How to solve one of the most COMMON TURNTABLE ISSUES using Deoxit D5

Подписаться 53 тыс.

Просмотров 87 тыс.

50% 1

BG108 - Using Deoxit D5 to cure one of the most common turntable problems we run across. The pitch just won't sync up or settle down. We have seen hundreds of units like this over the years and as they get older, more and more are susceptible.
If you like this please share it online using #caigvideocontest
visit www.caig.com for more info on Deoxit D5
visit www.blueglow.net for more info about us

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@ktdid627 2 года назад

I can't thank you enough for this. As a visual learner, this was 1000 times easier to understand and feel comfortable doing than all the written tutorials I have read online. Thank you thank you thank you.

@bobgauthier1569 4 года назад

I was told my table couldn’t be fixed so I watched a video and now it’s working great yeah thanks a lot the guy told me I could give them my table parts and he would give me a few bucks for it. i’ll just tell him I’ll be using it for parts. For parts of my album collection. Works better than ever. So happy. I love my Sanyo plus 50.

@alcameron6071 4 года назад

Bob Gauthier Whenever I have a problem with a stereo item, I always search RU-vid to see if I can find a cure for it online. I never, never go to a repair shop. They are bloodsuckers and will rip you off if you don’t know what the problem is yourself, and you just aren’t sure how to fix it. Don’t let them get over on you.

@chkchrycla 3 года назад

You just saved me over $100. My Marantz 6200 turntable was not working right. Wouldn't hold speed at all...the 45 was worse than the 33rpm...but I did exactly as the video shows and now it works great. Seriously, A huge sincere thank you. You rock!

@fullstop213 7 лет назад

As always, thanks for the tips Mark.....and all your great videos. I'm a fan! PS - I'm also a Deoxit fan, 'cause it works! I have a note for all of you out there (most of you already know this) regarding the use of WD40 or any similar product intended to be used a a penetration fluid/lubricant on electronic gear....don't do it! There are other products that can be used in place of deoxit, but penetrating oil is NOT on the list....what a mess!

@Pyridox 7 лет назад

Great turntable, I had the same model in late 70's early 80's. Thanks for the tip!

@swinde 5 лет назад

I have not even watched, but the most common problem I have found with old turntables or changers is congealed grease in the motor shaft. While adding lubrication sometimes provides a temporary solution, the real solution is to disassemble the motor and REMOVE all of the bad grease with a solvent and then add new lubrication to the shafts and bearings. I just watched and see this is about pitch adjust, but it sort of appears to be a commercial for Deoxit. There are many other products that can do this.

@deanfeldman2505 Год назад

Thanks a million! You saved my turntable from 1978 that wasn't spinning.

@kehdepermit 2 года назад

Fixed the problem for me, steady as a rock.

@izaacm2435 4 года назад

Thank you for this video. Pretty new to refurbishing turn tables and every one was saying i need to deox the pitch pots on my SL-D2 and I could not figure out what they meant by it! Finally i was able to fix it Thank you!

@alanhoughton6166 3 года назад

Thanks for this -- about to go do this to my turntable. Oddly enough -- I have exactly the same Technics you have first in your video!

@alanhoughton6166 3 года назад

And it worked perfectly. Speed is rock solid now!

@julesl6910 7 месяцев назад

You just made my night, thank you so much it worked like a charm.

@download333 3 года назад

If you don't have deoxit, you can take your parts and put them in a shot glass of acetic acid (distilled vinegar) for a few minutes to etch away the oxides. Vinegar is about 95% water though which means it will promote further oxidation, so as soon as you've finished soaking/turning the pot you'll want to spray it full of wd-40 to displace the water. Bit more involved than just the one spray, but it works in a pinch. It's how I ended up restoring a bunch of unreliable key switches.

@alexasensi8803 5 лет назад

Thank you very much!! It was that!!! Now I have my turntable working ok again.

@karlhousley3586 3 года назад

Thank you so much for this, worked well after a worrying few hours

@marclacasse1 4 года назад

Great advice. Cheers.

@Capalmer01 Год назад

GREAT info man, THANK YOU !!!

@jackdeee 5 лет назад

I have the same turntable shown at the very beginning of the video, the Technics SL1500; i had also the same issue, but even adding deoxidant to those potentiometers didn't help. I had to move my attention to the speed selector/power switch and after adding a bit of deoxidant it worked

@MrJezzalenko 8 месяцев назад

Support those with skills, knowledge and experience - take it to a technician. This is one item (and only a quick fix, not a solution) from a 12 point check-list on what should be performed as a full service and calibration on this model..as these SL1000s models from this era are worth THOROUGHLY servicing and calibrating. They will continue with perfect speed for decades to come, when given correct care, not quick fixes.

@clintonflynn815 2 года назад

Nicely done! Thank you.

@mikebidus7166 3 года назад

Thank you, Thank you , Thank you, THANK YOU!!!

@vsalasarcr 10 месяцев назад

Hello, fabulous, thank you

@nic2098 7 месяцев назад

Awesome, what about if my turntable sounds low horrible sound tried different receivers?

@garretts91 4 года назад

Deoxit D5 and Deoxit Faderlube lubricant have become very expensive and hard to find other than ordering online. Around $25 to $30 for both cans. I've had good luck with CRC QD contact cleaner. For lubricant, follow up with CRC 2-26. Both cans cost about $10 total at home depot.

@alexreeve 7 лет назад

i like this video even before watching ;)

@1jtolvey 5 лет назад

GREAT VIDEO !!!

@envolvemarketingstrategies4539 11 месяцев назад

Hi Blueglow, I have a Realistic Clarinette 98 with stuck turntable. Is this a congealed grease issue? Do you know where I can find a tutorial for fixing this?

@djbobbyd3985 5 лет назад

Excellent video. I just purchased a Numark TTXusb turntable and the seller said there is no audio output from RCA's, but he could hear music from the needle on the record. Have you ever come across this?

@Jerry_England1 3 года назад

Love your videos! Trying to maintenance my turntables. I have a Scott ps87a and a Pioneer pl730. Do you know which is the better unit? Scott has speed issues and u did the deficit trick, seems to have helped considerably. The pioneer hasn’t been played in years, hit a nice Grado cartridge for it. I look forward to hearing which one sounds better

@mantolaman 2 года назад

Very good video! Clear instruction! Cleaned my pots as shown here, but my speed control is nearly maxed out. Is that good? Or can I make some additional adjustment?

@kehdepermit 2 года назад

On my SL 1200 there is a 2nd set of speed adjustment screws you can access from the top after removing the platter. One marked 33 and the other 45, you can see two white slot screws through holes in the case that go down into that green circuit board. If adjusting those don't help they also may be dirty and you can spray them as well. Just remove the bottom cover and flip the circuit board which is held in place by 4 phillips screws and give them a couple blasts of deoxit.

@mantolaman 2 года назад

@@kehdepermit Thank you. I finally figured that out. I adjusted as you said, and got it back within spec.

@fredberger3155 2 года назад

Subscribed, video was just what I was looking for, ordered some DeOxit D5. Hope it works. I just bought a Technics SL-D3 that has a single pitch adjustment wheel; does that get sprayed the same as the regular knob? Is it possible to spray through the crevices on the top without taking the bottom off? Should I also spray the 33/45 speed slider switch? Thanks!

@geddhead1971 Год назад

Mine has the little wheel as well. And wondering if i can spray it from the top or take off the bottom. Seeing you posted this a year ago what worked for you??? Ordering some spray now because my MCS (Technics)pitch just jumps around like a hot potato now. So frustrating.

@fredberger3155 Год назад

Hey, had to scratch my head as to what finally worked, my pitch jumped around too. But I never did spray it with anything . . . I discovered that if I fiddled around with it for 10 minutes or so that I finally found that VERY elusive sweet spot, which has stayed there since I set it. Grab a chair, sit close and try it . . .@@geddhead1971

@ssgeek4515 5 лет назад

If the deck is old then moving parts will ware,including the speed control pots.You are better putting a new pot in (Lin not logarithmic) Sprays fine but invariably issue returns.

@wreignone 2 года назад

Legend 👍🏻

@foytdie6128 7 лет назад

might be worth mentioning that if you do get a lock on the speed at first and then it drifts back out, thats more likely to be bad caps on the motor speed control board. (for anyone that this video didnt help)

@davehallock3656 5 лет назад

thx!

@radiolabworks 5 лет назад

Agree that's the issue I have with my SL-1500 and when I was in college this was the most common problem (the caps) with these turntables. So I would say that the 95% rate attested to in the video is a bit high ;) Don't get me wrong, I use Deoxit, their Pro Gold and Cal-lube as well. Fine products but not cure-alls.

@cooldead 4 года назад

if this doesnt work what would you recommend to try next?

@johnunderwood3132 2 года назад

Is there anyway to fix the strobe light that shine through the prism

@geddhead1971 Год назад

I have an MCS (Technics made) and my unit has a little wheel you spin left or right to lock in. Can you spray right through the top opening or do i need to go in from the bottom of this type of switch control. If anyone knows i would sure appreciate some info. The jumping around and variating speed is quite aggravating

@makemydayvisions3142 3 года назад

Thanks for the info! How do you approach the Technics SL-D3 front facing pitch wheel and which Deox type is best for it?

@jp040759 7 лет назад

Deoxit cures snake bites. Good luck in the contest.

@pjr114 2 года назад

How about the 1700 with solenoid controls? Also how did you flip that table without damaging the tone arm? Thanks.

@rdavidanthony1790 3 года назад

...but, what needs to be done for a direct drive turntable that does not have speed controls, eg, Hitachi HT-550?

@catherinerodgers7482 6 лет назад

Great video! I have a Technics SL-D2 which has a pitch adjustment wheel rather than knobs or a slider. What should I use?

@brwi1 5 лет назад

Catherine Rodgers I have some luck spraying behind the wheel

@len9518 5 лет назад

@@brwi1 If that doesn't work, then you need to get at the pot from underneath.

@DaJesuts 2 года назад

My AT PL120 is having the same issue. Turntable motor is stuttering. Any ideas for that? Do you think it’s the fader?

@The8TrackChap 7 лет назад

So ironic. I made a similar video myself and just revisited it last night. Now, I still have issues with the built-in RCA cables. I'm wondering if it would be possible to modify it and put in RCA jacks to use any set of cables. And maybe some ground lug to use any wire instead of any of the integrated wires.

@alexreeve 7 лет назад

The phono signal is only around 3 mV or so, with every connector you add resistance and risk losing your signal. Thats why most turntables have the fixed wires... i wouldnt recommend the extra jacks, unless you have something like an integrated phono preamp that puts out "line level" (around 750 mV)

@carlcreary875 4 года назад

Nice video I’ve got a Thomson tt600bt while it playing it picks up speed for about 2 seconds could this be the issue I just bought it April brand new also came with a a wobbly platter and tone arm if u can give me any assistance that would be lovely thanks

@jimmyjoejeeter2366 3 года назад

When my vintage Kenwood KD 2000 it is finished playing, it sometimes skips when it is auto returning to the stand. Does something need to be oiled or adjusted? Thanks in advance. It works great other wise.

@bulldozer9600 2 года назад

Mine lets me set the rpm but then, after a little while, slows down… speeds up.. I set it again and it stays good for a few minutes and then does the same thing. I sprayed the potentiometers but it makes no difference

@Digiquarium 6 лет назад

Faderlube should be used for the regular potentiometers as well. D5 does not contain lubricants so will dry out not long after application, and the lack of lubricant will increase wear on the carbon track as the wiper passes over it. It is always good to flush with D5 first though.

@xavierrose8208 Год назад

Really?? Just spray down the fader/slider?

@MeesterSteefy 3 года назад

Deoxit. Is there anything it can't do?

@maxdavidsonchannel 5 лет назад

I've got a 1350 that is quieter on the left side than the right. Any idea what's going on? Also the mulitplay spindle isn't activating. How could I fix that?

@Ninja_Gaijin 4 года назад

Any reason to use DN5S instead of D5? I heard that for NES (Nintendo 8 bit) cartridges DN5S quick drying is better option.. would the DN5S would similar to the D5 for A/V uses though? I'm trying to see if I need F5, DN5S, AND D5, or can get away with just F5 and DN5S.. for turntable and mixer faders, NES game carts, audio connectors and knobs/dials on audio equipment..

@draxlerchronicles5851 4 года назад

Can this issue affect brand new turntables? I got a new one and after less than a year the pitch has started going berserk.

@rwegtwerrg3398 5 лет назад

What about pitch drifting where the dot moves a bit back and forth? TT is chuo denki c.e.c. disco 4000

@miaodekat4806 4 года назад

I got an MGA Mitsubishi all in one turntable from the 70s,,, but the phono is probably not working well,,, everything seems to be fine but there’s no sound but statics coming out of it. And apparently someone added an AC/BC adaptor at the back. Can anyone please help me to understand what could be going on ? Thanks

@alangross2277 4 года назад

My ON-OFF - 45/33 switch on my SL-23 has this same issue. What's the best way to clean it?

@alangross2277 2 года назад

I used Deoxit on the switch using the same method and it's perfect, now.

@jdmccall2277 3 года назад

Did not help. The strobe won't settle down and you actually can't slow the platter down enough to see the individual strobe spots.

@Amp497 6 лет назад

What about the excessive grease in the De-Oxi t D5?

@Ninja_Gaijin 4 года назад

I heard that if this is an issue it is better to use the DN5S which is fast drying

@edstoy-o-rama4004 6 лет назад

I hav a 80s technics turntable but hav a very low sound output. Any pointerers?

@goodun6081 5 лет назад

Lots of possibilities; does your receiver have a dedicated phono input (has extra Gain, and special EQ)? Otherwise, you need a seperate black box phono preamp (theyre cheap), or a recent-manufacture turntable with a phono preamp built in (typically switchable in or out of circuit). Other possibilities: defective phono cartridge. Phono cartridge improperly wired into the headshell , I see this at work all the time. Or, a magnetic cartridge installed in the turntable, but the phono input on your amplifier unit is designed only for a ceramic cartridge (which has much much higher output electrically, but lousy audio quality). Oxidized, tarnished contacts between headshell and tonearm. Bad phono cables coming out of the turntable. Bad RCA plugs on the end of the phono cables. Bad jacks or broken connections on the jacks you are plugging into . Defective phono preamp inside your receiver or amp.

@gatordave6629 5 лет назад

Maybe somebody can help when I raise needle and bring over to record the record spins for like a second not even a quarter or half rotation then the light shuts of and wont spin any more ?

@wolkewietje01 2 года назад

Wrong! You use D5 on conducting carbon-tracks and F5 on metal to metal. Better practice is to disassemble the pot and spray the F5 onto a quetip. In that way you won't make such a mess and use less of the already pricy Deoxit. AND, it will be more thouroughly cleaned. O, and a handy tip D5=carbon-tracks, F5 Metal-metal (Ferrous)

@BramHepburn 2 года назад

Well, that didn't work. No change 😒

@denniseldridge2936 2 года назад

Hi, just a warning for those using D5 who might stumble upon this video. It turns out that D5 is intended for use with metal-only pots, and will destroy carbon pots like those in many consumer products. It may work great for a while, but after a time it will eat the carbon alive.

@davidw64us1964 5 лет назад

I did

@ArthurJS123 7 лет назад

Pretty soon, Deoxit is going to be toured as the cure for the common cold.

@johnsweda2999 7 лет назад

ArthurJS123 I think he must have a cold he keeps going on about it

@TrueAudio Год назад

$35 to $45 CDN$

@johnsweda2999 7 лет назад

what is this crap about deoxit are you, and another people sponsored by in them. you could just use WD-40 just as good or even better. and there's other context cleaners available. get real man you're losing credibility

@Blueglow 7 лет назад

I'd invite you to go make your own youtube videos on the products you feel are good. That's what I'm doing here. However, I promise not to follow each of your videos with negative comments...

@JoFreddieRevDr 7 лет назад

WD-40's is a moisture displacer, it leaves behind a light oil to keep moisture out. This oil attracts dirt, so not such a good idea, not going to as good a job of removing the oxidation, and going to store up a world of trouble down the line. Yes there are other contact cleaners out there, but WD-40 is not one of them, and stated this is a competition entry and thus needs to be about a product relevant to the competition, there was full disclosure. John, are you in fact that green idiot we see at the end of some of Techmoan's videos?

@alexreeve 7 лет назад

John, WD40 makes it even worse. I get so many devices with failed potentiometers or faders, because people were thinking exactly that. There are just a few products that are suitable for this job, and deoxit is one that works. thats it. You can buy other brands but dont negative-comment when you are actually totally wrong...

@johnsweda2999 7 лет назад

Alex Reeve well that's just nonsense in the radio industry been told to use WD-40 after cleaning your pots to add lubrication

@johnsweda2999 7 лет назад

Blueglow Electronics not trying to give you a negative comments, other people keep banging on about this deoxit, where there's other good bands available nothing special about deoxit just thought maybe you're sponsored by them? the way you seem to endorse it.