How to upgrade / replace YAMAHA GRIZZLY clutch  

By replacing the weights, adding shims, and putting in a mudder spring, it keeps the belt lower within the sheaves on the primary clutch for a longer amount of time. That helps from spinning tires and causing you to dig deeper and getting stuck. So if you do this setup, you'll have to give your Grizzly some gas to get er going. It will seem strange at first with the higher rev / rpms to get going, but that's what it is supposed to do. If you do any rising in water, mud, or goopy sand, and you have anybtire larger than a 28", this is more ideal of a setup to run.

@octaviontoomer3564 10mm for the clutch cover removal.

Torque sensor or EPS module. You will have to do OHM resistance test on them and/or replace them. If they are ok, it could be you Module.

@@Doinityourself Alright thx