How To Shave Weight Off Your BMX FOR FREE 

me and my dad did most of this to my first bmx bike. seemed like a great idea until i wanted pegs and realized i cut my axles too short lol

Once you've tightened the stem/steerer bolts you *can* remove the top-cap/bolt (and the star-nut in theory) which is only there to pre-load the headset, not for retaining the stem. Also, when shortening a seat post it has to be inserted far enough that it's about an inch below where the top tube/seat stays join the seat tube. Presta vs Schrader valves: Presta is lighter and requires a smaller hole in the rim but unless you're running super light-weight, narrow rims (e.g on a road bike) the hole size is not a problem these days. When Presta valves came out they were ironically called 'high pressure' valves but Schrader valves are used on MTB shocks/forks running 200PSI or more!?!

Makes my 42 lbs haro shreder feel like a bajillion lbs watching this .🤘🔥🇨🇦

"It's crazy that his I-phone 3 still connects to the internet" LMAO!!! I like how homeboy has a sense of humour.

BACK AT IT AGAIN WITH THE FRESH NEW VID 🔥 This time i’m in class🤣 Still watching it tho 🔥🙌🏾

Such a great community 👏

Videos in epic are great 😉😁😁😁😁 Love your videos always mr.alf.😀

Man alf never disappoints

You guys are so funny 🤣 Phu also omg 💜

hes trying so hard to be serious and his friends just keep trolling xD I love it

Leaving a like for the full metal jacket reference at 5:40. 🤣🤣👌

You guys are so Funny. Great video

I’ve never weighed my bike. Lightest ever was my 2008 Fit Series 3.5 with 99% Fit parts, Odyssey wheels and MacNeil Pegs that were super light and would slide forever I remember Mike Taylor (BSD) even had a pair as they were the lightest steel pegs at the time. But recently I got my Daily Grind Steel peg stuck on a broken axle, but I’m riding the og Merritt Steel peg up front and I have a Van Homan G-Sport Peg on the rear. I remember the actual first time I had a light bike I got KILLED at FDR overshooting a hip as I never had a bike so light. In 2002 I was riding a MacNeil Ruben frame, 36 hole Hoffman complete high roller wheels , my first flip flop hub so my first 39 tooth sprocket. But I really loved that bike to where I rode it until it was out of date, then in 2005-07 I rode a Federal Division, saved up in 07 for a FBM Deployer cracked it in a year but it was a trail frame I was 99% riding street with then 08 I got the Fit Series 3.5 , after that a T-1 Ruben, my buddies old Fit ED 21” got a BSD WZA in 2011 it gets ran over by a truck in ATX, so I’m on a FBM Anthem edition Steadfast, that breaks a bit down the line, but I got a BSD Forever Frame in 2012, it’s still being rode today by a friend, but then went back to a FBM Stairmaster haa, but in 2013 I finally got a new custom bike thanks to Robbie at Cult and Animal, then my favorite bike a Fiend Morrow V.2 last pair of og $cerbo bars gets stolen, I’m back on my BSD Forever until Matty Aquizap last year sent me his Credence/S&M last prototype of his signature Black Magic frame it’s mad long but again beggars can’t be choosers. But I honestly really want to try a Subrosa.

Half the people I ride with are hurt right now (including me), heal up Phu, maybe time for a vacation.

Can’t wait for tomorrow ✌️

14:23 bless you Max!

i had a free agent when i was a kid and i thought i was the only person who rode that lol

You can also cut the steerer tube and ditch that conical spacer for a low-profile one.

When he said is that yu ge oh I died

I just finished my last exam and im late always arrived❤❤. I hope you will give me that bike 🤣🤣

You could slice pieces out of the seat post or drill holes through the seat post and also drilling female bolts or stem bolts to hollow them out also going with a stolen thermalite seat post and drilling holes through it and shortening the post aswell as using a hollow or aluminum seat post bolt / pivotal bolt

That Vegeta tattoo is lit! 🔥🔥🔥

Epic!!!!

I support Phu!!!

Might seem dumb but if you look at the gsport pegs metal core, their pretty short and pegs dont seem to snap! Could cut the metal inner core of the peg about half way or 3 quarters the way

Great👌

Shadow Conspiracy Hollow stem bolt/titanium stem bolt helps.

Wessel cranks!?! Weigh those beastly lookin things!

My fit TRL was 26-27lbs stock. If it came shorter than 21" it'd be a bit lighter

Phu rules!

Phu is the best homie in this channel

Could you make a video with phu on how to install all four pegs and maybe show it on a bike that has brand new ones and how to get them on once they get beat up maybe show another bike that has beat pegs beat bike type shi. hopefully plz n ty!

You guys should look into getting a bandsaw

I brake set up weighs about a pound. A long straight cable actually ends uo heavier than a dual cable set up if done properly. But barely. Aluminium v brake noodles weigh less than housing. Especially linear housing. You can run the bends tighter and run shorteren lengths of housing. Less housing and a few other tweaks and not needing a cable hanger helps makes up for the gyro bits. It's only a few grams lighter though. And housing dependant on the lowers.

Phu should practice the safety squint instead of the look away it's a proven method by machinists 😆😆👍👍👍

i don`t use my brakes for riding, i only have them so i don`t get run over by cars

Make a video about how to recover a stolen bmx from the tent camp in the woods

My buds full carbon fiber XXL Supercross race bike comes in at 14pounds 15 ounces... its incredible... but hes got over 4g in it..

I got 4 chrome pegs, 2 chromoly hub guards, and 2 plastics with a brake at 27 lbs but I cheated with titanium stem/seat bolts.

+1 for car shop

"I need some new friends cuz I'm unfriending this guy" lol 😂 Alfredo and Phu really know how to keep it entertaining while learning stuff 👍 Wish all school teachers were this entertaining I might have paid more attention haha

"You havent even seen your first hole yet!" LMAO. My older brothers friend always used to say to me "Kid shut up, you cant even jizz yet!"

Who’s car? Which got grinding speaks stick on it?

Where is this shop🤣 I would be a regular

My first time i watched ur video was how to make ur bmx lighter😅

How much would it cost to have a bike/parts to build one, shipped to the UK? The prices over here are insane.

I broke my chain now I've a freecoaster 😂😅✌🏻

Take grips off put handle bar tape in place of it

Some one give this man a pair of safety glasses lol

Hello guys I'm looking for a bmx backwheel 9t or 12t please guys

I got your back fhu

You think it would make my bike lighter if i take out all my spokes? I need to shave some weight cuz im part of the #HHG🐖

Application for friendship lol

dialed the hair for this one huh?

I love me sum lil Debbie 😂

Couldn't you cut a little bit off of the ends of the pegs?

1:28 in the video and bro my bike without pegs and brakes weights 27 pounds 😓

Just ride my 36lb WarPig for a week and magically, your bike will weigh 12lbs after without any modification 😅😂

👏👏👏🙌🙌🙌✊✊✊

This one should be good my fit is a tank 😬

Dont worry Phu... i got your back... but still, when you being grinded by those guys, i will be sure to look away, just as you advised..😆😆😆

Hack to the max ✌️😜

Big Boy is now your team mate. weird world.

forgot to take the tire caps off lol

But it will whistle lmao 😂

I’ve never used an adapter a day in my life😭

Never gonna dance again 😆🤣😂

I'm missing Ethan's interventions on the videos

I cut my seat post and remove my 4 pegs 👌👌👌👌

You shouldn't take the stem bolt off.

Is he a half filipino?

Fudge packs😂😂😂😂

Presta valves suck. Bend easily.

yall need to 3d print a safety guard to hold it ... straight edge makes a bully, angry for sugar and weed lol ...projecting haha ....teal is on fleek

Filipino ka sir?

Have u guys ever had someone steal yalls bikes? I see couple of them on a parking spot which concerns me A lot Lmao

Ethan is not working for epic no more?

Pan back and stabilize the camera.

It's a Caliper, rather than Micrometer. Lol

Yeah just look away.

Do some type of workout then maybe you won't need to "shave some weight off!" 💪🏾💪🏾💪🏾💪🏾💪🏾

For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life. For God did not send his Son into the world to condemn the world, but to save the world through him. John 3:16 and 17

gets a DBZ tattoo and still can't pronounce the name.

alfredo literally just posts videos he posted 6 years go lmao no wonder his channel is dead

That wasn't smart. Don't use power tools like that man lol

it must be the water idk we didnt have those gay bike or dudes that sound like women in 92