How To Setup a KegLand Series 4 Kegerator 

New fridge looks great! Man, those push fittings make it soooo much easier!!

Why would you not mention putting the steel ring over the tap tower.... I just put it all together to realise the ring wasn't on it and I had to take it all apart and start again!!!!!

Hey this is a great instructional video, I wish I had of watched it before setting my keg king up. (I made many mistakes).

Very detailed, thanks. I’m setting up the X tomorrow. I assume it’s relatively the same… cheers from the US!

Thanks for the informative video man. that's such great help

Thanks for the instructional , really think that $1 auto shut spring could have been thrown in with the kit or maybe send a bag to your top buyers and sellers and at least let them chuck us a free spring for the middle tap just to be nice , sharing is careing.

With setting up multiple lines with the T piece. Will gas leak out of the other connections if say you set up for a 3 font tap system but only had one keg onfor now. Or do the ball lock fittings stop the gas from leaking out when connected. Hope this makes sense. Just setting mine up and I'm unsure

What an amazing product! And thankks for your great presentaion of it! Can I place the gas bottle inside?

Thanks very informative.

What Great vid , Thank you , well done and thank you for your time to make the vids

Great video

Would be great if you mentioned putting the dress ring on the font before putting it all together😁

Those duotight compatible short shanks are GAME CHANGING! I've been out brewing for a few years, but this was number one on my wishlist of products back when I was kegging regularly. Are they compatible with most taps, or just intertap/nukatap? I have some existing perlicks from way back, but these new generation nukataps look very tempting to upgrade to....

FUCK!!! WHY DIDNT I WATCH THIS VIDEO EARLIER!?!”!?!” I FUCKED UP MY KEGARATOR.

Thanks for the very informative video!! I was considering making my own keggerator with an old mini fridge and ikegger parts, would end up costing a bit less but I'd be working with 10 litre kegs, im gonna save up for a series X, I think, now. Quick question though, what if I were to have a home bar and wanted to install the series X into the bar, can I install the font on top of the wooden bar? I'll have a door big enough in the bar so I can open the keggerator door, also is it possible to have the regulator and gas bottle in the fridge or next to the fridge it will be flush against the wall. It will be a self serve bar, not one like at a pub. Cheers 🍻🍻

How to you release the pressure from the keg side if there is no pressure release valve on the keg, also should there be pressure in the keg before it even gets hooked up? Cheers

I'm looking to do a DIY rig similar to this, but looking to design a Venturi inline dosing, so I can use post mix syrup or any other syrup in a suitable container so I can get cola on tap or any other sweet drink.

The build quality looks great. I would suggest you check prior to purchasing whether it does come with the new connectors or the old barb ones. I purchased mine early sept 2019 so was disappointed to find it came with the old barbed fittings. Given the video states new fittings are provided from 2019 I also think this is misleading. Had I known how difficult and frustrating it is to attach 4mm beer line supplied to the barbed fittings I honestly don’t think I would have purchased the unit at all. Several days on looking at upgrading to new improved fittings. But despite KegLand selling extensively in New Zealand no one seems to stock these new tap upgraded shanks and KegLand Australia while they have them in stock don’t ship outside Australia. On KegLands own site in the description of the new fittings it makes reference to how difficult the previous barbed fittings were. I chose the KegLands kegerator after a lot of research however missed this issue which is stopping me having a working kegerator at present.

also, apart from echoing the steel ring tap tower comment ... an AV suggestion - watch that white balance on the camera, I'd switch it to manual :)

How do you attach the gas manifolds? I've got a dual tower setup with a dual primary regulator leading to two manifolds. I need to attach the manifolds but two-faced tape doesn't stick to the aluminum manifold. I'm leery to screw into the wall or ceiling of the kegerator, but it's also a pain in the arse having all my gas lines flop around. Should I screw? And where should I screw if indeed I should screw? And what screws should I screw with if I need to screw?

I currently both homebrew beer and ginger beer (the non alchoholic kind) and am getting tired of the bottling tedium. If I wanted to start kegging and set up a kegerator, could I dispense the gingerbeer from the keg using the same pressure line as the beer? or would it need to be a different pressure / not pressurized at all?

Hi Kegland I have purchased this and I used the maximum of beer line I received with the kit. I did the water test and am getting over 500ml in 10 sec. When I did the water test I had the keg pressurised at pouring pressure, was I supposed to do this or did I not need to connect the gas at all?

Great video.

Hi I’ve just purchased the one tap version have it all set up but I’m getting beer shooting up my gas line please help

I'm a little confused about the fermenter part of it. It says the temp range of this is 23-82°F. Does this have a built in heater inside of it to get to those warmer temps?

Where did I get the tap shank and outside attachment mounted on beer tower?

Doesnit matter where the fan is placed inside the fridge to circulate the air?

I bought a 8mm - 6.5mm duotight connector, but my 6.5mm definitely doesn't fit down on the faucet barb like you show. Am I doing something wrong?

Damita

why doe my temperature not go above 5

audacity again - fix that volume champ. great info but need to be a dog to hear it

а по русски

audio quality was really terrible

too much work