How to Strip any Wire quickly and Without problems. TOP 15 LIFE HACKS. 

Genius ideas.Thank you!❤

#12 at time 15:08 is about the easiest one I seen to make and it actually worked

For Romex it's faster by hand but for small stranded wire this is awesome. For sure gonna save a bunch of little stabs by the stands. Cool video

The first one seems the easiest I gotta try that thanks!

Thank you for the tutorial for those of us who work as copper cable finders in empty houses

Thnx bhai app na kaida karaya bhot bhot thnxx❤❤❤❤

Congrats and best wishes.

Genius ideas!! Thank you!!

TOTAL GENIUS!!!!! MORE CRAFTS, PLEASE!!!!!

Tu es un génie merci bcp 😉👍👍

Wooow rewelacyjne pomysly 😊😊😊 Pozdrowionka ‼️‼️‼️

It's the nuts I've spent hours stripping cable by hand wow these hacks will really help me loads 👌 👏THKZ 👍👏

Never seen the cheese grater method before. Interesting concept.

the music was great........

Thanks

U have new su,b bro, good job

Ou trouver vous cette quantité de câble a dégainer, vol dans des bennes ou chantier ??

@50:00 : Why do you want to strip such length new cables?

Witam z Polski bardzo ciekawe pomysły zostawiam suba i łapkę w górę pozdrawiam dziękuję za fajne pomysły

Just got me an 80 PC. Rotatory Tool Kit at Harbor Freight tools for just $9.99 + Tax. The warning reads: "This product exposes you to hamfurl chemicals including led, whic is known to the State of California to cause Cancer..... Well?!, I have nothing to worry about: "I'm in Texas, not in California". King of Copper, Howdy?!... can you make a video of things I can do with a rotary tool kit?. Thanks.

Where can you find all this cables ?

Good

I missed it what do you use to drill the blade

hola ingeniero, el numero cinco es un pelapapas?

Something I've built has some elements from a few of these. I really like the simplicity of the basic sharpened groove straight tool, maybe offset at whatever angle is most comfortable for the user, but overall a safe method if using both hands, the flexibility of the saw blade giving good tension feedback. Some of the designs with the spring and the full length of the blade are foolish, if you are doing something like this with your hands the last thing you would want is an exposed razor slicing your fingers, feeding those mechanisms will teach you quickly. The larger gage wires they are cutting in many segments are very easy to do with a basic knife, use a rubber band or 2 to bind the handle of a pair of pliers, open them to bite one end of wire, step on the pliers and rake a knife or even just a sharpened piece of metal along the length of the wire, it will destroy the coating enough to pull the wire out. You don't need a box or rig for those sizes. That being said, many of these designs have no adjustment dials or very few options for the amount of effort making them. Maybe clever, but the tools where you are fighting your own other arm are poor choices. You will tire very quickly if output is your goal. Being able to pull through a fixed point with both arms, maybe even your back like a rowing motion is a far superior use of energy. The old shaving blade was interesting, like most things the simplest approach is likely adequate. I don't know if those are replacement blades or need resharpening, I haven't seen one in ages but essentially the same method of dragging a knife along the coating (pull sideways, not toward your body). I have a V-cut roller on a bearing with an adjustable blade from the top, blade has a guard through the knife edge to limit cutting point exposure and add stability, block fixed to the top panel with a threaded rod to the side panel for centering fine adjustment. As is my rig uses one hand to feed start and then hold the box and the other to pull the wire. It's a small 8"x8" I can work while I watch videos online. As it evolves I'll experiment with the RPM stable enough to pull wire off a small motor and maybe incorporate some of these guidance methods with the eye screws onto some flaps on hinges with a locking pin.

53:34 Ахренеть! Не проще ли продать провод как изделие? Больше выгоды получить можно!

Where did you find all that copper wire at?

Bon travail

I have a question and what's the videos I see them using shrink wrap shrink tubing as part of their project and they always use a lighter even though it's not their first time ever using shrink wrap and most of their videos always use a lighter why not showing proper tool

:) szacun

😲👍

Good ideas:) However at the beginning, I wouldn't AT ALL condone operating an angle grinder moving toward an ungarded hand holding the work, (esp. when so close as it appeared to me in the vid). Something might slip, colide into that bare naked hand and OWeeee! "Dang that HURT!" could quite painfully result. Some kind of clamp or vice would be a lot better to grip hold the work, while cutting away on it. Safety should should be uppermost in mind when ever operating power tools, is what my book declares. Again good ideas though:) what with the multiple different methods you'd intelligently devised. Think it's always good to have more than one way to strip wire, as only one method may not always work on some, certain kind of insulated wires, well....at least not as efficient so.

I've worked them to death, they work great be gentle with the neck pin. It will break 1st, I just cut the upper part off and keep using.

у меня у одного возник вопрос зачем нужно было портить абсолютно новые провода

Зачем?!

Где проволоку находишь?

Это он еще про спичьки не знает а узнает и жить станет легче изобретатель.и время сберегет и сил.

А многожильный медный слабо?

Что со вторым каналом ?

Every thinking ok, but I dont understand why You destroy new cabels?

Its a very complicated project. Plz make an easy one.

Расскажем ему про костёр?

The crank one is the best. No copper was lost during the stripping. Also put a 12v motor to the crank and you can strip wires all day. No dull blades to be replaced which means lower expense.

👍👍👍👍👍👍👍👍👍👍👍👍👍

А обязательно было брать новое полотно по металлу и портить его?, можно же было и старое полотно испортить на самоделку.🤔😉

Очень долго и нудно, здесь тупых нет...Последние кабеля лучше продать, намного дороже выйдет!

Why on the last one?

I thought number 6 was a failure. You could clearly see that it was not good at stripping wire

Проще было обжечь и не страдать

SAFETY PLEASE on build 6 you drilled a hole through a utility knife with the blade extended. If the drill had binded when you were drilling the knife would have spun around cutting through your fingers. At the very least the blade should have been retracted and really the utility knife should have been clamped in a vice before drilling.

I can do it faster with just a knife!

Anybody got a life hack on building a milling machine?

Идиотизм разбираться провода , если они, как изделие стоят дороже😢

34:33 that look pretty dangerous, i rather have the blade hidden before i start the drilling.

Почти все варианты откровенно идиотские.

阪急5700号車は東芝

I quit watching after #15 , the first one. Try stripping some heaver wire or maybe some wire with some sharp kinks. See how far you get. Anybody can strip small perfectly straight wire and you don't need to spend half an hour making some kind of fancy knife either. How dumb! A simple pocket knife will work just fine or any sharp kitchen knife. This is a TOTAL WASTE of time to even begin watching this.

opreste-te, ai inclus si betoniera😂

4:06

Alo

Fire fire fire

Where do you get all that cable from

Kto nie ma miedzi ten na dupie siedzi ];-D.

😅❤

Method 14, 13 and others similar are weak, they will only work for brand new straight wires (in the case of a bent wire, the bending will cause the blade to cut into the copper and either break the wire or break the blade, and even if not, it will become dull and they will have to be replaced, in method 14 you can't even break off the section because the knife will be too short and you will have to drill and attach a new blade (more fun with replacing than with peeling the wires), these solutions still work for stranded wires, but they are not there may be wires after disassembly because dirt such as dust, sand and cement will quickly blunt the blades. Method 6 is a total misunderstanding, the idea of ​​crushing the wire is absolutely right (it only works with wire), but the quality of the machine and the crank drive are a comedy. And the last method using a concrete mixer is a joke, who peels brand new cable discs that can be sold as a whole several times more expensive than the obtained copper??? Wouldn't it be easier to buy copper rods and pipes in a store and take them from the store to a scrap yard? :P

🎉😢😢😢😮😮😮

All the Crackheads will be watching! 😂😂

Полная хрень этот ролик - воровать провода бухтами, которые дороже продать целиком никто не будет. В 99% случаев приходится снимать изоляцию с кусков провода. Да и чистить одножильные - не такая проблема. А вот многожильные - да, особенно с обмотками из ниток.

😆🤒

Or you can buy a wire stripping machine for about $100

all the stolen copper wires

Работать не пробовал.по помойкам собираешь проволочки и проводочки.не позорся.

Почти все лайфхаки от канала молдавского Mr.theo... жаль, что канала не стало...

Ok. 150 % 👍👍👍👍💪👏🇵🇱🚜👍🤣🤣🤣😅

Ты лучше рассажи где провода и кабель берешь, а разделать мы и без твоих советов сможем.

လှပ်တာနာမလည်လှိ့အသေးစိတ်ပြပေးပါနော်