How to Setup and Program ESP32 Microcontroller- Complete Guide

Подписаться 38 тыс.

Просмотров 130 тыс.

50% 1

Let’s learn how to Setup and Program ESP32 Microcontroller using Arduino IDE. We’ll connect ESP32 Dev Kit with computer using USB cable. And then install ESP32 board support in Arduino software. This will let us select ESP32 WROOM Microcontroller in Arduino IDE. Finally, we’ll upload Arduino program to blink LED. The ESP32 board has built-in LED connected to IO2 Pin.
[SUPPORT]
►► Try the world's most trusted PCB design software, Altium Designer with 365, for free and 25% off your purchase: www.altium.com/yt/binaryupdates
►► Free search engine for the best quality components from Octopart: octopart.com/
[RESOURCES]
►► Need Help? To Learn Embedded Systems: courses.binaryupdates.com
►► Software Packages: dl.espressif.com/dl/package_e...
►► Install ESP32 Boards: raw.githubusercontent.com/esp...
[TIMESTAMPS]
00:00 Introduction
00:20 ESP-32 Introduction
00:40 Connect ESP32 Module
01:30 Add support of ESP32 Boards
03:14 Install ESP32 Board in Arduino
05.16 Program and Upload Code
05:49 LED Blinking of ESP32 Module
06:55 Change delay of LED blink
07:52 outro

Наука

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@Lilith_212 Год назад

Thank you so much you absolutely saved my grade! I could not get my ESP32 to connect no matter what I tried and this was the only video that went in depth enough to help me solve the problem.

@BINARYUPDATES Год назад

Hi Lena, I'm glad to know finally you can program your ESP32 Development Board. I'll be posting more videos about ESP32 programming and projects. Thanks for your wonderful words. Good luck and best wishes!

@mananjarsania9328 4 месяца назад

Super. Explained from scratch. Thanks.😊

@jwmcneelyIII 7 месяцев назад

This is very helpful. It sure would be nice if you would copy those urls and paste them into the description so we could copy and paste them instead of trying to read them in the video stream. The resolution is not so great.

@akankshyapattanayak8497 Год назад

Thanks bro !! So much for this vedio.

@Bu7aamed199 11 месяцев назад

Thank you very much for this tutorial !

@BINARYUPDATES 11 месяцев назад

Hi Aamed, Glad it was helpful! Hope I'll get time this year to make more videos on ESP32 Microcontroller programming. Wish you good luck and best wishes!

@jabaljoshi7343 26 дней назад

Very Nice tutorial, Explain everything

@ajriyaluthfi8720 2 месяца назад

thank you sir🙏, u saving my life

@AlexFreemanOfficial Месяц назад

Thanks for the video. Very simple, concise and clear. Helped me a lot. 🙌🙏

@BINARYUPDATES 28 дней назад

Hi Alex, I'm glad it helped!

@mariapaulajimenezjaramillo9210 Год назад

I really like your video, thank you so much, I will check your others videos! :)

@BINARYUPDATES Год назад

Hi Maria, Glad you like them Best wishes!

@baresaint 3 месяца назад

So good! Thanks. You helped me a lot.

@BINARYUPDATES 3 месяца назад

Hi Baresaint, Glad to hear it!

@sarath6535 2 месяца назад

Very nicely explained, appreciate your effort to sharing the Knowledge.

@BINARYUPDATES 2 месяца назад

Hi Sarath, thank you so much!

@herebest4612 29 дней назад

Thanks thalaiva

@HollyHertig Месяц назад

very nice!

@alireza0994 4 месяца назад

Thanks brother. it helped me a lot. ♥♥

@BINARYUPDATES 4 месяца назад

Glad to hear that this ESP32 Programming lesson was useful to you. Best wishes!

@JusSingh 5 месяцев назад

i got i working for first time lol. i watched other tutorial they are asking to connect resistors(hell of connections to do) and that never worked. as beginner, this is straight forward no complicated connections. its like my first python code(print("Hello world")) Thank you soooo much.

@edgarlepiten2883 Год назад

Thanks for the tutorial. Was wondering if you have a video having an input pin configured and an output as well. Like for an example, if you press a button, LED will turn on.

@BINARYUPDATES Год назад

I'll surely making Switch as an input and LED as an output. So that LED will be controlled from button switch connected to ESP8266 NodeMCU. Thanks for suggestions!

@edgarlepiten2883 Год назад

@@BINARYUPDATES thank you for noticing my comment. Looking forward to your video..

@Shash_Lyricals-zx3ki 4 месяца назад

bro mine esp32 board is of type ch9102x driver, it's not showing port in the arduino ide...please help me out

@iCore7Gaming 5 месяцев назад

good one, but you missed a huge part about installing the driver for the USB chip. only took me 10 mins to fix that but all good.

@masidurrahaman2296 6 месяцев назад

Where is the link??

@aryanreddybanda3030 9 месяцев назад

bro I can't find the the second url link anywhere

@tahayaseen1020 8 месяцев назад

where is the link to download esep32

@theanoopk 2 месяца назад

Well explained with clear point for beginners. For me ledPin = 2 was not working. I have lookup the circuit layout of D2 pin. It was 9. It started working.

@BINARYUPDATES 2 месяца назад

Great, I'm happy to know you've successfully programmed ESP32 Dev Kit. I'll be adding more videos to ESP32 programming playlist. Hope you'll enjoy. Best wishes!

@cgyh68748 6 месяцев назад

helped me

@BINARYUPDATES 6 месяцев назад

I'm glad you find this ESP32 tutorial useful. Thank you!

@qwertywil 5 месяцев назад

3:34 I have problems failing to install the esp32 board manager, is there alternative methods to install esp32 manager?

@eliasalahmar3771 3 месяца назад

have you solved the problem? i am facing the same issue

@andre.ramos.1234 Месяц назад

thank you

@BINARYUPDATES 28 дней назад

Hi Andre, You're welcome!

@Trippytimo 8 месяцев назад

hey whats that white board with holes called? Please answer

@smxrcm1079 8 месяцев назад

breadboard

@Philemonelectronics 11 дней назад

1:50 can find the link you are talking about

@gayanchathuranga8598 7 месяцев назад

esp32 wroom , error compiling to board . Which board should i select? I selected wroom development

@BINARYUPDATES 7 месяцев назад

Hi, Select "ESP32 Dev Module" as a board under Tools section of top menu bar in Arduino IDE. I hope this may help. Best wishes!

@tareshgupta1095 5 месяцев назад

the voltage out of usb ports are 5v , is it safe to connect esp32 with it ? wouldnt it damage the esp32 ??

@BINARYUPDATES 5 месяцев назад

Yes, its safe to connect ESP32 board using USB port because its had LDO on the board as a voltage regulator.

@Adhil_.Muhammad Год назад

Bro i have issue after uploading there is no light blinking in led application and when serial monitor it is show so many command like spi flas boot like

@BINARYUPDATES Год назад

Hi Adhil, it seems to me your ESP32 Microcontroller is not been programmed properly. May it has some issue with flash. Try to press and hold Flash button for 10 second and again reupload the code and see if it works. I hope you may find this useful. Good luck and best wishes!

@Adhil_.Muhammad Год назад

@@BINARYUPDATES bro that is not issue I solved out when I select board node mcu 32 s instead of esp32 board in board manager

@keerthu374 9 месяцев назад

Can i do these processor for esp-32 wroom -32D

@BINARYUPDATES 9 месяцев назад

Hi Keerthu, yes it will work with ESP32 WROOM 32D module as well. Good luck and best wishes!

@anishstechlab7323 8 месяцев назад

sir URL link please?

@mulukyushamdi2500 7 месяцев назад

Hello im just programing my esp32 but always says sketch uses 237109 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variable use 21048 bytes (6%) of dynamic memory, leaving 306632 bytes for local variables. Maximum is 327680, how to fix it

@darokahn1025 4 месяца назад

This is not an error, just info. It's giving you some stats on your code and how much memory it uses on the board.

@mulukyushamdi2500 4 месяца назад

@@darokahn1025 yeah i just forgot to transfer to my esp LOL.

@kanikaadhikari6747 7 месяцев назад

I am a Mac M1 user. I already installed the boards and port but Please tell me how to install the esp32 driver. I face "Failed uploading: uploading error: exit status 2" this issue. Please tell me how can I fix this

@BINARYUPDATES 7 месяцев назад

Hi Kanika, just search for "download CP2102 drivers for Mac M1". And you'll find download link online. Most of ESP32 board uses CP2102 as a USB to TTL converter chip. So installing drivers for this chip will let your device detect by laptop. I'm not frequent user of MAC but I'm sure this may help you. Good luck and best wishes!

@kanikaadhikari6747 7 месяцев назад

@@BINARYUPDATES Thanks sir. Sir another problem i am facing is that the serial monitor is displaying only the special characters. If i want to display a normal comment, its not working. I chane the baund 9600, and try others but still not working.

@nickmosca3346 10 месяцев назад

It does not show my port I have just purchased a new esp32

@BINARYUPDATES 10 месяцев назад

Hi Nick, please check drivers are installed properly. Usually, ESP32 comes with CP2102 USB driver chips from Silicon labs. Once you install drivers and use quality Micro USB Cable then you'll find COM port number in device manager. Good luck and best wishes!

@MultiJohnny91 17 дней назад

download drivers first

@SHIVAMG543 7 месяцев назад

UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=32,mInterval=0. Problem 😢😢

@Halal_broh 2 месяца назад

this program is alread head into its example its a not complete video as per caption mentioned, i want to know that how i can upload my own program in Aruduino????????????

@SHIVAMG543 7 месяцев назад

Please help 😢😢UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=32,mInterval=0

@axriticmusic3473 7 месяцев назад

Help me... After uploading wifi code in ESP32, it shows symbolic language in monitor settings.... Help me

@BINARYUPDATES 7 месяцев назад

Please make sure the serial baud rate is properly setup in ESP32 code as well as in Serial monitor of Arduino. Also, make sure SSID and password is correctly mentioned in code without any typo mistake. I hope this may help. Good luck and best wishes!

@iddddd900 Год назад

hello , why there's no port shown ??😢

@BINARYUPDATES Год назад

Its because you need to install drivers for ESP32 Module in your laptop. Also make sure to use quality USB cable while connecting to PC. I've dedicated video to fic driver issue for NodeMCU on my channel which may be useful to resolve this issue. Good luck and best wishes!

@madtin Месяц назад

Hello, is it normal if the led stops blinking after 5 seconds with this code? :S

@BINARYUPDATES 28 дней назад

Hi Madtin, usually only at the time of esp32 programming happening the LED keep flickering. Blut once the programming is done then LED blinks as per delay in the code. I hope this answers the question. Good luck and best wishes!

@akarshgupta2586 Год назад

My laptop isnt able to detect the board. It is a new esp32.

@akarshgupta2586 Год назад

There is no new COM port showing. Is it the usb cable?

@BINARYUPDATES Год назад

Hi Akarsh, it possible. Try good quality USB cable between your ESP32 board and laptop. Also make sure, drivers are installed properly. I have made separate video on the same. Good luck and best wishes!

@ironik2012 4 месяца назад

i cant select port help me

@jeremiaskotchinski2073 3 месяца назад

There are cables where only the power line is plugged in (Charge only) Are you sure yours is a data cable?

@Harshavardhan15970 Год назад

I think surviving in software engineer is little bit easier than core field 😭 share your thoughts bro

@BINARYUPDATES Год назад

Hi Coolbro, its difficult to say as it depends on person to person. But career is more stable in core especially embedded software, in case if you're working in product base company. This is just my personal opinion. Best wishes!

@Harshavardhan15970 Год назад

@@BINARYUPDATES I have 6yrs careergap, I m from ece background, some of the institutes in bangalore claim definetly you will get placed as fresher we provide 100% placements and knowledge is imp than gap, will companies hire careergap candidates if knowledge is good? Share ur honest feedback

@user-cg9qt8lf9i 7 месяцев назад

bro for me it's not showing the port

@BINARYUPDATES 6 месяцев назад

Please make sure the cable you're using is quality and support data and power both. Also make sure if drivers are installed properly. I hope this may help. Good luck and best wishes!

@anandindnr 3 месяца назад

Hello Thanks for the video and it was very helpful Three additions from me 1. Use a good USB cable or the WROOM32 may not get detected 2. Use the correct USB driver for your board - mine was Silabs CP2102 hence installed the latest universal driver from SILABS site here 3. I did not require to press the Boot button for making it work in write mode Thanks again Note - I could not add links to the download as Google for some reason blocks it

@BINARYUPDATES 3 месяца назад

Hi Anand, thank you so much for adding more points. Best wishes!