How to set Filters and Gains on a Car Audio Amp to avoid clipping

Подписаться 2,9 тыс.

Просмотров 7 тыс.

50% 1

Understanding filters and setting gain on a car audio amplifier. DaBadNewz.com
Down4Sound JP284: www.down4soundshop.com/down4s...
Deaf Bonce Apocalypse AP-M67AC - amzn.to/47mAN8E
bigjeffaudio.com/products/pai...
Multimeter: amzn.to/3xVG8Yp
Previous videos in this series:
Pt.3 - Amp + Speaker Install: • Deaf Bonce Door Speake...
Pt.2 - Deadening Doors (Again): • Sound Deadening my Doo...
Pt.1 - Boom Mats: • Do Speaker Baffles mak...
~~~Referral Links~~~
Amazon Storefront: www.amazon.com/shop/DaBadNewz/
Auxito LED Headlight Bulbs: www.auxito.com/Xr1hbrh7XP45PI
Big Jeff Audio: bigjeffaudio.com/?ref=DaBadNewz
~~~Contact~~~
@DaBadNewz
Instagram: / dabadnewz
Tiktok: / dabadnewz
Email: DaBadNewz@DaBadNewz.com
We'll be discussing High Pass Filters, Low Pass Filters, what the Slope of the filters are, and how to set gains using a multimeter.
Thanks for watching! Hope you enjoyed and consider subscribing to watch more!
0:00 - Intro | What is this video about and how will it help you?
0:59 - What is tuning an amp? What does it mean to tune an amp?
1:13 - What are the different settings on a car audio amp?
1:41 - High Pass and Low Pass Filters explained. How do you set HPF and LPF?
2:31 - What is the Slope (of a filter)? What setting should it be at?
3:21 - What does the multiplier switch do?
3:39 - Gain explanation - How amp gain works
4:13 - Tuning DaSlapBox
4:27 - Deaf Bonce Arnold AP-M67AC recommended filter settings
4:53 - Down4Sound JP284 filter clicks explained and set for Deaf Bonce Arnold 6.5s
6:21 - How do you set amp gain with a multimeter? (the math)
6:59 - Setting gain with a multimeter (in action)
7:59 - 1kHz Test tone for midrange speakers
8:17 - Test track peak numbers explained - (0dB, -1dB, -5dB)
8:53 - Why does a -10dB test track make an amp louder than a 0dB test track? (-10dB vs 0dB)
10:10 - Thanks
•••SUPPORT THE CHANNEL•••
Some links below are affiliate links, meaning I earn commissions on qualifying purchases at no extra cost to you.
~~~Coupon Codes~~~
(Use my coupon code at checkout. You get a discount, I get a commission. It's a win win!)
Auxito LED Headlight Bulbs: DBN15 (15% off) www.auxito.com/discount/DBN15...
Big Jeff Audio: DBN5 (5% off) bigjeffaudio.com/discount/DBN...
~~~Popular Videos~~~
• Build and Install 1/0 ...
• Install Pioneer Head U...
• Do Speaker Baffles mak...
• Installing 80 mil Soun...
• Subwoofer Box Build fo...
• Installing a High Outp...
• How to Spray Paint Pla...
• Deaf Bonce Door Speake...
• Installing Fog Lights ...
~~~DaSlapBox~~~
2011 Scion xB
Audio:
Head Unit: Pioneer AVH-2600BT
Subwoofer: Fi BL18 • Subwoofer Box Build fo...
Subwoofer Amp: Sundown SCV-1500d
Subwoofer Speaker Wiring: 8ga OFC SHCA
Subwoofer Terminal Lugs: 8ga Copper Lugs, 1/2" I.D. amzn.to/3YN0qg7
Door Speakers: Pioneer TS-A1684R A-Series 6 1/2"
Power:
Alternator: Mechman 240A
Power/Ground Wiring: 1/0 OFC SHCA
Power/Ground Terminal Lugs: Riocan 1/0 AWG Ring Terminals
amzn.to/3YJ2wO2 (1/4, M6)
amzn.to/3YGFcRa (5/16, M8)
amzn.to/48g5KMR (1/2, M8)
Acoustic Treatment:
Sound Deadening: Noico 80 mil (Doors+Panels, Roof, Floor, Trunk, Center Console, Pillars) amzn.to/47HpadN
Closed Cell Foam: Noico 315 mil (Floor) amzn.to/47DomXs
Sound Deadening Roller: Lumiteco Bearings Equipped Sound Deadening Roller amzn.to/3P4bylv
Lights:
RGB Strips: ELLights (Footwells, 2 rows under sub box, under amp, around amp rack) amzn.to/47JN8VJ
Fog Lights: Auxito Q16 H11 LED Bulb, tinyurl.com/H11Q16
Low Beams: Auxito Y19 H11 LED Bulb, tinyurl.com/Y19H11
High Beams: Auxito 9005/HB3 LED Bulb, tinyurl.com/Q169005
Brake Lights: Phinlion LED amzn.to/3YZ6jap
Reverse Lights: Phinlion LED w/ Projector amzn.to/44nGOAq
Turn Signals: Phinlion LED amzn.to/47yp3kG
Dome Light: iBrightstar 31mm LED amzn.to/3P5wPeE
Map, License Plate, DRL: iBrightstar Wedge LED Bulbs amzn.to/3qFV6i4
Junkyard Finds:
Daytime Running Lights from 2013+: • Installing Fog Lights ...
Foglights + Switch + Grille: • Installing Fog Lights ...
JDM Toyota Rumion Tail Lights: • Installing JDM Tail Li...

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@jacobscott1347 3 месяца назад

Hey man great pointers I designed the all down4sound amplifiers. I just wanna tell you you most amplifiers don’t offer bandpass that’s the 1x & 10x switch. This is the best video I’ve seen on the Internet regarding how to tune an app in a long time grade job if you need anything reach out

@DaBadNewz 3 месяца назад

Oh shit!!! Whoa man much respect!! Thanks for doing what you do man, I love the features on these. And that’s a really big compliment, especially coming from you. I really appreciate you taking the time to check it out and leave feedback man, your word carries weight out here! Have a great one!

@PeterFeltersnatch852 3 месяца назад

@@DaBadNewzi just subbed... ditto... Great video you def did your research and enjoy this. How old are you? Children be over 25... Well keep up the good work, do what you do bud!!! 🙏🙏🙏

@DaBadNewz 3 месяца назад

Thanks man! I really appreciate the sub! And I DO really enjoy this stuff, it’s part of my career and my life at this point! And as for my age, I’ll be 35 next month.

@PeterFeltersnatch852 2 месяца назад

@@DaBadNewzi was gonna comment on new video of your buddies car... But you have comments disabled

@DaBadNewz 2 месяца назад

@@PeterFeltersnatch852 oh shit good lookin out! Definitely missed that one!

@sethgt1234 3 месяца назад

You simplified it and explained this better than I have ever heard anyone ever before. Amazing job!

@DaBadNewz 3 месяца назад

Bro that’s a big ass compliment! Thanks man! I really appreciate the feedback

@zakuraayame5091 3 месяца назад

Good News Everyone! More of DaBadNewz is here.

@DaBadNewz 3 месяца назад

Let em know!

@NorthLVLowRoller 3 месяца назад

One of the greatest RU-vid videos possibly.......ever. 😉

@DaBadNewz 3 месяца назад

trying to come for Mr.Beast with this one lol

@maplesgamer378 3 месяца назад

Found you today and have been watching a few of your videos. You shared some amazing info, I had to subscribe. Love the way you approach the topic.

@DaBadNewz 3 месяца назад

That’s awesome! I really appreciate that! I’m still trying to figure out how to make these videos so that feedback means a lot.

@virginiamira1856 3 месяца назад

Great video. Very detailed, and loved it when you would hold your sub over your shoulder with a big grin. That’s classic. Keep the videos coming. Thanks

@DaBadNewz 3 месяца назад

That’s that Bass Smile! Thanks for noticing! And thank you for checking it out and leaving feedback, I really appreciate it, and comments like that are super motivating.

@rogersingh3918 3 месяца назад

Bro, you were loud, clear and straight to the point. I would say this is the best amp tuning video, subbed.

@DaBadNewz 3 месяца назад

I really appreciate that man! I’ll try and make sure I keep that high standard

@CALL_AND_BARGINS Месяц назад

You are amazing. Always had an interest in speakers and amps, primarily analog electronics. Your channel explains this stuff in an easy to understand way. Thank you.

@DaBadNewz Месяц назад

Thanks for that feedback! Really happy to know that people find my videos useful.

@toysforboysrc 3 месяца назад

I rarely subscribe after 2 minutes of content but it don’t take much to acknowledge knowledge.

@DaBadNewz 3 месяца назад

Well I definitely appreciate the honor of the quick sub! And thank you for the acknowledgment. I really wanted this one to be pretty informative, so that feedback means a lot.

@drewleon6217 3 месяца назад

Thanks for your helpful video. It was down to earth and straight up. More power to you 💪

@DaBadNewz 3 месяца назад

Thanks for the feedback man! That’s exactly what I was aiming for so I’m glad to know it worked out.

@fredleeman8186 3 месяца назад

Bro, you always have great content. I am now late going to bed because I’m watching this is you that’s the bad news the good news is I learned how to tune my channel amplifier.🎉😂

@DaBadNewz 3 месяца назад

Thanks man I really appreciate that feedback, I'm glad you learned something. But don't stay up too late, you can just watch more tomorrow!

@rubenflores2870 3 месяца назад

Hey bro great job 💯💪. I've been waiting for this video from you 🙏. You explained it very well, and in detail 💯🔊. Thanks again for the help. Keep doing what you're doing bro 💪 💯💯🙏🙏

@DaBadNewz 3 месяца назад

Hey man thanks for helping to inspire it! Your questions really helped me get my thoughts together.

@SlamryCamry19 2 месяца назад

Great video and bro and I will be using your technique as soon as my AAK 180.4 gets here

@DaBadNewz 2 месяца назад

Thanks man! Hope it works out smooth for you. If you have any questions, don't hesitate to ask!

@SlamryCamry19 2 месяца назад

@@DaBadNewz will do thanks bro

@lilegyptshun 3 месяца назад

this entrance sold me, I trust you

@DaBadNewz 3 месяца назад

Hahaha I appreciate that! Hope you find the information useful!

@215sinakia7 3 месяца назад

Great video bro

@DaBadNewz 3 месяца назад

Thanks man! I appreciate you taking the time to leave a comment!

@chatobalencian1504 3 месяца назад

Appreciate tha vid bro keep em coming

@DaBadNewz 3 месяца назад

Thanks man! Will do!

@stereomojo 3 месяца назад

Good video!

@DaBadNewz 3 месяца назад

Thanks for checking it out!

@bryanhelland2722 3 месяца назад

i cant say enough good things about this video!!! well done bad news!! if more people would do these kinds of videos that actually help new installers people wouldnt blow there shit up. you are the ish my dude!!! from a fellow dago boy!!!

@DaBadNewz 3 месяца назад

Thanks man! I’m just trying to put out the videos that would have helped me along the way. Thanks for the feedback man, that shit really helps motivate me! Big SD!

@ceejaycjmusic 2 дня назад

Thank you bro, for the video......

@DaBadNewz 2 дня назад

No problem at all man! If you got any questions during a tune, don't hesitate to reach out. Thanks for checking it out!

@DIYAudioGuy 3 месяца назад

Great video!

@DaBadNewz 3 месяца назад

Thanks a lot man, that really means a lot coming from you. I appreciate you checking it out!

@toysforboysrc 3 месяца назад

You got a good radio voice 👌

@DaBadNewz 3 месяца назад

Hahaha thanks! I’ve actually heard that one before. (Makes me wish I had a decent idea for a podcast or something)

@toysforboysrc 3 месяца назад

@@DaBadNewz …Thats what I was thinking when you explained matching the amps wave length to the head unit’s wave length with the corresponding diagrams and using a volt meter to dial in your amplifier’s volume and crossover. There are quite a few reputable car audio channels that most of us know but none of them ever explained car audio in the same dynamic way you have, plus the diagrams and effects to relate the message, you made a very cohesive video🤙. So check it out.. unboxing videos right? But… instead of that basic “Show & tell” that every body is doing, you do the traditional unboxing, and then you hit them with the “KNOWLEDGE“🧠 I see a lot of room for creativity.

@DaBadNewz 3 месяца назад

Hey man that's a great idea! I HAVE been trying to think of different ways to do them, and that would definitely help people understand what gear they might want. I honestly really appreciate the suggestion man! You might just see some of that get incorporated real soon. And BIG THANKS for the feedback man! It means a lot cuz I was really trying to make this one be informative and helpful to folks.

@1904audio 3 месяца назад

Man you came with it on this one bro. JAY Z status!

@DaBadNewz 3 месяца назад

Good lookin out Kick!

@JR-yr8xm 3 месяца назад

Awesome video. Subscribed

@DaBadNewz 3 месяца назад

Thanks for the sub! I really appreciate that!

@jimmyramirez8844 3 месяца назад

Got a new sub bro 😎 🔥

@DaBadNewz 3 месяца назад

Oh yea? What you workin with?

@slowbrezze Месяц назад

great teaching nice

@DaBadNewz Месяц назад

Thanks for the feedback! Hope it was useful

@slowbrezze Месяц назад

@@DaBadNewz oh yeah! very

@fredleeman8186 2 месяца назад

Thank you

@DaBadNewz 2 месяца назад

You’re very welcome! Happy to help!

@six9carolinas 3 месяца назад

Good stuff bro!

@DaBadNewz 3 месяца назад

I appreciate that man!

@six9carolinas 3 месяца назад

@@DaBadNewz there are a lot of whack Car audio channels Example ( Bassdad lol) but you are honestly in my favs with Smd Exo and Soundman bro keep doing what ya doing buddy ...

@DaBadNewz 3 месяца назад

That’s a really big honor to be mentioned with those dudes, idk if I deserve that yet, but I definitely appreciate that man

@six9carolinas 3 месяца назад

@@DaBadNewz as far as i am concerned you deserve it bro

@DaBadNewz 3 месяца назад

@six9carolinas I really appreciate that man!

@kalebmask9855 2 месяца назад

Low and high pass filters brake down 1:46 Setting the gain 6:21

@DaBadNewz 2 месяца назад

Thanks for the notes! I definitely forgot those in the description

@ramsesfelix388 Месяц назад

Great video man! New subscriber!! Bro does that amp comes with a cooling fan? I noticed the smaller jp234 comes with one but I don't see a cooling fan on the website in the JP284. Thanks!

@DaBadNewz Месяц назад

Thanks man! I appreciate the sub! And nah no cooling fan on this one, just some vents in the acrylic on the back.

@briancast1595 3 месяца назад

Ayeee peso pluma 🇲🇽

@DaBadNewz 3 месяца назад

You know whats up!

@AngelGarcia_420 3 месяца назад

I remember my first system

@DaBadNewz 3 месяца назад

Me too! It was a 96 Deville with 2 Rockford T2 12s (the old metal face ones) on their T2500. (Thanks for your comment! That engagement lets RU-vid know to continue spreading my video to new people and helps grow the channel)

@worldwideteambasscatdownri6963 3 месяца назад

Heck yeah!

@DaBadNewz 3 месяца назад

‘preciate you!

@worldwideteambasscatdownri6963 3 месяца назад

@@DaBadNewz great video and like how you explained stuff.

@DaBadNewz 3 месяца назад

Thanks! I really wanted to make something that broke it down so anyone could tune their own amp. Thanks for the feedback!

@NYGunna631 Месяц назад

Hey man i have the same 4 speakers running on a Skar Audio RP-150.4AB. What would you recommed the settings to be at? My HPF is 20hz-5kHz and LPF is 50hz-500hz. Gain has no numbers lol. Thanks in advance

@DaBadNewz Месяц назад

If you have the same Arnolds, they perform best between 150-12k, but where you put those filters is going to depend on if you have tweeters, midbass, or any other speakers. I have mine set at 150 for now, but will be changing them to 250 or even 350 when I install my midbass. With the High filter at about 8k. As far as gain, that's where you're gonna have to follow the video. If you don't have a multimeter, you can do it old school by bumpin something that has lots of midrange/vocals/etc, turning your head unit to about 75-80% of the full volume, and adjust the gain on the amp until you hear the speakers start to distort, then dial it back just a tiny amount so it sounds clean again. (doing it this way isn't perfect, but it'll get you in the area of where you trying to go. You might have to readjust it a lil bit after hearing more music). Good luck man! if you have any more questions don't hesitate to reach out

@88santi 3 месяца назад

Wasup bro I don’t really have social media to follow you but is there any shows coming up here in sd?

@DaBadNewz 3 месяца назад

there's a mini Bass Meet on the 11th and the bigger one on the 18th. They go down at the Mission Bay South Shores Boat Launch. Check out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bsznCarW-D4.html for directions and links to the San Diego Basshead group (you don't have to have a FB to see the page). Hope to see you out there!

@thedoujinguynico7315 18 дней назад

How does the clip light on these work why didn't you say anything about it?

@DaBadNewz 18 дней назад

Oh wow! You’re absolutely right! I mentioned everything around the clip light, but never actually included the clip light in the explanation. Definitely a mistake on my part that I will have to come back to! But in the mean time: The clip light is supposed to indicate when the signal coming from the head unit is too high (because of the gain setting on the amp). I kind of touched on this when I showed the illustration of the signal on the left side of the screen getting larger to match the signal on the right (around 3:56). Let’s call the signal on the right the “max.” If the signal on the left had kept growing it would reach the point where the signal was no longer round at the peaks because it would be past the “max,” which would put a flat top on that perfectly round wave. That flat top is the clipping, and the amp should be able to detect it. The main reason I neglected to include this info, is because tuning the amp the way I have described will eliminate the need to worry about clipping, (but I absolutely agree it would have been useful information to include). Thanks for reminding me to cover that in the future! Hope that answers your question

@150dbtrunk 3 месяца назад

Only thing I messaged D4S about this months ago and they said only either the hpf switch can be ON or the lpf switch can be ON, apparently whoever messaged me back said one has to be off so I turned off my Lpf. Have you had any issues having both switches on? Maybe whoever messaged me back just didn’t know much about them

@DaBadNewz 3 месяца назад

Really? That’s super weird! I don’t think I’ve had any issues with both switches being on, and I can definitely tell that they are both working. Idk if the filters are right on the money where they say they’re going to be, but it definitely sounds like I’m getting both filters to work. Now you’re making me wanna do some more testing!

@francisromero5895 24 дня назад

Hey Nice video brotha👌🏽, I was wondering how to do the math on what i’m running, Ch1: 4 speakers at 1 ohm Ch2: 4 speakers at 1 ohm Ch3: 2 speakers at 2 ohm Ch4: 2 speakers are 2 ohm I have a factory radio as of right now but am running a Sundown sfb500 4 channel.

@DaBadNewz 24 дня назад

When using multiple speakers on a single channel, the only real difference is that you have to add those speakers together so you can think about the total load on the amp as if was a single speaker. (Since an amp doesn't know the difference between a single speaker or a bunch of them) As long as all the speakers on a particular channel are the same, the numbers are pretty straightforward. You would add the total RMS that each channel is going to need (or use 500 if the total is higher than that, since that's your amp's max), and then calculate it like I did. Example: (using made up numbers for easy math) Ch1 and 2: 100 rms speakers x 4 = 400rms. 400rms x 1 ohm = 400. Square root of 400 is 20. So for channel 1 and 2 you would want 20V AC on your multimeter (22.36 for 500 watts) If all 12 speakers are the same, channels 3 and 4 would actually have the same gain as 1 and 2, since it's half the ohm load and half the power. Hope this helps! Let me know if you need any more info

@johnnycoxwell4779 3 месяца назад

What song is played at 8:06?

@DaBadNewz 3 месяца назад

That’s Mt. Crushmore by Lettuce (good taste if you caught that short lil clip!)

@toysforboysrc 3 месяца назад

Hey man I got a question, these D4S amps are SPL class but can they replace an AB class if used with SQ in-dash speakers? I’m just seeing so much about D4S that I’m debating, but I’m more into audio for SQ. If I’m using all alpine gear, what can I expect replacing a 4ch alpine with a 4ch D4S?

@DaBadNewz 3 месяца назад

I would definitely think so. I have a fairly controversial opinion on the matter: the gear doesn’t matter as much as the install. Not to say it doesn’t matter at all, but after a certain $ amount the difference becomes negligible (generally speaking). But honestly, assuming similar power specs, I wouldn’t see much reason to switch unless you wanted a specific feature or something. These amps still have a THD of >0.1%, and in a car, that’s better than the listening environment can even realistically support (because of road noise, the engine, and just the world around a moving car being naturally disruptive to a clean sound). In other words: Go for it if you want more power or specific features these amps have, but if yours has similar power, you’re probably not missing anything. Hope that helps!

@toysforboysrc 3 месяца назад

Yes it helps. I had another question but it was too long so I’ll have to research. I’m Sure I’ll find more answers within your channel vids😎

@DaBadNewz 3 месяца назад

Hey if it’s a super in depth question, it might give me a good topic for another video, and that’s always welcome!

@toysforboysrc 3 месяца назад

@@DaBadNewz … ok🤔 we know that AB class amps run warm and in some cases hot but it’s due to all the components used for lossless sound. However we know that SPL amps like D4S can be a full range D class so it can run more efficiently and cooler so I understand that design. So now correct me if I’m wrong at any time but for example the JP34 purple is a class AB amp but are there any technical differences regarding its circuitry that makes it different from a traditional AB class amp that less experienced people would be familiar with? I mean (example) the amp switching to D class during extreme operating conditions to accommodate cooling efficiency? I just want to know how D4S is able to offer big watts at lower prices than their competitors.

@DaBadNewz 3 месяца назад

Tbh I have no idea! I’m not aware of any special circuitry, but that doesn’t mean it doesn’t have it. I honestly don’t know all that much about the circuitry side of things. Definitely something interesting to look into though.

@night1964prowler 12 дней назад

How do I inject the 1,000 hz ?

@DaBadNewz 12 дней назад

Damn I guess I should have included a link to some test tones! That will depend on how you listen to your music. If you primarily play off your phone, you can just search on spotify or youtube (not the best option, but if that’s how you listen anyway, it will cater your tune to your actual use). If you use mostly USBs or something directly connected to your head unit, then I would download from a reputable source (there are a bunch online, like from Audio Dynamics, just search “1khz test tone.” They will have a dB in the title (0, -5, -10, etc). I would use 0 for the safest option (wont risk any clipping), but sometimes -5 or -10 will get you more of the thump you want (just keep an eye/ear out for clipping)

@GrandNash-bk2kq 2 месяца назад

I have no clue what I’m doing I still need help with tuning my amp

@DaBadNewz 2 месяца назад

Which part are you having an issue with?

@GrandNash-bk2kq 2 месяца назад

I don’t really understand how to set the hpf/lpf on the amp. It’s a jp234. I’m running 4 ds18 6x9, 2 ds18 6.5, 2 ds18 tweeters and 2 6.5 skar speakers in my grill

@DaBadNewz 2 месяца назад

@GrandNash-bk2kq how do you have everything wired up? You wanna set you filter based on what your speakers are made for, but that only works if all the speakers on that channel need the same filters.

@tafaudio 2 месяца назад

What if i have 6 speakers on a 4 channel?

@DaBadNewz 2 месяца назад

That's going to depend on how you have them wired, and also what the specs for each speaker are, (if they're not all the same). The process is the same, you just need to do the math slightly different depending on how you wire everything up. What are they and how are you trying to run them?

@tafaudio 2 месяца назад

@@DaBadNewz 6x AP-M61SE Ch1 - 4ohm Ch2 - 4ohm Ch3 - 2ohm Ch4 - 2ohm

@DaBadNewz 2 месяца назад

@tafaudio since they’re all the same it’s pretty easy, looks like your channel 1 and 2 will be done just like mine. The only difference will be for channel 3 and 4 you will add the RMS together before multiplying by the combined Ohm load. Since those are 130 RMS, 2 of them would be 260 RMS. Multiply that by the Ohm load (2) and you get 520. Square root of 520 is 22.8, so that’s what you would look for on your multimeter. Hope that helps!

@tafaudio 2 месяца назад

@@DaBadNewz so if im correct when i use the multimeter on ch1-2 im looking for 32.2 and when i use it for ch3-4 im looking for 22.8… im new to this lol

@DaBadNewz 2 месяца назад

No actually both you would be looking for the same. On channel 1+2 you have 1 speaker at 4 ohms, which is actually the same as the 2 speakers at 2 ohms that are on 3+4 (as far as the amp is concerned). (130x4) vs (260x2). Same thing! Just make sure your amp can handle that power and ohm per channel and you should be good to go!