That's actually a great video for beginners. Many of those problems require experience to be solved without a guide and this video is just right for that
Had step 4 happen at the field. New to airsoft and some ppp were helping out and found the negative was disconnected. Thankfully saved the night to play airsoft
i just bought a brand new valken m mod and the gun isnt working. its making the sound and all, but it wont even shoot. i also see air coming out the front of it. can anyone help me???
FrankDad My guy, that was a joke about my build that Daddy Cisco roasted in the last video... The one with the 3D printed tube rail, drop stock, and trigger guard.
so for tech work do we have to walk into your place for u guys to work on it or can we ship it since i dont live anywhere near you guys and there is no place near me to help fix my gun?
Sheesh! My G&G CM16 Raider stopped working and had a loose trigger so I did as you said and connected the red wire back since it was disconnected and it works now, btw I've bought the gun and had it for 5 hours when the wire got disconnected. You instantly earned my respect.
Ayy man a good tip to keep those connections tight pull them off and take needle nose pliers and slightly squeeze the metal folds so they hold a better and tighter connections
Just throwing this out there in case anyone has had the same issue. A few years ago I bought an SRC SR-47C from my local field. Brand new, warranty, etc. I ran it about twice every week for a month and at the tail end the wire folding stock simply broke. I didn't drop it, bump it, or in any way harass it, the stock just broke. Unfortunately this happened while I was playing and a pin fell out and was lost to the field, so I couldn't fix the stock. For whatever reason, it seems the fire control system was connected to the stock because it will not fire at all now. Did all the steps that are listed in this video, some that aren't, got the people at the field to look at it, nothing. Wondering if anyone has had the same experience and either managed to fix it or bodged it somehow.
@@cannedgoose3259 I'm not really familiar with your gun, but there might might be running a cable around it to the motor. But I don't think that would be a actual problem. Maybe the fire switch gear is the problem. There is a quarter circle like gear on the gearbox and maybe it got somehow stripped. You have the folding buttstock right? And are your cables running through the handguard?
@@kamilbalogh7267 well, far as I could tell the cables run through the receiver. it's an AK pattern, so under the dust cover is where the battery sits. it's a folding stock, yes
Hi. I bought a new gas pistol and i have problem that the gun is firing too high, even when I set hop up to minimum or unscrew it. I think theres a problem with bucking. I don't know. Sorry for my english.
Hello sir, can you help me? I have an aisoft (BB) gun and there's a problem shooting. I'm trying to open the screws of gun, but they are stuck and actually I don't have any. stripped screwdrivers. Waiting for you reply!
I just took out the front pin on my lancer tactical Lt-29 (needle tail) it was ridiculously tight fit. I had to use pliers. Now it won't go back in as the bore holes are miss aligned. How can i get this back in without sending my gun back. Its a few days old
I have one fro. Evike that won't shoot any better without a new hop up and bucking. No matter what I do, it runs even worse than the original. Guess don't buy from Evike at all. They suck
Hey airsofGI, I hope you see this and respond. I bought a gun from you and it feels great though I have not shot it yet because the magazine came broken. Yes. I opened it very exited to shoot because it is my first gun but when I tried loading it all of the bbs shot out. I have tried calling you many times yet you don’t pick up. If you want to talk or get more info please reply to this. Thanks, Eli
Hello, I am sorry to hear about the issue that you are having if you could please email rma@airsoftgi.com with your order number and a description of the issue we would be more than happy to assist you.
I checked this video out after searching how to fix my gun's loose buffer tube. I already knew both of these methods of tightening it but at the slightest of bumps the buffer tube becomes extremely loose. I have full metal CYMA m4 that actually just came in the day that I am writing this and I just cannot for the life of me figure out why it is like this. I don't want to tighten the screw any more because it is to the point I feel I would break the gun by stripping the threads and no matter how tight the castle nut is, tit continues to become loose. There appears to be a pressure fit piece in the tube that the head of the retaining screw uses to hold the stock in that seems to be a little close to the front (towards the receiver) of the buffer tube. I have tried to use my hammer and a long flathead screwdriver to punch it back in but it slides right back down the tube when I screw the tube back on. I would just like an answer as to what I can do about this if anything. I would appreciate constructive and appropriate answer as I am newish to airsoft and this is my first full metal aeg.
I doubt it would help but maybe looking up Cisco's we build your build videos it explains alot about weapon customizing and did a full video on how to change out your stock and buffer too could find something useful in the video he used a method to help keep the buffer nice and tight in it
@@douglasbowden7426 Thanks for the suggestion. I just ended up sending the gun in as it was well within warranty and they sent it back with absolutely zero wiggle. They told me that the interior diameter of the tube was the tiniest bit off, like so little of a difference you would need to use a micrometer to measure it. They just replaced the buffer tube and it works perfectly fine now.
my airsoft gun stopped shooting, the trigger is super, super hard. at this point imma fix it and sell it. its a very very good rifle but i stopped playing bc of the errors on the rifle
I have an electric lancer tactical m4 and the bbs keep traveling towards the left and some bbs shoot straight I have messed about with my scope to sort it out but nothing I took off the scope to see if they shoot left and they do so it has to be the gun what would I do in that specific situation? Thank you.
I know I am a little late, but just the other day I had to take apart my M4 to fix my fire selector, and upon reassembly and firing, it would shoot auto in semi and auto positions. Any ideas how to fix?
my airsoft will scream my name during rainy days says it will wear my face and also leak blood and moan every time when i insert a mag, should i put HPA engine in?
Thank you airsoft gi my airsoft rifle has made some weird noise, I thought my airsoft was broken or something but this vid help me fix my airsoft rifle🎉
what happens if for example you can fire 2-4 shots with out issues and then the gear box doesn't fully pull back the piston? couple of tries its working again and then again 2-4 shots n the same again? this is my current issue.
Hey I just got a hicapa pistol from Amazon which worked fine at first but later when I put about 5 rounds in it it would go through just three and run out of gas way to quickly, any ideas on how to fix it. Plz see this
I have a really stripped screw in the bottom of the handle for my lancer tactical gen 2 nightwing and it is grinded down to the bone. some screw drivers can get it to turn a little bit but it doesnt unscrew and just spins in place. please help meeee!!!!
my arg m4 is like making a sound like its about to shoot but just doesn’t like its the beginning of shooting and stops not jammed but haven’t checked the pistol grip yet
Hi i just bought a pellet gun the first time i tested it it worked but the next day it cant shoot i cocked it back but something is jamming my gun idk what it is
Today my whole ass battery cable that goes through the buffer tube decided to behead itself at the start of the inner buffer tube. I have no idea what to do now. This was for my g&g pws mk112. Please help GI. 😔
Tip for MISFEEDS: aeg users… ditch the hi cappas. Mid cappas feed consistently given you use a respected brand, hi caps always fuck up. M4s get the elite force mid caps on Amazon it’s super cheap for a box of mags. AK users look for waffle mid caps if you want durable and trustable magazines, for basedlite/bakelite enjoyers there isn’t too many strong bakelite mags but I’ve seen people take mid cap internals and put them in real bakelite shells so theres an expensive but Gucci alternative. Pew hard fellow AEGrs
Lmao i bought a g&g cm16 v2, and it fawking gave up when i was TESTING it😂😂 like it started to malfunction before i even managed to bring it up onto the field lmao
i had just bought a king arms pdw 9mm but it just stops shooting it will shoot like once and then stop no response from the gun when I pull the trigger. I tried to check the motor height and that didn't do anything as I adjusted it I then check the motor wiring and battery wiring they both seem fine. i feel like it might be my battery so I bought a new battery. Any tips or help though ?
What if this gun sounds fine, with no connection issues or screeching, or blockages, gun seems perfect but bb’s don’t shoot out the barrel, they just fall out when tilted downwards. Literally can’t see or hear anything wrong with it, but bb’s get sent to barrel gun makes right sounds, but bb’s just sit in the barrel and fall out onto floor right at my feet lol.
My gun jams almost every time I shoot : so it shoots then it jams I un jam then it shoots and jams and every time that happened when I pull out the mag two bbs fall out btw moly gun is green gas M4A1
