Hi Welcome to Dudz Daddy Tech Channel. Paper jam error no need for disassembly... Repair Done in few minutes. Follow the procedure and anybody can do without technical skills.
Hello po thank you so much for this! Super helpful! I was in a state of panic because I found a small part of bond paper jammed inside the printer that was hard to pull. I tried opening the scanner unit and it's now working again. Thanks!!
This is AMAZING! One question though, our printers top is NOT going down, its a Epson L4160. It seems like the printer cover is stuck so we're trying to fix that. Also, apperantly if we keep the lid open, we CAN'T print. This is a HUGE problem, can you give any suggestion(s) on what to do so it goes down?
Hiii can i also consult on how to reattached those white threads/wire on L3110? Ours got disattached from it’s places so currently there’s no connection or power in our printer😞. Thank you 😊
hi, thanks for the video first. I have the same problem, the springs are not moved from their place and there are no foriegn objects in the paper way. Still it showing paper jam... any solution please!!!
@@dudzdaddytech5497 it is not feeding the paper on its own. if i move the the pickup roller with hand then it takes and rolling out the paper on the other end. Then the paper jam light blinks continuously.
Kindly check the roller, check it's alignment, it is located in the center lower portion, it should be in placed along with the slot. If not properly align, on its back is a spring and probably not hooked.
encouter po ba?pag mag xerox ng mga apat na papel tas nag feed ang papel. nag sstop cxa mga 20 second bago mag print. 1 ulit tas sunod ganun ulit. pag pasok ng papel nag sstop.
Sir na try ko po yung procedure..but its not working...yung disc hindi nman po tanggal..wala akong mkitang spring..paper jam po ang problem ..wala ring foreign object sa loob
Hi Louise, thanks for watching my video.. And to answer your question, it is easier to pull the paper on the strongest point where the paper will be gripped firmly, however, if the paper is torn, you need to open the printer, remove the two screws and you have to pull out all the pieces of torn paper. You may use pincette to hold the paper, drive the roller manually to push the paper out.
ano po problema nagpaper jam siya...oke naman yong spring...nakakabit naman...bagong palit din ng timing belt...paper jam parin nilinisan ko rin ang encoder strip....error parin
@@dudzdaddytech5497 thank you for your reply.. I have opened and checked inside, but there is no paper jam inside the printer. I don't know what to do next.
Bagong bago po yung L3310 printer namin. Okay naman noong una. Tapos ngayon magpriprint lang po 1 page then i loload niya po yung next page tapos po kalagitnaan mag eerror po ng paper jam. I checked all naman may spring naman lahat pero bakit po ganun
1 month pa lang po since nabili. Then siguro on the fourth time na ginamit saka nagka ganun. Okay naman po print pag photocopy, pero po pag magpriprint like from a word file, ipriprint niya lang yung first page then kalagitnaan ng printing ng second page eh bigla titigil with error message na may paper jam
I have problem; it always takes paper, but right side of paper is inside and left is not, it happens always. It is so annoying, please tell me more, if you know... Btw, I have L3151
Hi Adam, did you try opening up to the paper feeding assembly., you may check any abnirmality in there and clean the rollers as it may be slippery already.
@@dudzdaddytech5497 Hi, I removed little pieces of paper but it still takes paper on only one side. Anyway; thanks for responding, I really appreciate that. My dad took the printer to service so I hope there will be no problem in the future.
Hi Cherry, please check the basic first, the ink level maybe low and requires refill, there might be a trapped paper so chk and clean the rollers as well. If you refill the ink perform ink charging, refer to my other video.
Inform me with the ink level condition, roller, if you find jammed piece of paper. Then we will proceed to next possible cause is there is no improvement.
Hello. Sorry for replying late here po, but my printer already work na po. Ang sabi po dun sa pinagpagawan namin, di pa daw po resettable yung printer ang upon checking po hindi naman po paper jam at mataas pa po yung level ng ink. Ang sabi po nung gumawa is kinalawang daw po yung isang turnilyo sa loob kaya pinalitan
Lahat ba nag papel same sinasabi ng pinter and all times Un ang error. Kapag once in a while nkkkpagprint ka naman try corning the roller, but when at all times yan ang error check aligent of rollers and or foreign object.
Hi, can you pls help me? I cant find any foreign objects in my printer since its just new, however, it cannot print in photo paper, it does eat the paper but stops midway and keeps saying paper jam
Yung printer ko may mga page na blank, di sya pumapasok ng sagad pero yung ibang page okey na man may mga time po na di pumapasok ang papel... paano po yun? salamat
Hi, most likely rollera need to be clean or meron foreign material sa loob, remove 2 screws and perform cleaning using alcohol and remove debris inside.
Hi, you to visit the inside of the printer,... Possible foreign object or may gap SA mga roolers and sliders, check muna ung basic and perform cleaning of rollers using alcohol
Hi Maexinee, technically hndi sila relevant , pero ang masasayang kapag nag jam ang papel at nalukot is ung papel at ung ink dun sa printout na ongoing na hndi nang good output.
@@maexinlee8328 need ntn ma tanggal muna ang papel, patnggal ung dalwang screw sa harap then itaas mo ung scanner assemble dahan dahan tanggalin ang papel,, update me with the result. Thanks
Hi, what happened to your printer? Please check if there is teared paper.. Perform cleaning of rollers as well, and there is another spring in the middle lower portion kindly check as well.
@@dudzdaddytech5497 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FrqXF85NOLE.html nina-nozzle check ko po pero hindi naman po rume-respond yung printer
