How to Transfer Windows from SSD to NVMe M2 for free - Tutorial 2023

Подписаться 69 тыс.

Просмотров 151 тыс.

50% 1

Today I'm going to show you how to transfer your Windows from an SSD to an NVME M2 for free without losing data, im using BalenaEtcher software for free.
If your Windows 10 or Windows 11 is running slower than you'd like, than upgrading to an NVME M.2 drive , this can help to increase your system's speed and performance, with read and write more than 3 Gbps.
Easiest way to transfer Windows from SSD to NVMe M2 for free → bit.ly/48MbihL
Download BalenaEtcher at: balena.io/etcher
In this video, we'll guide you step by step through the process of cloning your existing C:/ drive to a new NVME M2 SSD.
You'll learn how to test your current SSD speed with CrystalDiskMark, and also prepare your M.2 NVME with a PCIe adapter, to connect the NVMe SSD M.2 and place to your computer,
If your PC doesn't recognize your NVME SSD, we'll show you how to set it up in the BIOS.
Using the free software BalenaEtcher, we'll walk you through the cloning process, and then you can remove your old SSD C:/ drive. You'll then test your new NVME M.2 SSD speed with CrystalDiskMark and create and format a new partition with unallocated space.
Chapters:
0:00 Intro
1:47 Test SSD Speed with CrystalDiskMark
2:51 Prepare M.2 NVME with PCIe Adapter
5:30 Connect NVMe SSD M.2 on Computer
6:17 Check if nvme ssd recognized automatically from PC
7:00 Setup on BIOS when pc not recognizing nvme ssd
8:00 Cloning process using BalenaEtcher balena.io/etcher
10:44 Remove old SSD C:/ Drive
11:08 Test NVME M.2 SSD Speed with CrystalDiskMark
12:15 Create and format a new partition with unallocated space
12:39 Outro
💣New Method: How to Clone Windows from SSD to NVMe M2 using Clonezilla for Free - Full Tutorial 2024
• How to Clone Windows f...
You Must Watch Next:
👉 How to Extend Partition after Cloning A Smaller Disk - 100% Free Method
• How to Fix SSD Disk Sh...
By the end of this video, you'll be able to migrate your Windows operating system from SSD to NVME M2 for free and experience faster speeds and improved performance on your PC like you never see before
Download BalenaEtcher at: balena.io/etcher
Accessories:
👉 M.2 NVME to PCIe 3.0 x4 Adapter with Aluminum Heatsink Solution
amzn.to/3IO5DN2
👉 Crucial P3 Plus 1TB PCIe Gen4 3D NAND NVMe M.2 SSD
amzn.to/41RAdhB
👉 The Fastest M.2 NVME Today with 7,4 Gbps Speed
SAMSUNG 990 PRO SSD 1TB PCIe 4.0 M.2
amzn.to/3yglxej
👉 iFixit Pro Tech Toolkit - Electronics, Smartphone, Computer & Tablet Repair Kit
amzn.to/3F47mNr
👉 RGB Gaming UtechSmart Large Extended Soft Led Mouse Pad
amzn.to/3YlvF00
👉 Patriot P210 SATA 3 1TB SSD 2.5 Inch Internal Solid State
amzn.to/3SWcMzu
👉 AKG Pro Audio K92 Over-Ear, Closed-Back, Studio Headphones
amzn.to/3YqZ88M
#howto #windows11 #technology #nvme #m2 #tutorial

Хобби

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 405

@Tips2Fix Год назад

👉Easiest way to transfer Windows from SSD to NVMe M2 for free → bit.ly/48MbihL 💣New Method: How to Clone Windows from SSD to NVMe M2 using Clonezilla for Free - Full Tutorial 2024 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfWmUuWRM8I.html 👉 How to Fix Cloned Hard Drive Shows Wrong Size for Free 2023 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html Accessories: 👉 M.2 NVME to PCIe 3.0 x4 Adapter with Aluminum Heatsink Solution amzn.to/3IO5DN2 👉 Crucial P3 Plus 1TB PCIe Gen4 3D NAND NVMe M.2 SSD amzn.to/41RAdhB 👉 The Fastest M.2 NVME Today with 7,4 Gbps Speed SAMSUNG 990 PRO SSD 1TB PCIe 4.0 M.2 amzn.to/3yglxej

@smarthalayla6397 Год назад

Thanks for the video but the problem with windows installing on NVME M.2 SSD on laptop with intel processors from generation 11 to 13 are not eternified both by windows 11 and windows 10, and the needed files to upload during widows installation were deleted from intel website. Show us how to solve this issue please.

@animejr.6951 4 месяца назад

What will happen to the other ssd? Is it emty?

@MeowTechCam 2 месяца назад

@@animejr.6951 no it’s the same. You gotta come back and reformat the old drive to blank

@mojoje8191 Месяц назад

Not is for free, is too expensive. For free is a big lie.

@drunkntigr 11 месяцев назад

This was so clear this guy should get a medal. Been doing hardware for 25 years and his explaination was really good

@Tips2Fix 11 месяцев назад

Thank you for your amasing comment 🥰

@DivyangM 8 месяцев назад

I agree, also the fact that he showed a free way is great. I've seen other videos that show the apps that ask for premium when you actually try it. They never mention it in the video and waste your time. So thank you for not doing that.

@thisisyaren 3 месяца назад

Yeh I agree, been doing hardware for 30 years myself and this is a solid straight up tutorial on how to do this ... Legendary stuff and doesn't go on about nonsense!

@AG0024 День назад

Im New Yeah he very forward and simple and when it comes to computers sometimes the simple explanations is best, at least for me

@bdaoutdoors Год назад

surprisingly, this was the only video i found after several hours that understood exactly what my issues were and addressed them perfectly. thank you

@Tips2Fix Год назад

Thank you for this amasing comment

@Trieds Год назад

im hoping the same here

@dzcasanova8840 Год назад

What issue you had ?

@movieRFP 7 месяцев назад

etcher won't see my c drive. what should i do?

@simple_story 9 месяцев назад

Thanks man, without any problems cloned the system and all the files to new SSD m2. Everything works good, all the licenses connected perfectly as nothing was changed :)

@Tips2Fix 9 месяцев назад

Good to hear , enjoy ! did your replaced with the same drive space? Or this new m2 its biger ? If its biger make sure to extend the unallocated space using this method ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.htmlsi=8sn1EOJ2UPlSZ16Q

@nrabinov 11 месяцев назад

This was very good tutorial on how to upgrade your SSD. The only part that didn't work for me was the Balena etcher software. However, Macrium Reflect worked like a charm. Thank you!

@TheJohnpants 6 месяцев назад

30 years in IT and I never knew you could put smaller pci-e devices in to the larger slots! 😮 Would have made my designs a lot easier over the years! Thanks.

@Tips2Fix 6 месяцев назад

Glad I could help! How to Clone Windows from SSD to NVMe M2 using Clonezilla for Free - Full Tutorial 2024 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfWmUuWRM8I.html write me email and i will provide you with EaseUS Disc Copy license okay?

@seanryu5214 7 месяцев назад

Very helpful video thank you. I’ve been waiting weeks for my new pc parts to come in and I have everything except ssd, coming a week later. I decided I’ll just reuse an old ssd and put in the new ssd later. 😊

@PathfinderKat 8 месяцев назад

So many videos had "free" programs. Turns out they aren't so free. Best tutortial!

@Tips2Fix 8 месяцев назад

Nice , yes this method works great Thank you for your comment

@jdmusicproduction9062 9 месяцев назад

Super easy and works great! Thank you!

@Tips2Fix 9 месяцев назад

You're welcome!

@ryuavincaux 11 месяцев назад

to whoever will encounter the same issue as me that the m2 drive disappeared from diskmanagement, that's normal. because it has the same id after cloning the boot drive. all you have to do is to remove the old drive and use your m2. that's it. thanks for this video, helps a lot! i can now use my m2 nvme2 as boot

@Oblivionze 10 месяцев назад

Wait, what if i just want to switch os to nvme but i want to maintain the ssd too?

@viridisgaming7376 10 месяцев назад

@@Oblivionze This is what im trying to figure out as well

@frederick4186 9 месяцев назад

@@Oblivionzeany solution for this?

@ViezeVingertjes 8 месяцев назад

@@Oblivionze Would use gparted or any live linux distro you can boot from USB and format it in there. That should do the trick.

@pasajejayt.844 5 месяцев назад

@@Oblivionzemaybe you try use enclosure and change the Drive Letter Path

@7Im8O66 Год назад

Thank you my friend! 👊🏼

@Legitshocky 7 дней назад

Thanks mate, very up to the mark and crisp informative video.

@Tips2Fix 7 дней назад

@@Legitshocky nice bro thank you for your comment 🤗

@SrinivasBulusu 6 месяцев назад

Love your presentation style and content ! This has been very useful. Appreciate your response to my queries. Cheers !✌

@Tips2Fix 6 месяцев назад

Glad it was helpful!

@jamiepstables 4 месяца назад

Thanks a lot. This worked great! Can I just add my SSD back in and use it for storage of photos/videos? What would I need to do to get it working as a storage drive?

@MrYoso-of3wy 6 месяцев назад

Thanks bro, works like a charm... i followed your tutorial it runs smooth like a silk without any problem....✌😊

@Tips2Fix 6 месяцев назад

Supper enjoy , yes this method its easy and free

@gr2262 11 месяцев назад

I'm working with an extremely slow HP 22-c0063w all in one and it is at flashing 0% around 40-45mbps and ETA at 375m to transfer to my Samsung 970 evo plus 1tb M2 drive...am I doing something wrong??

@SilverLightningXV 6 месяцев назад

So when you transfer the data does it just transfer windows or does it transfer everything on the drive? I know this might be self explanatory but I'm a very cautious person with my data and wish to double check just in case

@zayrul Год назад

Thank you very much for the tutorial. Very clear and easy to follow. Now my new m.2 nvme can run boot with windows 10. Before this I headache how to clone with free method.

@Tips2Fix Год назад

Yes and ser this video if you lose some space on new drive ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@gebah_afb 8 месяцев назад

and after that you can even unplug the old hdd where windows was installed, and use the new one completely?

@leonelgarcia7327 9 месяцев назад

Thanks a lot for this information I'm in the same situation. With Balena Etcher you made my day!! I have still free an PCIE 3.0 x 16 free, ¿do you think M.2 will run faster on this or on a PCIE 3.0 x 8?

@GeorgeNadaYT 10 месяцев назад

Great video. Just one question. Will the PC automatically boot from the new drive or do we need to assign it as the boot drive in bios? Thanks again for this comprehensive video.

@mehmeh_ 4 месяца назад

Most likely you will have to assign it, in case that happens make sure your usb drive is ready with windows

@sabihashamim2185 Месяц назад

Thanks a lot This video helps me a lot 😊 Very nice and easy process Thanks ❤

@Tips2Fix Месяц назад

Amasing you are welcome my friend

@MusashiW-ec2yn Месяц назад

Very informative, and useful. Thanks for your video and help. Process worked, without error. Great tips.

@Tips2Fix Месяц назад

Glad it helped!

@randomvariable9783 11 месяцев назад

IT WORKED THANKS SO MUCH

@BMJMediaLLC 10 месяцев назад

I was able to boot up windows after it had to run a repair. But ultimately got in using only the new drive. I have a problem where my start menu gives me a critical error and wants me to sign out each time I touch it

@drewg3087 9 месяцев назад

What happens when i boot up computer and my motherboard or windows doesn’t recognize my new m.2 ssd? I only have 1 ssd slot on my motherboard so there is no way to have 2 ssd in the motherboard to clone. Id have to clone my drive to external and boot under external ssd at boot but that work either. So i cant use my m.2 2tb ssd now. Fml

@Docillamanilla Год назад

Thank you! This video helped me alot

@Tips2Fix Год назад

Youre welcome my friend

@RealRayAl 6 месяцев назад

Ok so i tried using an adapter with my m.2 and balena etcher only showed my m.2 not my other system drive so i installed the m.2 directly on mother bored and now its saying plug a source drive. Any idea?

@josejavier2360 Год назад

Thanks for the video, very nice. Thanks.

@Tips2Fix Год назад

Nice if your new ssd was biger than the older one and you see that size of new ssd its the same like the older one than try to use this method to extend it i did this video How to Fix SSD Disk Shows Wrong Size after Cloning (100% Free Method) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@naomialexis1842 Месяц назад

If i don't have an extension but instead use an external drive to migrate windows there then later to the new nvme m2 ssd, will my other files on my external drive disappear?

@darlingtoncd 6 месяцев назад

Excellent tutorial...thanks👍

@Tips2Fix 6 месяцев назад

Glad it was helpful!

@Conley1 8 месяцев назад

after i clone my c drive to my new m.2 i cant see it in my file explorer and if i go into my disk management it asks me to repartition the drive, is there something im doing wrong?

@AG0024 День назад

Love the video! getting Samsung 990 pro for my Aorus b650 elite ax ice motherboard was going to go with Gen 5 but for the price of the Gen 5 I can get 2tb Gen 4 990. My Question is.. So i have Sata SSD, Why can I not keep that for my OS specifically and use my 2TB M.2 for gaming and faster load times? I'm new to pc gaming by the way. A friend said i have to install the windows OS on the M.2 Where ill be loading and downloading games on

@PigsTravels 9 месяцев назад

i want to just take the os and move it over to the nvme ssd i dont want to tansfer all the files i only have 500gb nvme ssd

@PabloIify 3 часа назад

thank you so much... for devoting your time and loving us this much..

@Tips2Fix 3 часа назад

It's my pleasure Thank you for your comment bro

@Dr.Hypersonic 3 месяца назад

excellent tutorial .... saved alot of my time .. i extended my cloned nmve memory capacity with AOMEI software to its fullest capacity ... thank you once again....

@Tips2Fix 3 месяца назад

you are welcome my friend thank you for your comment

@Zain69z 7 месяцев назад

amazing tutorial. very easy. no questions asked by me.

@Tips2Fix 7 месяцев назад

You are welcome bro

@HiHi-zj8ve Год назад

Hello..i got a problem with my JVC HA-A6T, so when i get both turned on they get connected but I can't hear in one ear..they both work but I can only hear the audio in one ear.

@Tips2Fix Год назад

make sure that you have clean up the microphones , if microphone its blocked than it will not work because noise cancelation option its not working well see this vide as well : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d4Lj_tasb-k.html

@IronX-ct6sp Месяц назад

Very detailed explanation, Thank you!

@Tips2Fix Месяц назад

You are welcome

@s7_44 5 месяцев назад

Yo man when I open the cloning app it says the ssd is “lovked” and won’t let me select it

@FracturedReality Год назад

You put out some of the best videos, i'm just getting around to cloning my M2 drive and I just found out that Windows 11 is blocking Balena Etcher.EXE, the file will not execute instead I receive a message asking to use another program to open it up. so I tried Macrium Reflect which is also a cloning tool and I received the same message., have you encountered this problem before and is there a fix. thank you

@Tips2Fix Год назад

I just read your messages , i will test today Balena Etcher Exe with windows 11 and come back to you with another answer

@FracturedReality Год назад

Just a courtesy message I had left the post on the clone app that was being blocked, I solved my problem it was actually downloading the wrong version, you may want to add in your video if an app does not load it may be due to the version that was downloaded in my case it should have been the legacy version. Yes I realize this is a rickey mistake but it's a good information for people to avoid the problem that I had. P.S. M2 drive works great 👌

@Tips2Fix Год назад

Thank you for your comment my friend Im using M2 drives and i like it , now im makins some tests with M2 Ride 0 😃

@paul-br2fs 8 месяцев назад

i have bin chewing on for the past 3 weeks tracing and trying to get passed the blue screens of death and fails fitting a samsung NVMe.2 using there migration tool i was resigned to starting from scratch with a clean install fingers crossed it worked and had 0 transfer issues and the nvme has bin running with no BSOD well done 👍👍👍

@Tips2Fix 8 месяцев назад

Im happy to hear that you did it, so now if your new m2 its biger than the old one you maybe need to see this video How to Fix SSD Disk Shows Wrong Size after Cloning (100% Free Method) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@paul-br2fs 8 месяцев назад

@@Tips2Fixthank you for response over a day 0 problems and i have mirrored the hud to an older drive so my ssd will become my games drive . i have looked at resizing and have put a copy of both the details and a copy of both programs into an archive file as it was ssd- nvme.2 to use as my new c drive and both were reported as 500 gb i was surprised to see near 19 gb left but its actually useful i keep copies of all my manuals for hardware and games dating to late 1980s there backed up on usb thumb drives separate from my external hdd backups i am very good at double backing up things so if i get a terminal problem i have more than 1 safe backup of everything .

@YousefMostafa96 Год назад

Hi, I have a problem with the method, whenever I hit flash, my NVMe m.2 (the target) disappear from the pc and i had to initialize disk again via disk management, do you know what i'm missing here?

@ryuavincaux 11 месяцев назад

that is normal, it happens because the source and the target have the same id, all you have to do is to remove the source drive. and use your new drive (m2) as boot

@justonsiu00 Год назад

when im cloning my harddrive it keeps popping an error saying( Looks like etcher is not able to write to this location of the driver. This error is usually caused by a faulty drive, reader, or port. please try again with another reader or port. This nvme is brand new i just got it installed today.

@NightNurse3711 День назад

Can i then move my m.2 to a new pc. Plug it into the new motherboard and be good to go? Also currently stuck on 37% flashing 😢 not moving. If i cancel it says it may break my m.2 ssd

@PigsTravels 9 месяцев назад

i have a 500gb will thi still work

@Murrflex 10 месяцев назад

Do you have to remove the source drive once the flash is complete? I still want to use my SSD as a separate storage. Thanks so much!

@Tips2Fix 10 месяцев назад

Remove to test it if everything looks great with new one , after reformat it the older one and use it as storage. If your new cloned ssd its biger than what it was you have to watch this video also: if it shows wrong size ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.htmlsi=Em7C74qSX6zadm73

@reymarkdavid767 Месяц назад

How to fix this, after it got cloned then i remove the previous ssd, my pc turned into blue screen and said recovery

@Luke-jq5ke 7 месяцев назад

I’m trying to go to a smaller drive from a 2tb to a 1 tb and the old 2 has only 500gb on it but etcher won’t go to the 1tb because it says it’s too small Ben though there is enough space

@Luke-jq5ke 5 месяцев назад

Ended up buying another 2tb m.2 so now I have 3 tb of m.2

@reeyees50 Год назад

Worked for me thanks bro

@Tips2Fix Год назад

Supper , thank you for leting us know , enjoy new speed of your pc . If your new ssd m2 was biger than the older one than make sure to see this video :How to Fix SSD Disk Shows Wrong Size after Cloning (100% Free Method) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html to encrease the unallocated space

@xxTestMeX Год назад

Can I do this and keep my other m.2? I just wan't to clone it to my new m.2 and boot windows from it, I just need to select in bios after doing this right? At the end I can just format my old m.2 right? Please tell me if I'm wrong!

@Tips2Fix Год назад

Yes exactly , this new one its biger one or smaller capacity?

@iZiLiFE-jg1nc 7 месяцев назад

thank you dude ❤ , but why you don't use the Acronis version that come with crucial products

@Tips2Fix 7 месяцев назад

Yes thsts right you can use it for sure

@mubingaming721 4 месяца назад

Hellow sir, I have a problem I using Sata ssd 120gb but not enaf spaces for me so i buyi 500gb Nvme M.2 ssd. How To sata ssd to transfer c drive Nvme ssd without any partition / i need full nvme like c drive. How to do ????

@liamh6906 Год назад

I followed to the letter, cloned from hard drive to SSD. Would not boot from the new SSD. Ive been trying to change BIOS settings, ive gone through virtual repair, nothing works. I can't even use command line to clean disk in order to re-clone or just make a fresh install. I'm having an attack right now cause I just want to fix this, I've been working on it for a day now.

@Tips2Fix Год назад

try to see your ssd with www.partitionwizard.com/free-partition-manager.html try free version and check and see if your ssd its listed and create new partition. let me know

@casgem 7 месяцев назад

why can't balena etcher app can't see my drives

@EXSwitchback Год назад

Followed this carefully, cloned my drive, but when I went to boot cloned OS from the target NVME It says the BCD is missing or contains errors. I removed it from motherboard to boot from my original OS drive again, but the same error occurs and my Windows is now non-booting. I've tried Windows repair, BIOS boot priorities, and Command Prompt to try and rebuild and repair but no such luck. Can you offer any help? I don't understand how the original SSD I cloned is now failing to boot since all it was was a copy. Another note, but I blue screened simply installing the NVME because apparently some motherboards have so many SATA Port lanes, and the new drive wouldn't register in BIOS until I removed another device. (I had 3 drives and a CD/DVD which took up all spaces.) This is something barely explained with this process, and stopped me booting into my Windows as well. I've had nothing but trouble trying to move my OS. I hope someone can help, my PC is a glorified brick right now.

@joecanada777 Год назад

Unfortunately there's a boatload of options not mentioned here. BIOS options for uefi, drive type in windows (mbr, etc) . Sorry I can't help just telling you the issues I am also running into

@Tips2Fix Год назад

Here is the video to convert to uefi ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DEieycANIc4.html

@nizuuuuuuu Год назад

I've just run into the same issue, did you have any luck fixing it or getting around it? I feel like I've tried everything

@EXSwitchback Год назад

@@nizuuuuuuu Hi, afraid not. I ended up doing a clean OS install on my NVME, then used Windows Explorer to find my old OS, programs and files and re-install or move items from the old SSD to the new OS NVME. This probably isn't what you want to hear, but on a positive note a fresh OS install is a great thing to give longevity to your PC. I also didn't lose any files because while Windows wasn't booting off my original OS, all my data was still there and visible. It could have been much worse. Still don't know why the original OS failed to read though. I urge anyone trying to clone to READ THESE COMMENTS because frankly this video is misinformed and is causing damage. I hope the author puts some kind of disclaimer up in the description because clearly it's not as clear cut as it's made out to be.

@arbenbejtullahu4010 7 месяцев назад

Can You Please help mee i did from ssd i cloned to d and then restarted and i still have ssd and the D is missing and i wanted to be all in D so ssd to be empty please help

@jeremybrown4003 8 месяцев назад

I did this and now it has added a system reserve E: and a local disk F: and I am so confused all I wanted to do was switch windows OS over to my nvme. I didn’t realize it was going to delete everything off the nvme

@adisadoci6412 Год назад

Good job 👍🏻

@Tips2Fix Год назад

Thanks ❤

@TRIPP093 19 дней назад

So what do i do with the old ssd after cloning? Am i able to reconnect and delete the files on it to use for more storage

@Tips2Fix 18 дней назад

Yes you can use old SSD as D Drive yes you have to format it

@andrewglass8046 7 месяцев назад

I did everything just like you said and when I went back to put my old storage back in I cannot boot anymore. And now taking it back out I still cannot boot?

@Tips2Fix 7 месяцев назад

Did you replace old hdd with new ssd right? Try to run F12 during startup and choose your new ssd for booting

@jont9058 6 месяцев назад

Great job!

@Tips2Fix 6 месяцев назад

Thank you! Cheers!

@nicolasgil8766 Год назад

Is it possible to to still use my old sata hard drive for more storage? Or would I have to get a new storage device?

@Tips2Fix Год назад

You can use your hard drive yes as a second drive you have go format it after you are done cloning and make sure everything works well

@georgeshaw6207 Месяц назад

Superb Video !

@Tips2Fix Месяц назад

Thank you very much!

@bayuseptian6264 Год назад

my ssd samsung 870 evo still pretty fast so i don’t need to replace to nvme

@rickyguerra7205 5 месяцев назад

I tried to clone from my c drive to my nvme ssd and it erased everything i had on my nvme ssd and didnt clone anything onto it. I had to create a new volume in disk manager to even see my nvme again. Now any games that I had on my nvme are gone and programs i had on there cant find their location. Please help.

@Tips2Fix 5 месяцев назад

Aww did you chose as source empty drive? Thats the reason im saying be carefull to chose the source the original drive older one and target the new one

@sleeplessnight5238 Месяц назад

can i still use my old sata drive and have it still installed when i move my O.S. to the new drive?

@Tips2Fix Месяц назад

You can have your old drive , you can format it wipe it out and keep it as D:Drive Make sure that your computer working well with new ssd and after reformat the old one

@bradg5060 10 месяцев назад

How can i format my original drive? Anytime i enable it in the bios the system automatically boots to it? I have seen others ask the same question, but have not seen an answer.

@bradg5060 10 месяцев назад

I followed everything. Got the drive cloned. Tested thoroughly and everything worked great. I then formatted my old c: drive. Now i cannot boot the newly cloned drive. In command prompt it was now listed as g: drive. I tried reassigning to c: but i am still not able to boot. I'm not very happy. I shouldn't have fone this nonsense. My ssd was fine. What a waste of my time. I feel like smashing my pc with my axe and fml!!!

@dzcasanova8840 Год назад

Hey friend , would this piece of software allow to only clone a partition of where my OS is to the new disk or I should clone the whole disk with all its partitions to the newer drive ?

@Tips2Fix Год назад

I sugest do a entire disk cloning like im doing and than after manage partitions on new drive with Minitool partition for free How to Extend Partition after Cloning A Smaller Disk - 100% Free Method ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@dzcasanova8840 Год назад

@@Tips2FixOkay I will do as suggested , but I want to mention that I'm more conserned about old drive , for exemple if I clone my whole old disk "drive" to the new nvme drive and then boot from it then I guess I need to format the old drive , but I'm worried that I still can loose data and game saves which I don't want to happen even if I manage to clone everything safely , and also I want to keep a partition in the old drive a.k.a I actually only want my system os to be booted from a faster drive and that's it ... One more question please generally it's recommended that the source should be smaller than the destination what if they are both the same size like in my case they are both 1Tb ?

@mirnaim6678 Год назад

hi , after doing the whole process , it looks like the new m2 ssd doesn’t have anything in it surprisingly . Is it because i have to remove the old ssd first?

@Tips2Fix Год назад

Yes try to remove the older one and try to boot up with newer one , dont format the older one yet make sure that everything works well

@okabija1 7 месяцев назад

Hi, I followed the steps but ran into a problem now. I managed to clone the disks, disconnected the boot drive but it still didn't boot (got message no proper boot device connected or something). Then I connected the boot drive back and could see both in disk management. Also, changed in Bios old boot drive to be secondary, after that my pc is not booting, asking for repair... I tried to do many changes in bios but nothing... I have one backup on an external drive but I think I rather need recovery USB to fix the boot. Boot is on both but old one alone is not booting anymore even when nvme is disconnected.. Is there any fix?

@Tips2Fix 7 месяцев назад

Connect it both and try to boot for each one use F12 during ristart and you will see boot-order menu and choose drive to boot up

@thankamanivimalanandan4484 Год назад

Can I do the same with hdd to nvme ssd

@CoPrivateDev 6 месяцев назад

thank you so much ♥

@Tips2Fix 6 месяцев назад

You are welcome :))

@xarDreV Год назад

Hey, iam going from SATA SSD to M.2 SSD. My old SSD is 1.02TB and the new is 1TB Balena Etcher wont let me clone it because its too small. Could you help me?

@Tips2Fix Год назад

Can you try something? Use Minitool partition freeware software And make C partition A little smaller than try to clone again., i didnt tested and i dont know if it will work but you can give it a try Normally new drive need to be larger that the source one See this video how to use minitool ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@Cogglesz 5 месяцев назад

hey does this work with two M.2's? I took my old 512gb laptop one out a broken 2017 laptop. It's been running my main OS since. I've always held off since these hardware clone tools are just crazy expensive compared to SATA drive hubs. Thanks i finally ordered a 2TB 980 Evo and i hope it all works out. My work and computer are tied together.

@Tips2Fix 5 месяцев назад

Yes it will , try this method , but you also have this new method: How to Clone Windows from SSD to NVMe M2 using Clonezilla for Free - Full Tutorial 2024 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfWmUuWRM8I.html if you need license for EaseUS write me email to tips2fix@gmail.com

@Cogglesz 5 месяцев назад

@@Tips2Fix Thanks for the comment with more info! I'll Definetly Email you! I've used EaseUS in the past i'm sure but i don't think it was even my own computer! I'll check for a license of my own first :) Thank you so much though, hope to hear soon!

@sherekhan3991 Год назад

After i remove the hdd driver ( the old one ) it's say's "Reboot and select proper Boot device or insert Boot media in selected Boot device and press a key"

@Tips2Fix Год назад

Hmm go to bios and set bootable order the new drive usually F2 , or Delete or Escape keys when you turn on your pc

@hyblitz7646 10 месяцев назад

Very Nice tutorial, the best i found so far, just still confused in the source and target part ? so if i want to clone my SSD = F to Nvme = E, the source should be F and the target should be E right ?, i really got confused at that part sorry :')

@Tips2Fix 10 месяцев назад

Yes thats right , source is the SSD that its full with files your system etc… so its source In the other hand target its new ssd that you bring , that you are trying to make the clone and make the same like your source Be careful dont chose as a source empty ssd because will destroy every thing 😁 After you did cloning right than watch this video to fix the spaces How to Fix SSD Disk Shows Wrong Size after Cloning (100% Free Method) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@hyblitz7646 10 месяцев назад

Man Thank you so much that was quicker than i expected, I will check it out for sure ! thank you so much again ❤🙏 @@Tips2Fix

@accxmplice 8 месяцев назад

@@Tips2Fix i followed the steps exactly but when i try to select the source, my C drive doesn't say source beside it. so i was cautious not to destroy everything on it. Is there a way around this? i would really like to utilize my new m.2 speed.

@twixxtro 7 дней назад

can you do this from hard drive to m.2

@HollyWoodKill9 11 месяцев назад

I don’t see my drive C where my windows is installed in balenaetcher please help :)

@Tips2Fix 11 месяцев назад

Intersting how its posible , send me a screenshot what you are seeing at , tips2fix@gmail.com

@Finnishguy777 3 месяца назад

Great video for sure, just one question what if my m2 drive already has three games installed in it, can this be done at this case too`?

@Tips2Fix 3 месяца назад

Yes this is clone process and will be exactly the same

@Finnishguy777 3 месяца назад

@@Tips2Fix Thank you for the answer

@shmooflz 10 месяцев назад

I just want my OS on a faster nvme but I still want to keep my other nvme as storage, will it erase everything on my old nvme?

@Tips2Fix 10 месяцев назад

Yes for sure you can use tour old ssd Clone old one system to new one , after that make sure everything its done and system works great than after format the older ssd and keep it as archive See also this video How to Fix SSD Disk Shows Wrong Size after Cloning (100% Free Method) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.html

@MusashiW-ec2yn Месяц назад

I have a question if anyone could answer speedily please. Am I now safe to reformat my old SSD, into a spare drive without it affecting anything? Or should I use it as backup?

@Tips2Fix Месяц назад

if the clone process its done and you are able to run from your new ssd , than you are good to go and format the old hdd or ssd and use it as archive drive D: to make sure you are running on new ssd please remove old ssd and turn on your laptop

@MusashiW-ec2yn Месяц назад

@@Tips2Fix Thanks. 👍

@Wolfiegangs 7 месяцев назад

So my situation is I have a new Nvme. I have a HDD installed. I want the files in my HDD to go to my Nvme. However I want still want to keep my my HDD for big files. After cloning From HDD to Nvme do I simply keep the HDD in? Would it be empty after cloning?

@Tips2Fix 7 месяцев назад

No HDD will be untouched so Did you cloned yet?

@Wolfiegangs 7 месяцев назад

@@Tips2Fix Yes I was able to clone, but I wasn't able to boot from clone. Yes, I changed the boot order and it would only crash if I booted from the clone. The files were identical.

@SumAintRightYT 6 месяцев назад

So your telling me that if i take EVERYTHING from my sata ssd and switch it to my nvme my whole pc will run smoother? For me personally ive been running sata as my boot with windows and my nvme for everything else. Should I switch?

@Tips2Fix 6 месяцев назад

It's definitely worth considering! NVMe drives have faster read and write speeds compared to SATA SSDs, so transferring everything to your NVMe drive could potentially improve overall performance. Give it a try and see if you notice a difference! this is new video that i did for the same topic ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfWmUuWRM8I.html

@bautistajellmaffiem.3409 8 месяцев назад

Once cloning is done, would the computer recognize the new (m.2) ssd as the new bootable drive? Cause i'm not planning to remove the old ssd as ill make it as a reserve drive.

@Tips2Fix 8 месяцев назад

Yes it will but for the moment after cloning remowe the old dont format it yet , pc will recokgnise the new one as a c drive than , when you see that everything its okay than format the old one and use it as archive

@Tips2Fix 8 месяцев назад

If new drive its bigger than the okder one make sure to see this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.htmlsi=zpfUeCATiQqlcla3

@jsvphz 6 месяцев назад

After removing the old drive and booting on the SSD, can I still plug the old one back in and use it for storage?

@brenncruz9773 6 месяцев назад

Pretty sure u can still use it as long as ur motherboard recognises it 👍🏽

@willjah958 9 месяцев назад

Worked for me. So do you just reinstall the original ssd afterwards and then format it?

@Tips2Fix 9 месяцев назад

Yes i did reinstall original ssd and keep it as archive drive. If your newer drive its bigger than the one that you replaced with (older original one ) make sure to see this vodeo also ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4ke3_FeB8wQ.htmlsi=Y3IdgB1IsGE7LZ5F

@joannabacanto1608 Год назад

Hi I'd like to ask something I just bought the exact same nvme as yours (Crucial p3 plus) and ive been seeing a lot of comments that It's not recommended as a boot drive. should i buy a seperate nvme for OS? or is p3 plus not that bad as some people make it seem?

@Tips2Fix Год назад

Look formthe moment in my PC for drive C:\ its exactly the same model that im showing on the video. And its bean exactly from the moment that uploaded this video till now and i dont see any problem :)

@frassmangamer 7 месяцев назад

Great video, when I put my M.2 into the slot and turn my PC on, it goes to the screen which says Press F2 to setup etc but will not go past that screen AND they keys will not work on the keyboard. Cannot go into bios or boot menu. I removed the new M.2 and it works fine but when I put the new M.2 in, nothing loads up and will not let me enter boot menu, it's stuck. Help please

@Tips2Fix 7 месяцев назад

Did the cloning process finished without error? When tou add m2 drive you have to select to the bios or F12 during reboot and select the m2 to boot up your pc from

@frassmangamer 7 месяцев назад

I have found a solution which I am trying now. I read online, someone has the same brand motherboard and is having the same issue. He had to update his Bios and it worked. My motherboard is ASRock if this helps anyone else.

@frassmangamer 7 месяцев назад

@@Tips2Fix the computer does not leave the first boot up screen after fitting the M.2. When removing the M.2 it's fine again. Others have this issue, one said by updating the Bios it will fix this issue

@Mo-elbo Год назад

I can clone just the system ( windows) not all the data ?

@Tips2Fix Год назад

you can clone everything , with etcher nor problem, drive to drive will be clone the same files

@timmygriffin8543 3 дня назад

So i restarted and it looks like nothing was cloned... Any idea why?

@braydenrice2319 9 месяцев назад

My computer now blue screens and I can't start it from "bad_config_settings

@G_Binze 8 месяцев назад

Can I do this using an m.2 that always had files in it? Or do I need a clean m.2?

@Tips2Fix 8 месяцев назад

when you do cloning using this method it will format the new m2 and will be exactly with the system drive

@TheJacobi 9 месяцев назад

is it possible that this can corrupt data?

@Aryalmiah 8 месяцев назад

I cloned it to my nvme and i shut down my pc and took the ssd out and now th pc isnt working. Im being sent into the windows teoubleshooting window

@carl2143 Год назад

cool vid!

@Tips2Fix Год назад

Thank you for your comment 😍

@1982Clarkey 7 месяцев назад

If I clone my drive to the new nvme m.2 ssd but can’t remove the old ssd how can I get windows to look at the new one so I can format my old one?

@Tips2Fix 7 месяцев назад

wait dont format it yet , please remove old hdd first and try to boot up your pc from new ssd and lets see after that you are free to format older ssd or hdd , make sure everything its okay

@1982Clarkey 7 месяцев назад

@@Tips2Fix oh absolutely Thankyou

@drazikenn Год назад

I'm currently following the steps

@hmm-really 2 месяца назад

Worked ?

@drazikenn 2 месяца назад

@@hmm-really I don't remember if it was this video because I watched multiple videos and it worked after many tries and methods

@hogman3543 4 месяца назад

I have 1tb ssd which I shrinked to clone to a 512Gb ssd gives me error can't clone to 1tb

@Tips2Fix 4 месяца назад

Use this method ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfWmUuWRM8I.html write me email and i will provide with 1 license : tips2fix.com/contact/