How to start and prime an old upright airless paint sprayer (Campbell Hausfeld)

Подписаться 759

Просмотров 39 тыс.

50% 1

Let's prime this old airless paint sprayer. These are the steps I take to get this old painter running after 7 years with no use. I also show how to fill it up with hydraulic fluid (see amzn.to/34KWAfI for hydraulic fluid - must be non foaming light fluid)
Or if it's time for a new one, this one is great for DIY'ers: amzn.to/3zQ9C6U
If you need a full rebuild kit, here is the info for the specific sprayer from this video. Be sure to check your own model number to ensure fit before ordering one of these kits: amzn.to/3K4KD4A
Thank you for clicking our links. Some of the links in our description or comments may help us earn a small commission to keep this channel going.

Хобби

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@rodneywright4344 2 месяца назад

Just this week my old pump stopped working. I had it quite a few years and did not want to replace it because it still works great. This was the only video I found which helped me fix the problem. I actually had air in the lines. So by reversing the intake tube and filling it with water and keeping my thumb on it the paint gun began working again. The funnel or turkey baster is not needed. Just pour the water directly into the tube. It's wide enough. Great video. Thank you, thank you, thank you.

@clickapro 2 месяца назад

You're welcome! I'm glad this video helped you get your pump back up and running! Thanks so much for sharing your tip about pouring the water directly into the tube - that's a great hack and could be a real time-saver for others. Here's to many more successful painting projects! Best wishes!

@ipwee 11 месяцев назад

Excellent presentation. My brother (a guy with more money than time) gave me his old sprayer. He used it once to spray the interior of his home and shelved it. Now, I have a clue on how to run the darn thing. Thank you.

@clickapro 11 месяцев назад

Thank you! Congrats on the new/old sprayer! Glad this video helped. It's a finicky sprayer, but it works great once it gets going.

@bostarbird5282 Месяц назад

Thanks for the video. Used my father-in-laws sprayer and it wouldn't work. Followed your instructions and it works like a charm. So thanks again.

@clickapro Месяц назад

That's fantastic! I'm so happy to hear the video helped you get your father-in-law's sprayer working again. Thanks for sharing your experience!

@carolinemiller7774 7 месяцев назад

Thanks for the video! I was given this model and needed help.

@clickapro 7 месяцев назад

Awesome! So glad it helped! We were given ours too! It's an old model, but when it gets going, it's super helpful.

@clickapro 7 месяцев назад

Best luck with your painting projects!

@djraw2158 8 месяцев назад

Saved our life with this perfectly executed and detailed video straight to the point no gaudy music or graphics… Perfect

@clickapro 8 месяцев назад

Awesome! So glad it was helpful!

@clickapro 8 месяцев назад

Thanks for stopping by and letting us know it was helpful

@harryrape8261 3 месяца назад

,😂

@harryrape8261 3 месяца назад

@c❤😂😂Ilickapro

@harryrape8261 3 месяца назад

@@clickapro🎉😂😂🎉😂😂😂

@crawford323 2 года назад

My brother gave me the base model of this sprayer 10 years ago. It had lived under my work bench all that time. The legs were rusted and the blue plastic covering of the hose was brittle and flaking off but because of your instructions I decided to check out the old unit. I began with the fluid and to my surprise, it looked fresh out of the container. I exercised the chEck valve and the rest with good results. Long story short she was up to the task and I painted the bathroom in less than 15 minutes after the prep of course. Thanks to you.

@clickapro 2 года назад

Yes! That's an awesome story! Thanks for sharing! So cool that you were able to get it up and running and get your bathroom painted.

@larryfugleberg1928 3 года назад

This is exactly what I needed to get a used sprayer to finally prime correctly. Thanks!

@clickapro 3 года назад

Yes! That's awesome! So glad it worked for you

@swmiller999 2 года назад

Nicely done! Great refresher

@gstolley 7 месяцев назад

This made my day! Thank you! Finally we got it going!!

@clickapro 7 месяцев назад

Yay! So glad you got it going! 😃

@bigsky2081 2 года назад

Thanks. I've got 2 old sprayers I'm trying to get working. You have given me a starting point.👍

@clickapro 2 года назад

Awesome! Good luck with those old sprayers! I hope they can give you some good service 😁

@kennyjackson1883 Год назад

This video just saved my butt. Thank you!

@clickapro Год назад

Awesome! Glad it helped!

@pianobar7801 3 месяца назад

thanks :)

@crawford323 2 года назад

Great information

@westhornton45 2 года назад

Very well done - very helpful to me. Thank you!

@clickapro 2 года назад

So glad it was helpful! Thank you!

@backyardprojects9945 2 года назад

Good tips, thanks.

@clickapro 2 года назад

Thank you!

@ThelmaBeatrizValenzuelaSotoLad 2 года назад

Gracias 👍😃 la pudimos hacer andar!! No creíamos que algún día la volveríamos a usar. Hicimos lo que aquí dicho y visto y Zaz; ya está funcionando 👏👏👏👏

@clickapro 2 года назад

que bien que esta funcionando de nuevo! Gracias por commentar

@mothman4676 3 года назад

You are a life saver 👍 #thankyou

@clickapro 3 года назад

Awesome thank you!

@yuriynatalya664 3 года назад

i have similar pump. it primes and put good pressure with water. primes with paint ok but does not give pressure. appreciate the tip for solution.

@Mohammad-lf7vb Год назад

Thank you

@clickapro Год назад

Thank you! Thanks for being here

@jackgreene4868 3 года назад

Thank you bro though just saved an Irish man up in Scandinavia 🍺

@clickapro 3 года назад

Yay! That's awesome! So glad it helped

@shariqkudcs Год назад

Where to get the piston for this sprayer do you know a part number to search on eBay? I am thinking to buy one used.

@Shepherdstudio1 6 месяцев назад

Help, what can I do to get the little solenoid moving Minds stuck ??? Trying to make some money, after covid hit I lost my job so now I'm trying to do a side Hustle.

@clickapro 6 месяцев назад

Hey, we have to push on ours with a finger to get it to unstick. If it's really stuck maybe with rust, maybe try spraying it with WD-40 and then wait about 15 min and try pushing on it again.

@toddtramel1989 2 года назад

Koo koo 4 coco puffs. Try primin it before all that. If you have to do that all the time get a graco. When done with a sprayer keep some thinner in pump and line and release pressure when stored. Next time it shud not need primin. Just let it catch up. Been sprayin 4 years. I kno my shit.

@saltyshadow3806 3 года назад

Hey boss... I have the smaller version of the same sprayer. The paint pro 440. Any idea where the filters are on them? If they have? Predicate ya! Video was helpful.

@clickapro 3 года назад

Hey! I don't know that sprayer as well, but this parts diagram might be helpful: www.ereplacementparts.com/campbell-hausfeld-series-airless-paint-sprayer-parts-c-32345_36924_177995.html

@biffbayberry8070 3 года назад

Thank you for posting this! I have the same sprayer and it works great with water but not very good with paint. I think I need to rebuild the pump. Do you have any tips for getting parts for such an old machine? (The previous owner gave it to me because of the pressure problem. I suspect it has dried paint inside...)

@clickapro 3 года назад

Hey! There are rebuilt kits out there like this which I totally plan on doing to mine: amzn.to/3GnwEEV But first I would try: #1 - thin your paint. Most of the time, you have to thin the paint to get it to work. Water-based paint takes water to thin, oil based takes paint thinner. #2 - pop on a new washer at the paint connection. It's the same as a garden hose. Here are some: amzn.to/3ma7Qbm Yes, it's a multi pack, but it's cheap and they are perfect for your garden hoses, washing machine hoses, etc. Great to have a pack of these on hand. Hope this helps!

@biffbayberry8070 3 года назад

I disassembled the machine and saw that there was indeed dried paint in the pump. It took a while to clean, but I think I got it. Thank you for the link to the rebuild kit. I still may need it... ;-)

@clickapro 3 года назад

@@biffbayberry8070 nice! It takes courage to open up an old paint sprayer 😁 I hope it works better for you now with that old paint gone

@iansutube 2 года назад

I am reviving my old Campbell Hausfeld airless sprayer. This video was a big help. I have only used it once before I loaned it to someone and they said it didn't work for them.have been abale to get it primed and spaying water thanks to your video, but the water spray is just not what I expected. It seems that before when i used it water and paint spray differently and when i used paint the spray was fine. Has this been your experience? I also want to clean the gun in the gun where the spring is and I will have to disassemble the spring paint chamber in the gun itself. Have you ever done this? Will a gun from a different manufacturer work with this sprayer?

@clickapro 2 года назад

Yes, you can totally use a paint gun from another manufacturer. I think that water should spray ok through the gun. I havent tried to rebuild a spray gun before, please let us know how it goes if you do.