Thank you,that was so simple,did the same to another one I had.i bought a scooter that needs a Lil work.think I'll use your page to help me along my way.
Thank you I works , lights are one yeyyyyy, but it won’t start , i need to see what’s wrong . In a women trying to fix it and was so satisfying seeing it light on !! I need my moped to get to work now I need to watch more videos. .
Basic color coding: Red = Power Black = Ground Green = Electrics (Usually connected to the red wire) Black and white wire = Kill switch (Connecting to the red wire should turn the engine off) Take a look at your manual before hooking up wires "blindly"
Hey thanks for the video. The jumper did work BUT I DISCONNECTED IT, and now it doesn’t wanna power up. Could I have blown a fuse, I might have heard something buzz when I reconnected it in the wrong plug spot. Help?
It could be a fuse or it could be something else. Hook it up the correct way, get a 12 volt tester, and follow the wires to find out where the power interrupt is coming from. Hopefully it will be at a fuse. Sorry i couldnt give you a better answer
@@beqweefeus6075 thanks bud, yes it was a fuse. SOLD it as is and got an electric scooter. not as fast and range is not as good, but from A to B, not bad.
Mark, i have a brovo 50cc moped and when i got it it was allready hot wired because the key was lost, the starter was allready out of it and i would use a screw driver to start up, well it quit running one day and i come to the releazation i needed a new cdi boc so i got it one of them but the i noticed that on my starter where theres 5 wires coming out there was one loose so that would bring me to your video here because i was looking to bypass my key switch all together, sence its been wired before i was wondering if there was anything i should know extra about the wireing? thank you for your short but inlighting videoand i will let you know if i got started, and if not i would like to learn ferther from you please, I am a women but i allways do all the work on my vehicals and do know my way around a moped pretty good...lol.. p.s. pardon the spelling is so bad,,,lol Am going to go try it at daylight and will let you know,, Audra
And where do u get those parts that you put on the end of each wire and where should u get that.. I'm so tired of not having the lights working and jumpstarting it.. I'm goi g yo get an ignition too but waiting to get paid
Thieves will steal no matter what. This video was created for the sole purpose of helping people work on their equipment. I am sorry your scooter got stolen, but this vodeo was not the cause of it.
Man u don't have to hot wire shit man listen to me to get gas cap off just pri it off with to big screaw driveers ok an to start it all u need is a dam flat screaw drive an justs put it on key thang an line it up an turn until lights come on ok then u hold front break on it an it will start right up an all lights on it work. U don't have to cut nothing I just use a flat screaw drive to start mine. I got a taotao pony 50 scooter just use a dam flat screaw drive an it will all work. I do it alot an mine runs good do what I said it works
@marksamford8436 Don't listen to these asshat kids. Your video helps a lot. My son is disabled and because of that he lost his ignition key. I have a spare and sent him a copy but the damn place didn't make the key right and he got mad and frustrated and it broke off and is stuck in ignition..I'm 4 hours away and now I need something so he can get it out of the l parking lot because it's gonna get stolen I'm worried..