thank heaps.

@Erik-bf9uf Год назад

Hi I was wondering what dead zone and sensitivity settings you use?

@TheFarmSimGuy Год назад

Kept my sensitivity at 100% dead one at 5% 👍

@JustinTurner000 Год назад

sorry to sound like a noob ahah, what function is the cut and how did you set it to a different button i have the same joystick, just cant figure out the cut other then using my keyboard still

@TheFarmSimGuy Год назад

Just bind they key on your keyboard to the joystick, so if the key is X for cut, find that in your keybinds and add your preferred button on your joystick 👍

@XloserguyX 3 месяца назад

Ok I got one question how do I bind a button to cut the tree?

@TheFarmSimGuy 3 месяца назад

In the keybinds find the cut option and assign a key to it (by default it’s X I believe)

@hawks2838 Год назад

i am not getting the target on the tree. what setting do i need on? my auto alignment is not working even though i have it turned on. Any help please

@hawks2838 Год назад

also what harvester is that one?

@TheFarmSimGuy Год назад

Easy arm control needs to be turned on

@morganbisley886 Год назад

Thanks for this video. Would the joystick work along side an Xbox controller? (On PC)

@TheFarmSimGuy Год назад

Yes. I have a PS4 controller connected to my PC too

@morganbisley886 Год назад

@@TheFarmSimGuy ahh fantastic. my velocity flight stick is in the post

@Bauer-Mayer559 Год назад

Hi, your video helped me a lot to adjust my joystick thanks for that. But when I wanted to buy some land after setting it, I noticed that the map automatically scrolls up and even if I align the map down, it scrolls up again. Do you have the same problem? And sorry for the english it's bad😀

@TheFarmSimGuy Год назад

Yes you will have a slider or throttle control on the joystick, remove that from your keybinds (move it up and down and you will see it slow or stop on the map

@Bauer-Mayer559 Год назад

@@TheFarmSimGuy ah ok thank you 🙂

@the_watsons2191 Год назад

Does this joystick work for lefties too? Or do I need a different model

@TheFarmSimGuy Год назад

You can buy left or right handed versions

@agame7876 Год назад

In fact one fits for both, it comes with two rubber pieces for lefties and that palm rest (or whatever its called) can be rotated after you loosen the screws on it. Im not a leftie but just got mine yesterday. 😄

@markcottingham1546 Год назад

Hi FSG is it just the joystick that's needed or do you need the throttle aswell thank you.

@TheFarmSimGuy Год назад

No throttle needed Mark 👍

@markcottingham1546 Год назад

@@TheFarmSimGuy thank you

@followDeq Год назад

Where can I buy a stick stand like yours?

@TheFarmSimGuy Год назад

You can pick them up on Amazon, look for HOTAS desk mount

@freedom57 Год назад

for some reason i cant get any of the keys to cut tools anything i try it dont work

@TheFarmSimGuy Год назад

Have you set them up in the keybinds?

@dmac8831 Год назад

Great video however I have the same joystick and have followed your video step by step and no matter what I do it just does not work I go 1 step at a time and save all the way down the list and just can not get it to work show all the correct buttons

@Squishy0banana Год назад

neat

@_TNJ Год назад

love your content. when u go to two sticks cheak out FDR vid out on setting up two joy sticks

@TheFarmSimGuy Год назад

Yeah I know the FDR guys stuff really excellent

@nicholasmcinnis8413 Год назад

FSG you can look up FS Miner he has one or both joysticks for a set up

@TheFarmSimGuy Год назад

Yeah I’ve tried them before

@eng_rodrigo_vogel 7 месяцев назад

Você utiliza algum pedal para movimentação da máquina?

@TheFarmSimGuy 7 месяцев назад

seus pedais ainda funcionarão para movimentos para frente e para trás

@eng_rodrigo_vogel 7 месяцев назад

@@TheFarmSimGuy I think I expressed myself wrongly; I mean, do you use some kind of pedal like the THRUSTMASTER GAME TFRP RUDDER pedal to move the tracks back and forth?

@TheFarmSimGuy 7 месяцев назад

@@eng_rodrigo_vogel Ah OK, no just standard pedals (I use a T248 Thrustamaster wheel too)

@rafterwranch6395 Год назад

Can i use it for front loaders on xbox??

@TheFarmSimGuy Год назад

I'm not sure of joystiuck compatibility with console I'm afradi, best to check with the manufacturer of the joystick

@bryanbrewer4272 Год назад

oh snap!

@jerrywise1572 Год назад

THE TRACKS MOVE WIDER ON THIS ONE BUT I HAVE NOT FOUND THE BINDINGS AS OF YET. sorry for the caps

@TheFarmSimGuy Год назад

there are two options to switch too on teh vehicle, if press G you can switch between them (there is a small 1 and 2 above the icon in the top left corner) then you need to hold your left (or right) mouse button down (sorry not at my gaming PC to check) and move the mouse left and right to extend them.

@jerrywise1572 Год назад

@@TheFarmSimGuy tyvm. never ever would I find that

@spaghetti9845 Год назад

it recognizes my stick and commands but does nothing

@Crayon255 8 месяцев назад

Would this work on construction simulator on xbox?

@TheFarmSimGuy 8 месяцев назад

No I think this a PC only peripheral

@Crayon255 8 месяцев назад

@@TheFarmSimGuy that sucks

@pasityyska9618 Год назад

these settings are easy but the problem is how its affecting on other controls as well, like view

@TheFarmSimGuy Год назад

By default when you plug in the joystick, it adds view controls, I just delete these so there aren't any clashes

@pasityyska9618 Год назад

@@TheFarmSimGuy yeps..dumm me

@TheFarmSimGuy Год назад

@@pasityyska9618 You're good man, glad you got it sorted!

@darktech4015 Год назад

Good info but missing a few things, you did not show the binding to cut etc. These menu settings for fs22 are terrible. Don't know why they can't make a binding section for each tool type. Would be so much easier if it just said like logging tools then all the controls associated

@TheFarmSimGuy Год назад

The binding to cut I didn't change from the default that's already set up which is X

@weavercattlecompany Год назад

You buy two Logitech G Extreme 3D PRO Joysticks ($30 per stick) for what that one Thrustmaster T.16000M cost and still have some spending money left over 😉 Here's a desk mount for it ... "Hikig The Desk Mount Compatible with Logitech G Extreme 3D Pro Joystick" ($30) Of course, if you're a welder/machinist, you can easily make your own from scratch for much less 😁

@kickballmusic 7 месяцев назад

Are these mods? And if so which ones?

@TheFarmSimGuy 7 месяцев назад

The mods in game are part of the platinum expansion that was released last year

@kickballmusic 7 месяцев назад

@@TheFarmSimGuy alright

@immortalKE. 11 дней назад

Does this work on ps5?

@TheFarmSimGuy 11 дней назад

No just PC

@fayeu4546 Год назад

work in console?

@TheFarmSimGuy Год назад

It should do, the joystick is compatible

@chads3308 Год назад

What about on xbox

@TheFarmSimGuy Год назад

If you have a compatible joystick yes

@marektoja283 Год назад

Whether such machines must be 2 joysticks, otherwise it does not make sense

@TheFarmSimGuy Год назад

I did this for people who only have access to 1 joystick

@Jayhawk226 Год назад

One of these days you'll release a bad video. Today is not that day.

@TheFarmSimGuy Год назад

Thanks Jay 😊👍

@patu5798 3 дня назад

Don’t waste your time with this. Find a couple of cheap joysticks on market place or something. You need 2!

@TheFarmSimGuy 3 дня назад

No you don't

@DarthHorlicks Год назад

Thank you for the walk trough on how to set controls for the Thrustmaster T.16000M, I ordered one yesterday and got it today, been messing with a few controls on it, but I couldn't get the buttons to work how I wanted them. This will help me alot :D

@TheFarmSimGuy Год назад

Great stuff Richard glad I could be of some help 👍