LAHORE CANTT.
If you need any type of welding here we are.
Since 1980 HAJI ARGON WELDING WORKS.
TIG Welding Stainless Steel: A Step-by-Step Guide
TIG welding, or Tungsten Inert Gas welding, is a precise and versatile method often used for stainless steel due to its ability to produce high-quality welds with minimal distortion. Here's a breakdown of the process:
1. Preparation
Clean the Workpieces: Ensure the stainless steel surfaces are clean and free from contaminants like grease, oil, or rust. Use a wire brush or degreaser for thorough cleaning.
Choose the Right Tungsten Electrode: For stainless steel, a pure tungsten electrode is typically used. The size of the electrode depends on the thickness of the material being welded.
Set Up Your Welding Machine: Adjust the amperage and frequency settings according to the material thickness and desired weld characteristics.
Shield Gas: Use pure argon or a mixture of argon and helium as a shielding gas. Argon provides better arc stability, while helium can improve penetration.
2. Starting the Arc
Strike the Arc: Touch the tungsten electrode to the workpiece to initiate the arc. Once the arc is established, lift the electrode slightly to maintain a consistent arc length.
Add Filler Metal: If necessary, introduce a filler wire into the weld pool. The filler wire should be the same grade of stainless steel as the workpieces.
3. Welding
Travel Speed: Move the torch at a steady pace to create a consistent weld bead. The travel speed will depend on the material thickness and desired weld penetration.
Filler Wire: Feed the filler wire into the weld pool at a controlled rate. Avoid excessive filler metal, as this can lead to porosity and distortion.
Arc Length: Maintain a short arc length (typically around 1/16 inch) for optimal penetration and control.
4. Finishing
Ramp Down: Gradually reduce the amperage to cool the weld and prevent cracking.
Post-Flow: Allow the shielding gas to continue flowing for a few seconds after the weld is complete to protect the hot metal from oxidation.
Additional Tips
Back Purging: For critical applications or thick sections, consider back purging with a shielding gas to prevent oxidation on the backside of the weld.
Pulse Welding: For thin materials or to reduce heat input, pulse welding can be beneficial.
Practice: TIG welding requires skill and practice. Start with thinner materials and gradually work your way up to thicker sections.
16 окт 2024
