How to Take Apart your Hot Wheels Step by Step 

God I wish they would make it simple for us and just put two screws on each end. Phillips But no they want to make us struggle.

Imagine putting mini hydraulics inside 😂

hey! as a fellow hot wheel customer i just wanted to let you know that the mini pilot holes are also to put a screw into :) it makes it much easier to thread it

the pre-drill is to drill the post and tap in treads to add screws for refitting body to chassis and easyer for future customising

Anybody else notice that he was drilling in reverse.

When you have more chunk of metal on one half of the rivet than the other, you know that you're in trouble; I experienced this a few times myself. It's a pain....

Great job! It’s not easy and it takes practice. Well done👊🏻

Dude you definetly *USED A HAND DRILL*

I left my like and my comment because you just gain another subscriber great video man thank you for sharing from California a huge hello to you man

My thumb is now bleeding uncontrollably and my hot wheels is now on the other side of my room

How do you put it back together though ?

Skiff ykk in the cut 👀

The best tool to use would be a small drill press from Harbor Freight and have a small vice attached to the work table. You would be able to make clean straight holes.

A small carbide ball or carbide drill bit works best and will eat that metal up. If you customize alot it's worth the money and keep it cool with some oil or even just water.

Fun fact You can use the cheapest drill with a good name brand drill bit and you will enjoy this hobby more. Please don’t use cheap harbor freight drill bits.

Skuf ykk sheesh that’s a gem right there 🔥🤘🏼

Bit size 1:54 I agree but only tried once.

Now I have learned there is a ring and to drill straight. Instead of sitting I think now I will use a table to get a straighter drill movement. Thanks man.

Good job it really helped!

But can you put the car together without it falling apart?

You sure make something that easy look hard.

Thats boring but still luv it

over 8 minutes long to show how to drill the 2 screws out???

That skufone throwie tho

Congratulations for 970 subscribers

Power is NOT everything! I have been getting better results with a hand driven drill bit in a hand grip than a drill. As for your tool of choice in the video congratulations getting one that worked. I bought the same one from good old Harbor Freight and it would NOT even power up! The worst part is when I returned it the guy looked surprised that I actually expected it to work.

Wohoo!

I have a small bit, and it’s good to get started, but it doesn’t get any bigger

come on guys we need to get this awesome guy to 1000 subs we can do it

Time to prove my parents wrong

Are you suppose to drill into the car or pulling it out?

YOUR DRILL BIT IS >> Dull >> *It, Needs Sharpening. My drill bit takes about 3 seconds...

You definitely need to learn how to use tools before doing a video, never grab the business end of anything, and then you had your bad on the power end, and that razor, take care of that cars paint when taking it apart, even if your going to repaint the body you still don’t want scratches in it. And I hope your wearing glasses of some sort.

Enjoyed the vid

Where’s the mini one that was inside

Hi. I recently got into this hobby. I borrowed my dad's Dremel to open up my rx7 but it doesn't seem like I'm making any progress. I also asked my dad to help me drill but he also made no progress. If anyone knows what's wrong, I would really appreciate it if you could tell me how to do it correctly. Thanks.

You need a sharper bit for starters, wholy crap! and a cordless drill.

Really 9 minutes to drill out two rivets 🤦🏽‍♂️

I dont have a drill the only thing i have is a few pack of scredrivers and 3 glues

Thanks so much i bought a hot wheels and it was like tilted of the base

I want to do a repaint on two old dairy deliveries the blue buggs bunny and the white York peppermint. 3D Botmaker sent me to other channels to learn

I just purchased a Dream Van XGW. Rear tires aren’t the best, and could stand replacing. This only has one clear bit on the underside.

Hmm. 🤔 5/32. Got it.

Use a heat gun from harbor freight you heat the pin and they come off neatly

I thought your video was great. The only question I had was how do I know if I have a metal or wood one? I have some hard time opening mine and I had a drill

Thx bro

9 64 srill bit

Got a Hotwheels the other day, very nice body with a nice shade of green and tons of stickers, how I like them. But the seats are banana yellow, and so effin ugly. It's a single piece of plastic, as usual, so I just wanna paint it black, or even tan, but banana yellow is just too much.

Also just starting out. I HAVE a drill,& I can tell you,it ain't easy,AT ALL‼️😒 Is your,umm,"DREMEL",cordless?🤭🤔

i have the same hot wheels as the video

Nice skuf sticker, that's a gem💎🔥!!

What brand of drill bits??

and how can i do for remake it. _.

you crazy yes

Can i do this on a normal hot wheels which isnt custom?

So a "Drill Master" is not a drill, but a Dremel. Got it.

am i the only one how tries to take it apart by my teeth and my nails

Gosh, that dremel is loud!

How can i take apart my lionel racing car?

Nice man

Who else drilled through the bonnet

Mine doesn't get apart

What type of drill did you use

👍👍👍💯

#usescrewforhotwheels 👇

How do you put it back

You can use a dremmel, but at a lower speed., on this video it was too fast.

Exacto

Latest Video with Updated tools. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BtWV7Ct8jbg.html

This car is a plastic body with plastic base?

This man take so long i wish there was a more simple way

Waaaaaay too much backstory and unnecessary info.

This video could be thirty seconds.

Yeah that's what happened to my sports gruppo car

Can u post a ling to the dremmel please?

Привет круто. 👍👍👍👍

What do you write??

Do what you got to I take mine's apart with a screw driver

*So you get your 17 inch 500 dollar drill*

Does it click on

I got hot wheel car

Why do u wanna take apart ur Hot Wheel

you talk to much just do the job!!!

Are you gonna do a corvette??

They’re called rivets. And they suck. I restore real cars for a living and I encounter them on some stuff.

MATE! what the fUK waz that!

What #

Which dremel?

But yet again how do you put it together!😂

When you were a kid and did the water bottle thing with your bike 3:29

Can you you yous Anything else

P

Please use some of your RU-vid money to buy a drill

I destroyed my nissan skyline by trying to put nail polish on its tailights tried to remove then with vipes and it destroyed one of my shinning rim, I am deviated that nissan skyline from fast and furious was a rarer piece...

Oi

You talk too much before doing anything lol

Stop

U talk a lot