How to spray paint then bling a tumbler to keep the stones on | Satisfying bling | No epoxy required

Подписаться 55 тыс.

Просмотров 34 тыс.

50% 1

In this tutorial, I will show you how I prep my tumbler, spray paint it, seal it then bling it with flatback rhinestones. I will follow up with how it holds up after my sister-in-law has been using it for a few months. I have included links below for where I purchased my supplies under the bling tumbler category. I used the font called "Honey".
*Disclosure: Some of the links below are affiliate links, meaning, at no additional cost to you, I will earn a commission if you click through and make a purchase.
BLING TUMBLER SUPPLY LINKS
Diamond Painting Trays: amzn.to/333CJEt
Wax pen to pick up gems: amzn.to/3e72F8r
Liquid Fusion (my preference): amzn.to/3e80XUc
Gem Tac (alternate adhesive): amzn.to/3e9LDGy
Tumblers: thestainlessdepotcompany.com/...
Gems: becreateful.com/collections/l...
becreateful.com/collections/f...
Others I've used in my past video: becreateful.com/collections/f...
CROCHET SUPPLY LINKS
Here are some great REMOVABLE fur toppers for a hat, which make it easier for washing: amzn.to/2Hrjo5M
If you would like to purchase a good set of crochet hooks, you can find them here: amzn.to/2Qw4vEK
Stitch Markers: amzn.to/2E6z5PC
Yarn Needle: amzn.to/2U3jGUY
You can purchase similar buttons to what was shown in this video here: amzn.to/2NLZ7M2
You can find the perfect yarn for this project here: amzn.to/2PSVYLM
Thanks so much for watching! If you have any questions/comments, please leave them down below! If you guys enjoyed my tutorial, please subscribe to my channel, give my video a thumbs up and be sure to check out my other tutorials. Happy crocheting, Everyone!
For more information, you can check out my Facebook page at ABCuteCreations or follow me on Twitter @ABCuteCreations. You can also find my free written patterns at www.abcutecreations.com.

Хобби

Опубликовано:

3 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@heatherfennell7917 Год назад

Finally someone showing how to do do the bottom of the tumbler!! Thank you girl ❤

@ABCuteCreations Год назад

I'm SO glad you found this to be helpful! Thank you for watching and commenting!

@tekisha32 2 года назад

Very detailed video. I can’t wait to see the scattered tumbler ❤️

@josiecollado4278 2 года назад

The tumbler is so pretty, thanks for the video

@annastaciaparker2902 Год назад

It is so neat...turned out very Beautiful! Thank you for sharing...

@ABCuteCreations Год назад

Thank you so much! I'm so glad you enjoyed the video! Thank you for watching and commenting! ♥

@user-et1fz9hq4o 11 месяцев назад

Good detailed explanations, I'm just getting started to try my first. Thank you.

@ABCuteCreations 8 месяцев назад

I love it! Let me know how your project turned out! Thank you for watching and commenting.

@jayanderson3630 11 месяцев назад

Just gorgeous

@ABCuteCreations 11 месяцев назад

Thank you so much! It really is so much prettier in person. Pictures and videos can't do it justice. But I love that it's held up so well with lots of use from my SIL and her girls ❤️. Thank you for watching and commenting!

@sharonbryant2068 Год назад

you have done a beautiful job

@ABCuteCreations Год назад

Thank you so much! I'm glad you enjoyed the tutorial! Thanks so much for watching and commenting!

@soniabirthwright Год назад

Lovely ❤️❤️❤️

@ABCuteCreations Год назад

Thank you so much! The cup is still going strong and my SIL still uses it often! I'm glad you enjoyed the video. Thank you for watching and commenting!

@Paulina9080 Год назад

Hola, una consulta espero que me puedas responder después se puede lavar con los cristales

@adinaa6335 Год назад

Beautiful work. Thank you for sharing the videos with us 🌸. Could you tell me what is the size or the model of the Cricut you use for the name decal you use? Thank you so much in advance 🌼

@ABCuteCreations Год назад

Thank you so much! I use the Cricut Maker but you could also use the Cricut Joy, Cricut Air 2 or Maker 3 to cut vinyl, along with many other machines from other companies. Are you looking to purchase a machine to cut vinyl?

@courtneyybarra4000 Год назад

Great video! What is the green thing on the bottom of the pole you used when you spray painted the cup? It looks like some sort of stand. Also, any update on how well the cup has held up since the video has been posted?

@ABCuteCreations Год назад

Hello! Yes, the green part on the bottom is the sand that extends out. Very helpful when drying the cups. The cup itself is holding up great! Almost two years later and all the stones are still on and my nieces love using it! Thanks for watching and commenting!

@jozabedvina3091 5 месяцев назад

What type of glue do you use?

@AF-nu4uv 2 года назад

Hi! Would it be the same process for the reusable plastic 🌟bucks cups? Thx so much! 🤍

@ABCuteCreations 2 года назад

Great question! You have to make sure that it's an acrylic cup, otherwise the stones can fall off. But yes, the process would then be the same. Let me know if you have further questions. Thanks for watching and commenting!

@sylviabrown4792 3 месяца назад

Do you ever sand colored items before applying rhinestones?

@julief634 6 месяцев назад

Lovely!!! how long does it take to do one tumbler like that? Thanks for the inspiration!

@ABCuteCreations 6 месяцев назад

It really depends on the size cup and stones and design you choose. It can take about 14 to 25 hours to complete depending on all those factors. I hope this helps! Thanks for watching and commenting!

@jackiesherburn1730 2 года назад

What font did you use on the name?..your videos are so very helpful! Cup turned out beautiful

@ABCuteCreations Год назад

I'm so glad you found this video to be helpful! I used the font called "Honey". Thanks for watching and commenting!

@dominiquew.8181 Год назад

Where did you get the holder? Perfect tool. Thanks

@ABCuteCreations Год назад

I have two cupholders that I purchased here: www.etsy.com/listing/845675857/angled-cup-cradle?ref=yr_purchases and here: www.etsy.com/listing/845678259/cup-cradle?ref=yr_purchases I love them and highly recommend them!

@diva46226 2 года назад

Thanks for sharing yur talent...Did u do 16 for the name as well

@ABCuteCreations 2 года назад

Hello! Sorry for the delayed response! For the name I used a multi sized pack so I could fit it specifically to the width of the line. Hope this helps!

@linaetabor7930 7 месяцев назад

Can you tell us what kind of glitter you used (super fine, fine, medium, etc). Thanks.

@ABCuteCreations 7 месяцев назад

I used a fine glitter but it's all personal preference, really. You could use a medium or chunky, but you'd want to make sure that you really got the glitter pressed flat and that you sealed it well with clear spray paint. I hope this helps!

@charleneg.4053 3 года назад

Girl you’ve got some serious time and patience 🤣 I think they sell sheets of this stuff.

@ABCuteCreations 2 года назад

Haha, I know, but I like the look of individually placed stones. It's actually quite relaxing....almost like doing a puzzle. Thanks for watching!

@destanier1894 2 года назад

Hi! Can you seal with mod podge if it’s not the spray?

@ABCuteCreations 2 года назад

If you're going to use the traditional modge podge, I would suggest that you let it fully cure so it isn't tacky to the touch before going further. I'd also recommend using the matte version and once it's fully cured you can even lightly sand it so that the rhinestones can adhere better as well. Hope this helps! Thanks for watching and commenting!

@brendaellerridenour9135 Год назад

Very pretty but his long did it take for you to put all of those rhinestones on it?

@ABCuteCreations Год назад

That is a great question! I don't have the exact amount of time but can say that because I used SS16 for this project instead of SS20, it did take a little more time. I do prefer using SS16, however, so it was worth the extra time. I would guestimate it took about 14-16 hours total. I enjoy working on these types of projects while I sit and watch movies/shows so it feels like I'm being productive while just watching tv 😊. Hope this helps! Thanks for watching and commenting!

@WillowQ328 Год назад

Thanks for the tutorial! Doesn’t the paint come off the bottom with use?

@ABCuteCreations Год назад

As long as you aren't soaking your cup (which you shouldn't do with a bling tumbler as it can cause stones to come off), it should hold up. This cup is going on almost 2 years old now and it's still holding up great! I hope this helps. Thanks for watching and commenting!

@jamilastokes1560 2 года назад

How did you seal the tumbler for long time use to protect the stones when being washed?

@beebeej1 Год назад

If you seal it it won't shine...if you use a good glue stones won't come off when washed.

@ABCuteCreations Год назад

Exactly what @beebeej1 said! I didn't see it, just used a great adhesive, took my time and the stones are still all standing as of Christmas! Thanks for watching and commenting!

@kenshin-nz8sy 2 года назад

Hi, can you tell me what kind of glue you use? Thanks

@ABCuteCreations 2 года назад

Yes! I used liquid fusion for this tumbler 😊

@griffinpaschall7301 2 года назад

where did you find that chart i can only find a printable one

@ABCuteCreations Год назад

I think it was only available temporarily. I haven't been able to find it on the site again. I'm so sorry! Hopefully they'll come out with something similar again soon!

@marianaguerrero7946 Год назад

What kind of acetone did you use to clean the inside of the cup?

@ABCuteCreations 8 месяцев назад

I have acetone that I use to remove my polish and dip powder, so that's what I use but you can use Acetone that you get a hardware store as well. I hope this helps!

@angelaglanton8387 2 года назад

Where can I find the tumbler holder thingy?

@ABCuteCreations 2 года назад

You can find the holder and the seller here: www.etsy.com/listing/845678259/cup-cradle

@thelittlesunshineboutique5651 2 года назад

Approximately how much time (aggregate) did it take you from placing the first stone to the last stone?

@ABCuteCreations Год назад

Great question! I believe it took between 14 and 16 hours but I'm not entirely certain. I know that using the SS16 stones will take longer than using SS20s but I preferred the look of the smaller stones in the end. I usually working on bling projects while binge watching tv so that time goes by rather quickly. I hope this helped though! Thanks for watching and commenting!

@linaetabor7930 7 месяцев назад

Where do you get your stones, and how many do you need to do a tumbler like this? Thanks

@luisvilla9074 Год назад

So if you use paint and primer do you still have to use mod podge if i am using jelly rhinestones and resin glass rhinestones????

@ABCuteCreations Год назад

The mod podge spray paint I used was essentially a clear matte spray paint that I used to seal the spray paint color on the cup as well as provide a matte finish for the stones to be adhered to. The mod podge I used on the bottom of the tumbler was only to apply the glitter and therefore, not required. I hope this helps! Thanks for watching and commenting!

@luisvilla9074 Год назад

@@ABCuteCreations yes thank You so much

@ABCuteCreations Год назад

@@luisvilla9074 you're welcome!

@terri8850 Год назад

How did you make the holder for your tumblers

@ABCuteCreations Год назад

I actually have to give full credit to another designer. I found her through a RU-vid tutorial and it was so affordable, I just purchased it off her etsy site instead of trying to make one. I purchased it in two styles. This one: www.etsy.com/listing/845678259/cup-cradle?click_key=961676a0acb0836b0c6a4cb91e9166c92cad16d6%3A845678259&click_sum=47e23262&ref=shop_home_active_7&sts=1 and this one: www.etsy.com/listing/845675857/angled-cup-cradle?click_key=db8c9ce6e049170ecefdafeb663d8e5e732191ce%3A845675857&click_sum=97f6592f&ref=shop_home_active_22&sts=1 I hope this helps! Thank you for watching and commenting!

@amyday2678 Год назад

if you dont have a criket how would you do the name for the cup?

@ABCuteCreations 8 месяцев назад

I would try looking up decals from sellers on Etsy. I bet there are sellers who take custom orders or you could find stickers with names and purchase them to be put on the tumbler. I hope this helps! I'm sorry for the delayed response!

@andriarodriguez5705 2 года назад

Hi do you know if they still have that chart for sale?

@missjoyouslewis 2 года назад

Good question, I’d like one.

@ABCuteCreations 2 года назад

I wasn't able to locate it on their website, unfortunately 😔. It looks like they're switching to these charms that you put together yourself..... becreateful.com/collections/customizable-rhinestone-charms/products/customizable-color-swatch-charms . I thought the color chart was a great idea. Not sure why they discontinued it 🤷‍♀️.

@cariverschueren3833 2 года назад

Where did you get that tray that holds the rhinestones?

@ABCuteCreations Год назад

Hey! I don't have a link to the exact version but you can get something similar (and probably better) here: amzn.to/3kaGcNb I hope this helps! Thanks for watching and commenting!

@AmandaByrd-ey3em 10 месяцев назад

Do you seal the paint too or just the bottom where you did the glitter? I'm about to try my first one 😱

@AmandaByrd-ey3em 10 месяцев назад

Great job by the way!!

@ABCuteCreations 8 месяцев назад

You can seal it with clear spray paint but it's not necessary. You can also epoxy over the paint but the gems will make the cup heavier as it is and so to keep the weight down, I just stuck with the spray paint. I know this was a late response so hopefully you were able to figure something out for your project! I'd love to see how it turned out if you attempted it!

@maiiii7150 7 месяцев назад

How well did this end up holding up?

@ABCuteCreations 7 месяцев назад

It's still going strong! My sister-in-law and nieces use it regularly and it looks fantastic!

@cathyhall7457 9 месяцев назад

How did you make your TUMBLER holder???

@ABCuteCreations 8 месяцев назад

Hello! I purchased them off of Etsy. You can actually find the angled cup holder here: www.etsy.com/listing/845675857/angled-cup-cradle?ref=yr_purchases Or the larger version here: www.etsy.com/listing/845678259/cup-cradle?ref=yr_purchases I absolutely recommend them as well as the seller! Hope this helps! Thanks for watching and commenting 😁

@bella_jfk Год назад

can you pleae tell me how to do the lettering ? i have no idea what i am doing and i dont see anyone explain how to get the letters . i would appreciate it please

@ABCuteCreations Год назад

The lettering I cut out vinyl with my Cricut machine. I then placed it on the cup after I spray painted it and then I was able to bling on top of it. If you didn't want to do a name but wanted to do a saying, you can find a lot of waterproof/vinyl stickers on Etsy, Amazon, etc... and you could bling over those if you don't have access to a cutting machine. I hope this helps! Thanks for watching and commenting!

@jclpuddy 2 года назад

Do you seal it after you are done.

@ABCuteCreations 2 года назад

Great question! You do NOT want to seal it once completed as it will lose its luster/sparkle. If, for example, you were to epoxy over the stones, they lose their dimension and it essentially looks like you just used specifically placed glitter. If you adhere your stones with the proper type of glue, don't soak your cup in water, don't drop your cup, etc... your stones should remain intact on your tumbler. Hope this helps! Thanks for watching and commenting!! 😁

@AmberKatsMeoww 2 года назад

How many packs of the main stones do you use? I bought ss20 as my main stones and the pack comes with 530 gems..

@ABCuteCreations 2 года назад

Hello! I used roughly 3 packs of the be createful flatback rhinestones in SS16 plus a multi sized pack for fillers. You can find the SS16 stones here: becreateful.com/collections/flatback-rhinestones/products/flatback-foil-violet-lavender-glass-rhinestones?variant=12809856647267 It definitely takes a little more than you'd think. SS20 will definitely take up a little more room as well....

@karenpaul4594 2 года назад

What's the font name? Great video

@ABCuteCreations Год назад

I used the font called "Honey". Thanks for watching and commenting!

@MrsDeeLulu 2 года назад

Can you use a gloss spray paint?

@ABCuteCreations 2 года назад

Great question! The stones and glue adhere better to the matte, so that's what I recommend. That's not to say you CAN'T use gloss, just that I feel matte is a safer route for keeping the stones on.

@MrsDeeLulu 2 года назад

@@ABCuteCreations thank you

@mcclarnon1974 Год назад

how's the cup holding up on the stones staying on? thanks

@ABCuteCreations Год назад

The stones and cup are still doing great! I'll try to see if I can do an update video on some of the cups I've made and how they're holding up with extended use. Thanks for watching and commenting!

@mcclarnon1974 Год назад

@ABCuteCreations that'd be great to see, I think it's important and thanks for the reply 😀

@deemarie9616 2 года назад

Id love to know the font of the name 🙏🙏

@ABCuteCreations Год назад

I used the font called "Honey". Thanks for watching and commenting!

@jackierose738 Год назад

Why just not push in the Nerf ball in so far that way you not need tape the ball itself will create a seal around the cup! Maybe that will work better! Thanks so much for Sharing very Beautiful Bling Cup!

@ABCuteCreations Год назад

Yes, that's another good suggestion. I wanted to make sure the cup was secure and wouldn't fall off the stick, which is why I pushed it in as deep as I did. I've since found a great product to use that's silicone and protects the inside lip of the cup (something similar to this: amzn.to/3VTfJAT in case you're interested). I'm glad you like the cup! Thanks for watching and commenting!

@melindakreidler2462 Год назад

What’s the name of the font?

@ABCuteCreations Год назад

I used the font called "Honey". Thanks for watching and commenting!

@renettathornhill5395 Год назад

Hi what's the liquid in the bottle

@jokikem1 Год назад

Acetone

@ABCuteCreations Год назад

Are you referring to the liquid fusion used to adhere the stones?

@erikagarcia5468 Год назад

I would like to know what liquid is used to adhere the rinestones

@honeyhunnitz 5 месяцев назад

That’s my name

@jackierose738 Год назад

Spray paint smells awful there has to be a better option! The smell doesn't just go away! Does it?

@ABCuteCreations Год назад

Another option would be to use mod podge and add a glitter base in the matching color of the stone you're working with. It would also add sparkle in between the stones. You'd want to make sure that it was fully cured before proceeding with the stones. You can always hand paint as well. The risk you run there is having an uneven coat and working around the lumps and unevenness when blinging the tumbler.