This video will show you how to setup the Jebao SLW-20M WIFI Wavemaker Pump. Please subscribe for more videos. Contact support@mingllc.com for any questions.
Hi ive not sat down and figured that out yet, but from playing with the app a little it appears to be many. I had to modify the plumbing a little, switching over to spa flex, as the completly ridged pvc couldnt all fit in the area allotted. I still have 2 more to connect. Those will be installed this week hopefully. On a side note, i did initially add bot to a group mode. In that setting both run the same program. To remove them from that mode i had to delete them and reinstall them in the app. Once the next two are installed i may group left inner, right outer together and same with the other two. That coupled with the random flow nozzles should make for awesome random flow patterns.
What happens if you have 2 pumps, how do you have them alternating? Can you have them in W2 (slow pulse) and have one ramping up when one is ramping down and so on? Thanks
Do you know what time zone the app defaults to? I have a Kessile controller and would like the pumps (I just got two MLW-10 pumps that run off the same app) to run a little slower at night, but not sure if it runs off my phone's time or its own internal clock of which I have no idea what time it's set to. Thanks!
You can program multiple on off points, and different output levels, on a 24hr cycle so you can have it shut off for periods throughout the day, or increase and decrease throughout the day. This is exactly why i ordered them, and the intended purpose
When using the access point linkage, why does it want my home WiFi password, i should just be able to connect to the internal network from the driver. I don't mind using off brand equipment, but this is sus when there is a built in AP network.
Be sure your wifi connection of the ph or pad is in 2.4g The app is not 5g compatible. Once your device is connected to the 2.4, push and hold the wifi button for about 10sec. They will change flashing pattern. Then click the right style pump picture in the app, be close to the controller. Should find it quickly. I had the fail to connect page pop up until i switched to 2.4g Says in the directions only use 2.4g