How To Solder a Small Jump Ring and Bail to a Large Pendant Without either Melting

Подписаться 139 тыс.

Просмотров 65 тыс.

50% 1

Andrew shows us how to solder a thin jump ring and bail to a large pendant. There is no magic to soldering, it's just knowing how to handle your torch and knowing where to aim the flame.
Plenty of hints and tips to be learnt in this film. Don't forget to stick around for the bloopers.
#AtTheBench #JewelryMaking #soldering
THE EQUIPMENT I USE TO VLOG AND FILM
Epidemic Sounds www.epidemicso...
Canon 80D, Body; amzn.to/2Lfkdk7
Canon Lens 10-18mm; tinyurl.com/gnc...
Tripod for Canon; tinyurl.com/hdh...
Memory Cards; tinyurl.com/z8m...
Card Reader; tinyurl.com/z97...
Microphone, Cheap; tinyurl.com/hbx...
Microphone; tinyurl.com/zpj...
Canon G7X Camera; tinyurl.com/jkv...
Tripod for G7X; tinyurl.com/z27...
Mini Tripod; tinyurl.com/he9...
Mavic Drone; tinyurl.com/jfh...
360 Camera; tinyurl.com/jbm...
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@o0superflu0o 18 дней назад

That blooper picking up the pendant - I felt that. So glad this even happens to people with ample of experience, albeit hopefully much less often than it happens to my scatterbrained self.

@k.epicdragonfly3966 3 года назад

Love how this man doesn’t WASTE your time. If you want to be taught this is your guy☮️

@BobShaffer-wt6cs 10 месяцев назад

Andrew, I look forward every evening to watch your videos. I finally signed up for your course but just the free one. At my age of 76 years I will never use all the knowledge I can learn from your regular courses. Thank you for all the time you spend teaching others your craft.

@allanthompson9695 Год назад

I have been soldering electronics for over 45 years. So when I found Jewellery making, I thought soldering would be easy. Wrong. Although I understood, heat the joint not the solder, there is so much more to this type of soldering. Thanks Andrew for making our journey so much smoother.

@joannamcdee9061 2 года назад

I love how you explain IN SCIENTIFIC ANALYTIC TERMS what you are doing/why you’re doing whatever... That manner gives me the BEST understanding, rather than following someone’s actions or “do this/that then another” directions. THIS makes an excellent teacher! And I thank you Sir for meaningful lessons!

@FatKidBrody 4 года назад

Andrew your out takes are just as good as your instruction. I have learned so much from you over the years. Thank you sir.

@Nickporter17 4 месяца назад

The out takes were hilarious!

@marcosofsky2605 2 года назад

you are a funny Brit, you make the New Yorker laugh! Great videos!

@monoymono9 4 месяца назад

lol, even your bloopers are good. This is great information! thank you.

@gjk540 Год назад

Brill, handsome jewelry man!

@finecreationsjewelry Год назад

your help is so wonderful. Thank you Andrew Berry!

@carolchase2086 2 года назад

I am an at the bench member and I still love watching all of your videos, even ones I’ve seen it before!

@michaelma6623 4 года назад

you made this feared soldering feat so easy to understand ..thanks Andrew, and sharing with classmates.

@aggiraffelover13 2 года назад

such a good demo! this is so hard for me and then to hold the jump ring instead of a 3rd hand......I struggle with this!!

@jamessalisbury3320 Год назад

I’ve watched these RU-vid vids and each one has helped me. Thank you and keep em coming.

@silverpearls8344 4 года назад

Amazing! Can you show how to solder a fine jump ring to a very fine chain as well?

@Coleman77 4 года назад

Silver Pearls Have not tried it, but you can mix borax (Or boric acid?) with denatured alcohol flame it off, then there is a layer to protect the rest.

@tim9430 2 месяца назад

Thanks for demonstrating a joint that provides reliable strength, yet has no mechanical connection (like twisted wires have). I just picked up a T&C toggle bracelet at a yard sale, but the little jump ring that holds the toggle ring on broke right where it was soldered to the ending bracelet link. I thought for the price of a repair I could buy a butane torch, some silver solder and borax, and just fix it myself. So thanks for the instruction. I'd have melted that jump ring for sure.

@johndo3930 4 года назад

Hi Andrew i must say as a fellow goldsmith your instructions are very clear especially if you take that 80% of those actions taken you do on auto pilot without thinking and you still gave your students every step by step detail , well done

@oleksandrakoroliova Год назад

Absolutely love your videos. Thanks a mil 🥰

@lenastiward8657 11 месяцев назад

So curious how that corrugated bead was made - so beautiful! Will there be a demonstration of that bead at some point?

@priscilladesert4078 2 года назад

Great demonstration thank you

@clairewheeler2937 4 года назад

Hahaha, the bloopers make me giggle. Thanks for great advice as always.

@Johnbro8 3 года назад

Thanks for sharing Andrew

@smile9297 4 месяца назад

So helpful thank you so much

@mary-annkieckhaben5026 3 года назад

i love your Kanal and your good Tips thank you for shering

@tinxz2915 4 года назад

great again!

@crystalallen5895 4 года назад

You are an amazing teacher! I have been wondering how to do this for a while. Your instruction is superb. Thank you for sharing this ou information freely

@elisazulueta9535 Год назад

I have learned so much from you, you’re a superb teacher.. thank you ❤

@k.epicdragonfly3966 4 года назад

Awesome! Love your style and humanity. Thanks for the tutorial☮️!

@Tenorosa Год назад

ill be trying this on tuesday! soldering a necklace finding to the end of a string of silver beads strung on 1mm foxtail chain. i have about 3-5mm extra chain to work with and needed this tip! (i thought about also submerging the string of beads under water and covering the top of the bowl with a heat shield and also putting stop flow on the chain so it doesnt suck away all the solder away from the joint)

@richardlazine5243 4 года назад

As usual your advice very helpful. Now I should be able to stop melting and wasting so many small parts. Thank you.

@RobertHampton747 4 года назад

I like the bloopers. You did a very fine job with this subject. It's a very precise skill and your tips are a necessity for success. Thanks!😃👍

@paulstein2480 4 года назад

Very valuable instruction, thank you. The OUTTAKES are what I live for!

@MisterHeim 4 года назад

Thank you for the technic instruction Master Berry... take care of those finger burns

@Silversmith70 4 года назад

Good too see you on video again!

@jiwbink 4 года назад

Mr. Berry, This is only the second video of yours,that I have seen. In the first,you melted and poured about a 16 gram gold ball. VERY IMPRESSED! Soldering,like any welding operation,ALL ABOUT PREPRATION!!! Excellent video,great information! You,sir are a credit to your craft!

@patriciacalvinho4629 7 месяцев назад

THANK YOU SO MUCH!

@Coleman77 4 года назад

Loving the blooper reel ❤️

@naturesjewel69 3 года назад

Thank you for your instruction, I learned so much from watching this video. Made way more sense then what I was taught. Awesome!!

@cory9659 Год назад

Thank you so much for this. I had been wanting to solder a second jump ring on the bottom of one of my pendants after I had jewelers that failed to do it well and with your instruction, I was able to do it perfectly!!

@jimbettridge3123 4 года назад

Thanks Andrew!

@mr.silverkeys6467 2 года назад

Thank you again for the instruction. Learning this a small piece at a time.

@243WW 4 года назад

Fantastic teaching. Methods are very much appreciated! Thanks

@MountainLife.LiveMore 3 года назад

Love the bloopers,nice video thanks

@stevetenney5098 2 года назад

Great video; love your work, any chance Of an instruction for a mid evil pie crust ring setting?

@msstarlight4770 4 года назад

A friend of mine is just beginning at silver-smithing, & was really happy to hear about your channel, so you didn't just get me as a new subscriber, you got her, too. ☺☺☺

@DMurphyNM 4 года назад

This was a brilliant teaching!! Thank you!!!

@inderpalkaur6836 3 года назад

You are amazing teacher.I am so thankful to you.

@rgletiziaful 4 года назад

Great job Andrew. Thank you for sharing.

@paullemay3218 4 года назад

Thank you for sharing another great tip. 😎🇨🇦

@petrichor7121 4 года назад

That was a truly fascinating lesson.. very detailed and instructive! Thank you so much.. it's so apparent that you love what you do 😊

@paolodavies6714 3 года назад

excellent thank you

@shopkinsillystories5009 2 года назад

Thank you for that Andrew, your video's are so helpful. I am having trouble soldering a small ring to a 3mm bezel cup with an earpin already soldered to it, any tips? Thank you

@alicerosa6766 2 года назад

Very good instructions I've learned something new. Thank you for the explanation and great video👍👍.

@camgray72 3 года назад

Perfect explanation! Thank you!

@rimonagale1625 4 года назад

Great tutorial! Thank you. 😃

@DreidMusicalX Год назад

That was not exactly what I was looking to do when I crossed your video. But you taught me something for future jewelry making. Very interesting things to know, like not having them explode because a hole is there. But you said borax? I have that, did you also mix flux with borax? Or is it just borax that you're using. Subbed as well.

@pauldegrande4008 4 года назад

Good Job, Berry!

@sandywood8437 3 года назад

Thankyou for this tutorial im new to this type of jewellery making. I just couldn't get it right. Have now.

@mygreenhousediary5947 3 года назад

This is great, I’ve melted quite a few jump rings now, really appreciate this video!

@harrystanley8602 4 года назад

I wanted to thank you or your excellent videos. I am new at jewelry making and have learned so much from you. you

@s.aura.h8084 3 года назад

Finally got my jump ring soldered on! Life saver Andrew - as per! Thanks :D

@friendswithfairies3278 3 года назад

Thank you, Andrew- this is very helpful!

@SC-rb2jr 4 года назад

Superb. You bring out some subtle points,that make the difference between good results and bad. I always come away feeling I know just what to do. Thank you.

@brainscrub7976 4 года назад

Exactly what I needed, thank you!

@jimallen199 4 года назад

excellent instruction thanks Andrew

@karlheinzmrazek830 4 года назад

Brilliant teaching!! Thank you!!!

@mckinneykathy6 4 года назад

Thank you for helping me learn how to solder properly. I wonder if you have a video about soldering prongs (say 4 of them) onto a base to hold an oddly shaped stone. Do you solder each prong separately or try to solder all at once? Thanks.

@LisaPilley-cq9zv 4 месяца назад

so helpful

@charissacherry834 4 года назад

Thank you for your wonderful explanations, detailed information that is so very helpful.

@eaudehaj 4 года назад

Newbies here... very informative.

@Maria-rx6lb 4 года назад

Thank you for this helpful video! But I wonder how you pickle the piece without getting pickle into the hole?

@kumikoayers2904 4 года назад

Thank you for the instruction which was so useful. I was wondering if you could help me as when I make a ball with a little hole, I always struggle to get rid of the water after I cleaned it in a pickle. Sometimes I thought I got rid of all the acid then a few weeks later I realised I found a residue of acid. How can I get rid of all the water? Thanks in advance x

@marenc9648 4 года назад

Hallo Andrew, thank you very much for your great video. I have one question... what happens with the wholes? Do they remain or do you solder the bail and the jumpring directly on the whole? Greetings from Germany

@meowsaidthecat5338 6 месяцев назад

Is it not better to remove the solder first before it eats in, and then solder the jumpring? Thank you for the explanation though:)

@ladypearl3857 4 года назад

How funny.. this is exactly the project I’m doing - sterling silver ball pendant!

@54joon 3 года назад

Bravo

@christopherj3367 4 года назад

thumb bell smashed.

@faybarrow5035 2 года назад

It really makes sense but what about soldering into a bezel strip when looking to set a cabochon? So many failed attempts 😢, any advice would be gratefully received

@catalintzetzeradulescu568 11 месяцев назад

Thank you for all instruction, Andrew! Tell me, please, what liquid you add to the borax? Is just simply watter, or mixed with some bit of alcohol? Thank you in advance!

@Atthebench 11 месяцев назад

Hi. Just plain water

@catalintzetzeradulescu568 11 месяцев назад

Thank you, Sir! @@Atthebench

@sergey9178 4 года назад

Good instructable, as well as many other ones of yours. Andrew, thanks a lot for sharing with us your experience. IBy the way, I like you borax brush, I really do! :) Does it ever gets back to it's original shape? ;)

@ingridsaab5413 4 года назад

Hi Andrew Berry, thanks for teaching this skill. I have a question regarding the hole. Do you live the hole or do you cover it with more material? Thanks 🤗

@Atthebench 4 года назад

+Ingrid Saab it’s only a tiny hole so i would just leave it or fill it with a tiny bit of beeswax.

@fpsmizzy9954 11 месяцев назад

Hi there! My loop ring actually broke off my pendant so this is something I’d want to do- can I also use medal jewellery glue? The pendant is rather small and light? Or should I stick with soldering?

@Trid2bnrml1 4 года назад

There are some hateful people who just can't stand a good video...ignore them.

@ma1900bi1900 4 года назад

Is super thank you

@leroyc179 4 года назад

Andrew, your an excellent teacher, very clear and concise explanations. love the bloopers LOL but not borning your fingers, don't do that.

@shoptwoblooms 4 года назад

How do you set up your soldering to solder several pairs of posts on to the back of your small earrings at once? The other day I soldered 14 total to make 7 pairs & set each one up in a third arm w/ a clip which took awhile & figured there has to be a faster way to do this.

@ScottishLM 4 года назад

Great video! I have so many cool resin balls. I was wondering, would it work soldering a jump ring on a small bezel cup upside down then gluing the cup to my ball. Would that work? Thanks

@virginiaa126 4 года назад

Have no clue as to what you’re doing, but it looks interesting.

@debragallagher-gv2fc 11 месяцев назад

Hi Andrew, would it be possible to attach the bail with a soldering iron instead of the torch, please? Many thanks, Debbie

@Atthebench 11 месяцев назад

Hi, no a soldering iron won't get the metal hot enough for the solder to melt

@debragallagher-gv2fc 11 месяцев назад

@@Atthebench Hi Andrew, thank you for that and for such a fast reply. It looks like I will be investing in a torch and putting the fire brigade on standby! Many thanks, Debbie

@Ty-ri7dy 4 года назад

What happens to me is my tweezers tend to get stuck to the jump ring. Usually by heating them up slightly they will let go eventually, but sometimes the extra heat is just enough to melt and warp my jumpring/bail. Thanks for this tutorial, Andrew!

@michaelbias3451 Год назад

Andrew..I'm having trouble soldering thin and small bezel gallery wire and I put a 14g bead wire at the base of the gallery wire..I always end up melting something...do you have any advice...I've heated from the bottom..from the top and still end up melting product.sometimes the solder just turns black and doesn't melt..what is going on please help me figure this out...

@beatrixwright 3 года назад

Hi Andrew, I have a question I was hoping you could help with: Is it possible to put a little easy solder over the hole (that usually allows air to escape when soldering) in the sphere if I don't heat it too much? Thank you! And thanks for your excellent videos!

@whywouldicare8618 4 года назад

Man all your videos are great I can’t afford the membership to the website but this is just as good I’ve started silver smithing but I can’t seem to get it to pour it Melts but it doesn’t fully turn to liquid it like the top layer melts and the bottom is still hard any tips on how to get it to pour and what’s the acid you put it in to clean it I just sand it and wire brush bits to clean it or vinegar then sanding etc lol

@Atthebench 4 года назад

The metal is not getting hot enough. The surface nay be molten but the heat has not reached to the core, middle of the metal. More heat or a stronger or simply more time is needed to get the whole lot of metal molten. We use a safety pickle, sodium bisulphate, as a pickle

@garrodanne1630 4 года назад

Merci :)

@tenhats7036 4 года назад

That video was very helpful, but ihave a question: when you pickle that piece, how do you avoid getting pickle into that hole?

@gwaaiedenshaw8310 4 года назад

I’m probably not being helpful here, because this is kind of the bane of my existence. I I deal with it in two ways, neither of which is “solving” it, so I will hope for more responses here. So the first thing is having backing soda dissolved in the rinse water. This neutralizes the acid so that if the rinse is incomplete you don’t get acid showing up inside the hollow form down the road. What you can get is chrystalized baking soda once it dries out, which is not a problem, you just need to have a second rinse bath that is plain water. The other thing that I always do is use a syringe to inject water into the cavity. I do this probably way more times than I need to. But I do it six to ten times. Aiming the tip this way and that. But it is a terrific amount of pressure inside. It still takes a while for the water to come out after this so I usually put it under a lamp, or something, and get busy with something else.

@nachmanbayever6631 3 года назад

I'm working on a piece that has thin wire wrapping kind of all around the heavier piece, and my flame is not precise enough to just hit the larger part, are there any techniques that can keep the wire from melting or will I need thermo-gel or a better flame?

@ma1900bi1900 4 года назад

Danke so vielmals echt ist so toll

@brendawhite243 4 года назад

Hi. Great video. But you have scared me a bit about the silver exploding! Is there a rule about when to make a small hole according to the size or shape of the piece?

@johnmimist 4 года назад

Brenda White I always say better safe than sorry.

@loisfrazier2834 2 года назад

When you apply the borax, with a brush to your piece, how is the borax prepared? Is it mixed with water that it needs to b applied with a brush? Is it a multi part solution?

@Atthebench 2 года назад

We grind the borax cone on a non glazed dish with a little bit of water to produce a thin paste and then apply that