How to Use a Brass Anchor Removal Kit

Подписаться 8 тыс.

Просмотров 35 тыс.

50% 1

#PoolClosing #GLIPools #PoolSafetyCover
Are Your Brass Safety Cover Anchors Giving You Trouble? Maybe they won’t come up, won’t turn down, or just spin in the hole forever? A Brass Anchor Removal Kit allows you to replace your stuck anchor in minutes! Don’t let this issue lead to scraped up hands, and increased frustration. There’s a fix which doesn’t involve drilling a brand-new hole and is very economical.
Read our Product Blog: www.eztestpool...
Click to purchase the GLI Brass Anchor Removal Kit that's featured in this video: www.eztestpool...
Be sure to watch our other Brass Anchor Pulling Tool Kit (Loop-Loc) video at: • How to Use a Brass Anc...
Shop all of our swimming pool winterization items including additional safety cover hardware at: www.eztestpool...
For more info, subscribe to our channel: / eztestpools
Family-owned since 1989, E-Z Test Pool Supplies has 3 retail stores in the Southern NH and Metro-Boston area, plus an extensive online store for all things pool related. Shop over 20,000 pool products at www.eztestpool...
VIDEO
Video footage (DSLR & Drone), stills, and editing by:
Derrick Feole | Feole Images | www.derrickfeol...
/ feoleimages
derrick@feoleimages.com

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@Eztestpools 4 года назад

Be sure to watch our other Brass Anchor Pulling Tool Kit (Loop-Loc) video at: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZRZmTAzmQGY.html Shop all of our swimming pool winterization items including additional safety cover hardware at: www.eztestpools.com/winter-pool-items/ For more info, subscribe to our channel: ru-vid.com Family-owned since 1989, E-Z Test Pool Supplies has 3 retail stores in the Southern NH and Metro-Boston area, plus an extensive online store for all things pool related. Shop over 20,000 pool products at www.eztestpools.com

@marcodeluca4068 2 года назад

Question why is my cover sits a little high creating a 1/2- 3/4 inch gap and leaves get into the pool is there a way to lower the cover closer to the concrete?

@yabits 2 года назад

terrific video! This tool is just what we need. But I notice it's out of stock. Any idea when it will be available again? Thank you.

@Eztestpools 2 года назад

Hello, this is a very popular item, especially in the fall. We do not know when it will be back in-stock. We appreciate your interest.

@maryannwillard9471 4 года назад

Thank you. Very helpful as we have several anchors to replace. Glad to see info in installation of new anchors as well.

@Eztestpools 4 года назад

Thank you very much Maryann, Glad we could help!

@sebagolakesaccounting5571 2 года назад

The 1/4” bolts keep snapping before the anchors come out of the concrete. What do I do?

@Eztestpools 2 года назад

Where do they keep breaking? Maybe they are too tight? Before we can answer we need a bit more info. Thanks!

@sebagolakesaccounting5571 2 года назад

@@Eztestpools when i tighten the nut down on the washers the bolts snap where the nut is. The device worked on a couple but the rest I cannot get to release from the concrete.

@tek4 2 года назад

@@sebagolakesaccounting5571 the threaded rod in the video is 5/16 for the demonstration. 1/4 rod may be too weak. You can try drilling this out and retapping with the next size up. 1/4, to 5/16 or 3/8ths if that is easier to get ahold of. Then use the corresponding size rod to the larger diameter hole you made with a focus on tapping the pipe that is the vertical tube as that will shock the anchor out better then relying solely on the nut and rod since the threads you made are in to a brass anchor. I just used this technique last Thursday when I set 2 3/8ths steel drop in type anchors (different purpose then pools but same idea) and it absoutley worked to pull those out.

@Eztestpools 2 года назад

@@sebagolakesaccounting5571 You most likely stripped either the nut or the threaded rod at that particular spot. Local hardware store should have replacement threaded rod or nuts. I believe that its 5/16 in. -18 thread pitch. Thanks for watching!