How to: Spray on anti-slip surface

Подписаться 47 тыс.

Просмотров 11 тыс.

50% 1

WARNING! This may or may not cause damage to Teflon seals in the airbrush. Use at your own risk!
Станете член на канала, за да получите достъп до предимства:
/ @mmscalemodels
Tools and materials:
AK Interactive BLACK PIGMENT AK039 - amzn.to/3uOd18o
AMMO MIG-3001 Pigments Black - amzn.to/3MfWe3A
Tamiya LP65 Rubber black - amzn.to/3wQMrZa
Mr.Hobby Leveling Thinner - amzn.to/34hRkzH
Airbrush - GAAHLERI Premium Series GHPM-Mobius 0.2mm - bit.ly/mobius_02
Airbrush - GAAHLERI Premium Series GHPM-Mobius 0.3mm - bit.ly/mobius_03
Tamiya 18mm Masking Tape - amzn.to/3Gi2un6
Tamiya Masking Tape for Curves 2mm - amzn.to/3z3RwQN
-- Partners --
Elegoo - amzn.to/3uFLd3y
DACO publications - bit.ly/DACO_publications
DN models - bit.ly/DNmodels
Frontier Wargaming paint chest - bit.ly/PaintChest
Kitmasx - bit.ly/KITMASX
X-tool - bit.ly/X-tool
Hobbyzone - bit.ly/hobbyzone_mm
The tools and materials links in the description are affiliate links that let you help support the channel at no extra cost.
#mmscalemodels #scalemodel #modelairplane

Хобби

Опубликовано:

29 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@xairman565 4 месяца назад

If you’re worried about the two different colours for the wingwalk, remember this, not all wing walk gets replaced at the same time. It could be just touched up in different spots while under way as a way to keep back corrosion. Or worse yet, only paint over bare sections. Corrosion is a big thing on aircraft out at sea.

@MMScaleModels 4 месяца назад

Thank you for the feedback mate!

@DNModels 5 месяцев назад

Nice! Dryer paint usually gets the job done and it is very close to reality in appearance. The grainy texture is there and the surface thickness too.

@MMScaleModels 4 месяца назад

My paints always level themselves :)

@scaleffect 5 месяцев назад

Interesting technique. I think the patchy look is plenty effective given the weathering of said walkways. Thanks for sharing, going to keep this video saved in case I ever get brave enough to try a phantom.

@MMScaleModels 4 месяца назад

Thanks for the feedback mate!

@FinsburyPhil 5 месяцев назад

I've used Ammo's anti-slip paste. I carefully brushed a thin layer over walkway decals on the Airfix 1/48 Chipmunk - worked ok. They have different granularity for different scale effect.

@MMScaleModels 4 месяца назад

Good to know!

@josefberan9786 5 месяцев назад

Looks very good! In such cases i use the oposite part of the mask for "inverted masking" - i glue first the mask itself, then the outer part around it and then peel of the first one. In 0:25 i see your mask has even a pre-cutted rectangle around. You can save a lot of the masking effort this way!

@MMScaleModels 5 месяцев назад

Yup, I used part of the mask surround on the wing. I do not remember why I decided against it for the intake :)

@kiwiruna9077 5 месяцев назад

Another great tip for me to try, Thanks for taking the time to post it. Cheers

@MMScaleModels 4 месяца назад

You are welcome!

@chrisa4603 5 месяцев назад

This is a great tip to do those walkways. Decals out there seem to clean. I like what you did with the pigment.

@MMScaleModels 5 месяцев назад

Thanks for the feedback mate 👍

@lesthiele4921 5 месяцев назад

You sr, are a true master, the thing about this hobby is, what works for one person does not mean it is a perfect method as it may not work for evertbody, your videos are a true inspiration to tonus all, happy modelling friend best regards from Australia

@MMScaleModels 4 месяца назад

Thank you for your kind words mate, cheers!

@nicholasmoore2590 4 месяца назад

A technique that I will try. I think that it's a very realistic, weathered look. This could also be used on modern warships, well Royal Navy at least, as their decks are dark grey non-slip painted.

@MMScaleModels 4 месяца назад

Thank you for the feedback mate!

@WatchMysh 4 месяца назад

Thanks for the tutorial!

@MMScaleModels 4 месяца назад

You are welcome!

@davidrosen5137 5 месяцев назад

This is awesome!

@MMScaleModels 5 месяцев назад

Thanks mate 👍

@lebaillidessavoies3889 5 месяцев назад

crazy this job you did on the tubings of this phantom with all the differents labels and clamps....

@MMScaleModels 5 месяцев назад

Thanks, that will soon be available for anyone willing to print it home... or use printing service

@ModelyGlue 5 месяцев назад

Looks great.

@MMScaleModels 4 месяца назад

Thank You!

@andreamanera6784 5 месяцев назад

I work in the aeronautical industry and I do concur that anti-slip materials are very rough and matt, but I remain convinced that in any reduced scale (at least down to 1:35/32) it should not look similarly rough. Probably a very matt finish for these areas is more than sufficient and appropriate for a scaled down reproduction, particularly if the finish of the surrounding areas is left satin so to be able to see the difference

@MMScaleModels 5 месяцев назад

I get where you are cominf from but I have a theory here 😂. Scateboard grip is 60 grit so if we multiply that by 48 we get 2880. Using my calibrated fingertip I can put the anti-slip at about 2000-2500 grit. For me that is fine enough. Of course everyone can use whatever finds suitable, I am giving a suggestion :)

@sambothefate3462 2 месяца назад

Pigment and paint thats a good idea

@MMScaleModels 2 месяца назад

It works very nice 👌

@sambothefate3462 2 месяца назад

@@MMScaleModels I have been trying to pick up pigment for a while but I don't online shop that much because of shipping costs but I must pick some up next time I do

@fotomakr 4 месяца назад

Looks great Metodi and will try this on my current build which has a lot of nonskid on the wing and boarding ladder. My only question is why didn’t you use the outside of the vinyl mask to mask the walkways?

@MMScaleModels 4 месяца назад

The curve I felt is too sharp and I expected lifting on the inner edges

@alancabrera7116 5 месяцев назад

Nice!!!!

@MMScaleModels 5 месяцев назад

Thanks 👍

@JHartModelworks 5 месяцев назад

very cool

@MMScaleModels 4 месяца назад

Thanks!

@Poopster4U 5 месяцев назад

Awesome, can you create a large amount and store it for another project?

@MMScaleModels 5 месяцев назад

Haven't tried yet. Other than the pigment clumping beyond remixing I don't see a problem.

@gr5535 5 месяцев назад

It looks realistic IMO

@MMScaleModels 5 месяцев назад

Thanks for your feedback mate 👍

@carlsmoot2939 5 месяцев назад

What about a larger needle size in the airbrush, and perhaps increasing the pressure?

@MMScaleModels 4 месяца назад

Possible but I like the control of the 0.2... probably for larger areas like the floor of a cargo plane it will be better to use 0.3

@nikolaosstavrou5327 5 месяцев назад

add a drop of flat varnish also.

@MMScaleModels 5 месяцев назад

Interesting, I consider the walkways dead flat. Do you think more is needed or it is for some other reason?

@nikolaosstavrou5327 5 месяцев назад

the varnish has more resin binder inside, just a drop its ok.

@plumcrazyhemicuda 5 месяцев назад

I think the effect he got is almost perfect. Have to remember that anti-slip is often partially made of rubber compounds and has more of a satin sheen than dead flat.