To turn on a SENFENG fiber laser machine properly, follow these steps:
1. *Pre-start checks*:
- Ensure proper installation and maintenance.
- Check the water cooling system, laser head, and mirrors for cleanliness and damage.
- Verify the correct settings for the laser power, frequency, and pulse duration.
2. *Power-on sequence*:
- Turn on the cooling system (chiller or water pump).
- Wait for the temperature to stabilize (usually around 20-30 minutes).
- Turn on the laser machine's main power switch.
- Wait for the machine to boot up and perform its self-test (usually around 5-10 minutes).
3. *Laser initialization*:
- Select the appropriate laser mode (e.g., cutting, engraving, or piercing).
- Set the laser power and frequency according to the material and application.
- Initialize the laser head and mirrors.
4. *System checks*:
- Verify the laser beam is centered and focused correctly.
- Check the assist gas pressure (if applicable).
- Ensure the workpiece is properly positioned and secured.
5. *Start the laser processing*:
- Begin the laser cutting, engraving, or piercing process.
- Monitor the process and adjust parameters as needed.
Remember to consult the SENFENG fiber laser machine's user manual and operation guide for specific instructions, as the exact steps may vary depending on the machine model and configuration. Additionally, ensure you follow proper safety protocols when operating the laser machine.
30 июн 2024