One of the most complicated and difficult puzzles in any game. Today we will be going over how you can beat the Mazercise Puzzle in Five Nights At Freddy’s Security Breach! #fnaf #helpwanted2 #ruin #securitybreach #fnafmovie #helpwanted
Hi guys so I did try this and it worked for me because I accidentally hit a button on accident. You do hit 4 4 times but before pulling the switch for the first time hit bottom five once I hope this helps you guys. Thank you so much to the creator who did this it helped me so much.
@@Kenu._. I don’t think you can unless you saved before pressing any of the buttons and respawn there, or you might have saved after pressing the wrong buttons which if thats the case then you have to restart from an earlier save spot or try to figure it out yourself (thats what happened to me)
So glad to help, good luck with the Burntrap ending. Quick tip put Freddy in front of Roxy’s door it traps her there and the boss fight is super easy if you do that.
There’s a few reasons it may not have worked, one reason is you pushed buttons before using the code. Either before and you saved or before you put the code in.
You can save in the office but do not save after pressing any of the buttons or else the code will not work. Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
I’ve tried multiple times and watched so many videos and still absolutely nothing I’m so frustrated but unfortunately there isn’t another way to get through (at least not that I know of)
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
The code will not work if you mess up but if you didn’t save after you messed up then you’ll be able to die and retry the code. Hope this helps, best of luck!
Hmm, Error shouldn’t appear here unless you’re in the middle of another mission. That may be some sort of glitch I’m not sure why it would say Error. Best of luck!
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Playing on X-Box shouldn’t make a different. The problem you might have had here is either because you one touched buttons before using the code, or two put the code in wrong. Might just have to recheck what you did but if you saved after the code didn’t work you might be in trouble. Best of luck man…
If you go back to the video you will see the monitor in the control office should have a grey screen. Meaning none of the buttons have been pushed yet. If it looks like this then the code should work. Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click them correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
Hey there, I’m sorry the codes not working for you. There are several reason this might be happening. The first is you simply didn’t click the buttons correctly or in the correct order. I recommend getting killed and trying the code again (Do not save) and see if you simply miss clicked something. The second reason is that you might have saved prior to using the code. If you clicked even one button before using the code and saved the code won’t work because the maze saved your previous combination. The code will only work when the maze hasn’t been touched besides when you originally touched it to go to get the Mazercise control key. The third reason it may not be working might be because you put the code in and it was incorrect and then you saved which again would not allow the code to work even if you put it back in correctly. So to put it simply if you haven’t saved after pushing any buttons and the code didn’t work, and you hadn’t pushed any buttons prior to putting the code in and having that saved, I would recommend getting killed and trying the code over again and it will work if put in correctly. If you saved the incorrect code your best guess is to guess and check until you get a pathway that leads to the open vent (It is possible I have done it). Thank you for watching and I hope this helps.
