No video :(

How To Stop Your Solder From Flowing And Messing Up Your Jewellery

Подписаться 138 тыс.

Просмотров 50 тыс.

50% 1

To make solder flow you need a grease, oil and oxide free surface but there are times when you don't want your solder to flow. Perhaps it is to protect a textured surface or even a highly polished one.
Andrew shows you several products from around the home to help with this technique.
This 20 minutes film shows Andrew giving over 30 years worth of experience with plenty of hints and tips that are not written or often talked about.
After watching this film you will be fillled with a wealth of experience to make yoursoldering a more pleasurable and accurate experience.
THE EQUIPMENT I USE TO VLOG
Canon 70D, Body; tinyurl.com/j89...
Canon Lens 10-18mm; tinyurl.com/gnc...
Tripod for Canon; tinyurl.com/hdh...
Memory Cards; tinyurl.com/z8m...
Card Reader; tinyurl.com/z97...
Microphone, Cheap; tinyurl.com/hbx...
Microphone; tinyurl.com/zpj...
Canon G7X Camera; tinyurl.com/jkv...
Tripod for G7X; tinyurl.com/z27...
Mini Tripod; tinyurl.com/he9...
Mavic Drone; tinyurl.com/jfh...
360 Camera; tinyurl.com/jbm...
Andrew shows you many hints and tips that he has gained from his experience as a professional goldsmith.
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website.

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@ny-co3039 Год назад

Everything you teach is spot on! I've tested out so many things I've learned on your channel, and it all works just as you've said👍

@elisabethperdue9667 4 года назад

Very informative & helpful. It’s amazing how one little piece of information can literally save you hours of frustration! I have simply fallen in love with your series! Many thanks to you Andrew. 😊

@WHITTONZ 6 лет назад

thank you for your excellent advice and showing how it's done. I use a very soft pencil (3B) for very fine work as it is easy to apply and remove.

@lenastiward8657 11 месяцев назад

Used as a barrier from solder flowing?

@WHITTONZ 11 месяцев назад

Yes. Exactly so.

@MariaWalker-qo3vi 11 месяцев назад

@@WHITTONZinteresting….

@wordswritteninred7171 5 лет назад

THANK YOU!!! Just found you yesterday. Just found this video. I have a design, for a particular stone, that I have been wanting to make, for over a year now. I cannot successfully soldier it, without the soldier flowing to the outside of the design. I have attempted many different ways. Many different times. All unsuccessfully. I am so excited to finally create this piece!

@johnchristian7520 7 лет назад

Your Commentaries are the very best I have seen/heard for their depth of detail and cautions

@makenchips 4 месяца назад

Andrew, so well done you can also under two walls being jointed scribe lines to act as a moat the material flow into the moat and stop it! Also if you take your solder impounded down to a very thin layer you can control the amount of solder you're putting in the joint better estimation mark you only need a film of solder not a pool to hold excellent video

@tanjuschabartkowski4592 2 месяца назад

Such a helpful video! Without finding it, I'm sure I would have bought something expensive already without using what I have at home ❤ thank you 🙏

@goober650NX 7 лет назад

Excellent video and very clear instructions. How could one fail to succeed!? Thanks for taking the time to upload.

@crystaldennis2744 6 лет назад

I was guided to this site by a fellow jewelry artist that I met in a Denny's in Wickenburg, AZ. I'm so glad I ran into him, and so sorry I didn't get his name. These tutorials are very well done, with clear instruction and excellent video. Can't wait to try out some newly learned techniques.

@HrafnirKrumr 7 лет назад

That is exactly what i was thinking about! Thank you!

@vajake1 5 лет назад

Thanks for posting this. I have a delicate project coming up and I was wondering how I was going to stop the flow of silver soldier on adjacent areas. Bob in Central Virginia, USA

@bjones4097 Год назад

Great demonstration Andrew. I wish I would have watched this yesterday before working on a pendant I was making and had to do some cleanup to remove the solder that flowed where I didn't want it. And, I have three of those items you used at hand. Live, watch At The Bench and LEARN!! Thank YOU!!

@lilyanimate7266 11 месяцев назад

this is fantastic info. very helpful, thank you for this

@gloriaespinosa7826 7 лет назад

Most informative. Thank you. I am enjoying your educational videos immensely.

@carbonsu 2 года назад

This has been incredibly helpful as I have a ring project with 5 embellishments and one of the elements came off 😅 I find thermoflux incredibly messy and makes soldering harder for me. I'll try the rouge next!

@allanjgray1 3 года назад

Thank you so much for these delightful and instructive videos.

@jamesbarisitz4794 5 лет назад

Super tips Andrew! Just starting and love this segment. 👍

@shirleymason7697 7 лет назад

I tell many others about your vids. As well, I have good results with a jar I made up of powdered yellow ocre, mixed with distilled water. Can't imagine that your dime-store tray ocre is really core. But it worked.

@elisabethperdue9667 4 года назад

Such detailed how-to’s actually demonstrated in person. Plus you can watch it right as your doing it yourself-as many times times as you need to. Andrew is a patient and very clear instructor! I would not hesitate to recommend him to any jewelry maker, at any stage of knowledge or experience.

@happybird8157 Год назад

Thanks Andrew!

@allanthompson9695 Год назад

Really really useful. Thank you Andrew.

@ulrichbosman3908 Год назад

Thanks brilliant need to use for my de soldering air sucker solder gun - as the solder is getting stuck inside the solder shaft will try regards ulrich

@evarodriguez5745 5 лет назад

Thank you for this tip, it is very helpful

@texasgigi3684 2 года назад

Great information. Thanks for another very informative and helpful video! Thank you!!

@japerstrills2047 6 лет назад

Good job. Nice info. Thank you.

@tammygurl64 3 года назад

This is a really great demo.👍 I just had to revisit it before I attempt my 3-wire band ring. Thanks! 🙂

@myearthlytreasures3 4 месяца назад

Thank you!!!

@MrKubaitis Год назад

Stands Andrew!!!!

@MrSomeotheruser 10 месяцев назад

Very helpful.. thank you..

@pbjsilverstudio4882 3 года назад

Hoping I can get an answer to this question. What is the best way to remove these resists when done?

@MistiqueMakeup 3 года назад

I wanted to ask the same thing. I tried using white out once, and (may have used the wrong one?) I had so much trouble trying to remove it! I am kind of hesitant to try other things now, incase they are just as hard to get off.

@anandpanchal6390 7 лет назад

thanks to share precious knowledge

@flyingcheff 7 лет назад

Is the yellow ocher the only one of the paints that work? Is it because of a specific ingredient in that particular color? Is the red, Rouge? Thanks, Andrew! Love your vids- especially your fun VLOGS with your daughter and lots of FRUIT! it's clear you are close with your family, that's awesome!

@7DeuceCutty212 7 лет назад

Im a new subscriber! I really enjoy and appreciate your videos. Thx👍🏼👍🏼👍🏼 Excellent.

@autopilotisforlovers 6 месяцев назад

Great video! I have found that all these materials do work well to prevent solder flow, but can be difficult to clean out of the crevices of the finished piece. Any recommendations on removing the cooked-on ochre / correction fluid?

@theswanniesdownunder2417 4 года назад

Hello Andrew, great video! Just wondered before I go out and buy the rouge, how does it clean up and what with?

@booquaresma1 7 лет назад

THANK YOU AGAIN!

@cw2071 3 года назад

Thank you!! A million times thank you!!!

@pamelagorman8091 3 года назад

Thank you

@paulcraddock3818 7 лет назад

Very enlightening video on that soldering technique. But my question is how do you solder next to something and stop the solder melting of the item that is already on your ring (say) .

@leonardpearlman4017 5 лет назад

I think the classic jeweler thing is to use solders of different melting points! Hard, medium, easy... right? If you want to use one solder and not melt one joint by making another one it's a problem, but there are products for that! I think most of them are gels or pastes that take up some of the heat.

@shemhaque2758 6 лет назад

Thank you for this information :)

@fudge90 7 лет назад

Amazing thanks!!

@martybadboy 4 года назад

You're a good educator and presenter. Good job. (And I am a stingy SOB when it comes to praise on youtube vids)

@natmickan 2 года назад

This is brilliant; thanks!

@polygonc 7 лет назад

very useful - I really want to try this now!

@SamanthaHatchett 11 месяцев назад

Thanks for the great tutorial! How do you remove the Red Rouge and Yellow Ochre without contaminating your pickle turning it into a copper plating bath?

@elizabethswindler6099 5 лет назад

Wonderful!!! THANKYOU. Can you do a demo with multiple settings on one ring? And can you demo how to make bevel for unique shaped stones like pieces of sea glass??

@technomama1 Год назад

Fantastic, thank you!

@mary-annkieckhaben5026 2 года назад

cool thank you for shering.

@candaceb.8978 3 года назад

thank you.....

@rwhughes47 4 года назад

EXCELLENT video!!

@TenebraeEques 2 года назад

thanks for the video :D

@westcoastcarver4328 3 года назад

Awesome

@titanbuck7 3 года назад

Love this! So now how could we use this on fixing prongs when a stone is in a ring and it is safer to just add metal rather than take out the stone to work on a bent or damaged prong?

@lynfors3527 4 года назад

This is good stuff.....thank you!

@mary-annkieckhaben5026 4 года назад

Thank you fore you manny work in you Tutorial

@saxofonistacr 4 года назад

Just try painting with a regular black pencil. It worked for me quiet well and there is no cleaning, no fumes nothing. plus you can set your line easily

@laj1285 4 года назад

How easy is it to clean each of these ways off? Is the paint easier?

@windsurfer3329 2 года назад

This is a very informative video. Thank you! I will be using silver solder not for jewelry making, but for robotic apps where the strength of the joint becomes important when torque is applied. Do you happen to know which grade of silver solver produces the strongest joint: hard, medium, or soft? My inclination is that the solder that penetrates deeper into the the native material should make the strongest contact. So, hard silver solder would be my choice. But, I am not sure :-)) Happy new year!

@cindyturner7240 7 лет назад

great Video

@daviddouglas4200 Год назад

Sir, an old trick i was made aware of -- draw round the area with a ( graphite) pencil this will stop the spread.

@dolfinmagikpro 2 года назад

Great information ... Thank you! Quick question ... if I have an existing solder joint that I don't want to flow when I do another soldering step near it, would I paint (let's say the Rouge) over the existing joint to keep it from flowing? Or would I paint around the new joint? Thank you in advance for any insight! As always ... Have a better day!

@swwsociety1877 5 лет назад

Great tip, what's the best way to remove tipex & rouge from metal after. Also where you you buy rouge & borax? (not sure if I'm spelling them correctly?) Thank you

@wordswritteninred7171 5 лет назад

Rio grande

@lenastiward8657 11 месяцев назад

Where do you purchase powdered rouge? Thank you❤

@mehmehmehmeh 7 лет назад

Why you use only yellow? Why other colors won't work?

@Rana.M521 3 года назад

What is the difference between gold, silver & platinum solder? And the process of making jewelry. Please explain. Thank you.

@biriboula 3 года назад

Thank you for you for your help! How do you make the borax paste? Do you mix borax powder with water?

@BuckarooCoyote 7 лет назад

Thank you for the comparative of solutions. After you solder using one of these methods, how do you clean it off? Do you simply put it into your pickle? Will it contaminate your pickle?

@shirleymason7697 7 лет назад

BuckarooCoyote .....water soluble. Wash everything before placing in pickle.

@indira3 3 года назад

@@shirleymason7697 Thank you so much!!! 🙏

@lindavandenberg2067 4 года назад

Thank you for this great tips! How on earth did you find out what worked?

@Atthebench 4 года назад

+Linda van den Berg just various tips I’ve gathered along my journey in jewellery making 30 years experience

@jdhsjjjsjjjjndjsh6515 2 года назад

Just one favor mister! Do not erase your videos from here because today I m not welding , forging but in the future when the need comes up in my life I return back seeking these videos and if videos link won't be working at that time when I will need them mostly , it requires to be my own experimentation and it's required time spending on these things, and time I don't have much, otherwise you can advise me to download the video because I think RU-vid might delete the videos after many years . thank you

@bersisdumann5876 7 лет назад

Andrew hi.., What is your favorite gold and silver solder formula..? Thanks..!!

@babanam1914 7 лет назад

HI, what is the rouge? is that cosmetics? where can you buy it in powder? thanks

@wordswritteninred7171 5 лет назад

I know this is an old post. But just in case others see this, with the same question. Rio Grande, and many others, sell it. Its comes in a block. It is a polish compound. Also, many dremel polish kits, come with a small container of it. Happy creating!

@pijnto 7 лет назад

I notice in your video's that you use, bulky large flame butane torches, what is you opinion of the smith little torch Ifind it much better that the large propane only torch

@cuptonmillerlpnful 5 лет назад

Which is the easiest to clean off of the silver? Ive heard some say the white out is quite difficult to clean off.

@pbjsilverstudio4882 5 лет назад

Now how do you get those various ‘stops’ off of the metal? Can you put them in pickle? Will that clean them off?

@annmark1966 2 года назад

Hey there, how can I solder a jump ring on my silver charm bracelet and not melt the bracelet? Please help... Annie xx

@CarolMinnich 7 лет назад

Excellent RU-vid Video, Andrew. Question - How do you remove the various coatings? Are they equally easy to remove or is one harder than the other? I'm particularly interested in knowing because I just soldered closed some gold-filled patterned wire from RioG to make a bangle. I used 14kt gold solder chips to get a good colour match. Put all gold solder chips on the non-patterned interior of the bangle. The solder flowed perfectly through the joint but some came out onto the front and filled a little bit of the pattern ^%$#. As gold-filled [or I believe it's called gold-rolled in the UK], can be damaged by very vigorous cleanup, I'm wondering if the clean-off of the 'solder-flow-resists' would mar the texture. Any suggestions?

@Atthebench 7 лет назад

The coatings will come off in the acid/safety pickle and with some gentle persuasion with a bristle brush

@indira3 3 года назад

@@Atthebench Thanks a lot!! 🙏

@1827handmade 3 года назад

Will the tipex protect a solder join from melting if I'm soldering nearby?

@garybrownlee7319 2 года назад

What grit sand paper are you using to clean the metal with? I’m having issues getting my hard silver solder to flow properly.

@mexicanstylemodificationan8791 Год назад

If you apply it directly on a solder piece would it prevent it from even melting? Pls help

@Atthebench Год назад

No. It would still melt but the solder wouldn’t flow

@chikezietreasure1916 3 года назад

Please wath are the save chemicals to produce paraffin inhibitors thanks

@rommelangeles3108 4 года назад

Sir andrew how much the mixture/percentage alloy you use in your solder?

@xxxdan82xxx Год назад

Hi, what is this "rouge"? Is this make up rouge or something different? Thank you...😀

@Atthebench Год назад

It is a high polish used for polishing precious metals

@xxxdan82xxx Год назад

@@Atthebench Thank you, Mr. Berry. Really appreciated. Awesome videos you post here, an enormous help...

@lozza1950 4 года назад

Was “ silver solder “ used or “ solder “

@dellagould7430 4 года назад

Can that then go straight into the pickle after you have soldered or do you need to remove any product you may have used?

@Atthebench 4 года назад

Yes just put it straight into the pickle. No need to remove any of the stuff.

@dellagould7430 4 года назад

@@Atthebench Thank you

@kaliymatimothy2581 5 дней назад

hello i like clay to play with

@angelfranco5809 3 года назад

You can use a normal pencil and ill do the job' its more controlable and better option' less stuff to do and buy

@brrjohnson8131 7 лет назад

ok FINE, you win, I'd be an idiot not to subscribe. Yellow ochre, who knew? (yes, yes, YOU did) Saying - Thank You for sharing your vast knowledge with us feels inadequate, so subscribe I will.