How To Take Apart The Kabolite 336 Step by Step | Disassembly of the 336gc | 

It's a great looking machine, I purchased one from Ebay nearly 3 weeks ago and it hasnt run through one charge, seals torn up because of metal shavings. Missing two seals at the servos the metal probably had something to do with that. Wire going to battery plug wasn't soldered so that caused a no start , so that was a easy fix. And that screw you had break on you it must be a common thing both of mind broke, the cylinders would never stay up I would bleed over and over and the seller said I didn't have enough oil in it that's why I went inside the excavator, immediately I seen a seal hanging out from under the reservoir lid,I was like yea its ready nope not a chance they stripped one of the hydraulic lines on the rail, so at this time I should have sent it back but I've had several excavator and I'll fix it the main problem was the clean up on the pump gears and body they left all the burs. So if you buy one and you start having problems take it back. This excavator looks like this was there first time building it 6 ot of 8 hydraulic rail bolts we're lose where it bolts close to pump. Lack of experience was the main problem. So I'm going to buy a new pump and set up for this.

Picking up this unit this week!

Great video! Thanks.

WOW What an amazing in depth video man. I just bought one of these i am so glad this video exists. Fantastic job and very much appreciated sir.

Great work

maquina sensacional

Really interesting and sharp video !!

thank you very much!

Hello from Germany, how can I adjust the valve angle and valve rotation on the remote control?

These look amazing for the price, how does it compare against the more expensive excavators, thanks

Really nice metalwork and details, like the 1/50 display models. A bit 'boring' that as this is regarded a mid level' model, they just give you a 1/16 (great along with Bruder naturally), not a full size 1/14 to match Tamiya. It would had cost quite few bucks extra to make it full-size, but that's their chioce. The chinese still got a way to go with hydraulics, and avoiding the cheapest electronics in their models, but within 3-5 years we will possible see another level of quality at this price point. More and more companies jump into this over there, which is great

mate this is such wonderful video excellent touch But i'm sorry i have no huina Kapolite excavator But i have a request that i hope you will fulfil can you make video about rc faroe track loader cat 953c how to change the ESC that my wish please thx my mate have a good day🤗

Great!!! Will u make also a video of disassembling the track of kabolite?

😀

very good video with many important information, because i own this beautiful excavator since 5 month, but first i had very less information, manual was very small(FM-Electronic), about servicing the hydraulik, changing hdoil and so on. I have yet the problem, that pressure of boom and arm is not stable, its slowly sinking, when pump does not run. Several other comments say, that is because pump is not running and its normal, but i believe , that valvepositions are not exakt, do you have more information or tipps for that problem? thanks

Hi. Great video! I have a question, can I change the LI-ion battery with Li-Po on this machine? Of course if I found the same size of the battery. Is the battery voltage 7.4V?

I've been reviewing this vid several times as it seems I'm going to have to do this on my brand new machine. The boom lift cylinders leak down quickly and some other hydraulic circuits when activated cause movement in another (it could be lack of skill with the sticks). Anyway you commented to be sure to replace the filler cap to prevent a great mess, what I am wondering is if I need to drain the tank in order to dismantle the pump and blocks without creating a mess? It seems to me that the oil would flow out the ports once they are opened.

Hey what type of hydraulics oil is use for that machine an where can I get the it from? Great video am catching up on all your videos

questo modello può lavorare con lipo 3s 11.1V?qualcuno ha mai provato?perchè ho problemi scarsa pressione soprattutto sul pistone della benna

Hi, I saw in a comment that you modified the battery housing at accommodate a gens ace 7.4v 2s 5000mah shorty lipo. What was involved in that? I recently ordered a 336 (has not arrived yet) and I need a few spare batteries. I'm having difficulty locating factory kabolite batteries in the US. What connector is on them XT30? Any aftermarket batteries you recommend that would fit? Thank You! and great videos!

The reciever Is positive at the top of reciever or bottom I'm seeing red and black in same slot

another great fun and interesting video. I did miss the video yesterday,😋 normally I always watch the live stream on Sunday afternoon. (Holland)😀supper nice that you also got a model from xtreem rc. to be able to teach someone else something like that. I hope to get something like that someday. or something smaller.🙈 thanks for the video.

Hey I have a question I am hoping you may be able to help me with ... I have noticed my hydraulic oil getting quite warm / hottish when working the machine hard in hot weather ... and i know it will more than likely be fine .... but I love tinkering / modifying (and this is a Hobby, right?) ... so I have bought a small 2" x 2" oil cooler, with a fan on it, and im wanting to add it into the hydraulic system ... my question is ... does the oil always flow from the tank to the pump in 1 direction? And if it does ... do you suggest I put the cooler between the tank and the pump, so it cools the oil before going through the pump? Im thinking this would be best to have the oil cooled as much as possible before being pumped through the system. Thoughts?

I put a slightly bigger lesu bucket on mine. Any hope for upgrading the pump to a stronger one? Or is this pump style proprietary? im not to familure with these yet. thanks

Anyone know how to increase the pump pressure?

Are you aware of boom and arm sag issues?

what socket type the battery using? xt60 or xt30?

Do you know where that I can find its pump ? My pump pinion damage !!

Salve, io ho un problema con questo modello, il problema è che quando alzo il braccio principale questo scende da solo . Non ci sono perdite il modello è nuovo. Cosa può essere. Grazie

How price ,sir..?

hello dear friend, towards the end of the video i realized that a boltwas breaking on the dispenser so my question is have youmanaged to extract the rest of the bolt in the other parts thanksbecause i have the same problem