Thank you so much!!! We tried figuring this out for half an hour with no luck. Within one minute of your video we found out the tray pushes down. Much appreciated
Oh my goodnesss thank you so much for this video!! I was getting so upset trying to figure out why the paper would not go in!! You are a lifesaver! Thank you!! 🙌🏻🙌🏻
THANK YOU. I've been struggling with this machine for over 20 minutes. I'd never have figured out that I needed to flip down the back. You're right...they SHOULD include that step in the instructions!!
Omg!! Thank you for that tidbit. Even other videos I watched didn’t mention putting the tray down. I was scared I was gonna break it until I saw your video.
Thank you so much. I struggled for an hour regarding dropping the back tray. Thought for sure it was going to brake. Once I watched 10 seconds of your video, I pushed it down hard, even then I thought it was going to brake, but yeah it was working just fine. Much appreciated..
Thank you for making this video! I couldn't get the back feeder tray to go down and I thought I was going to break it till I saw your video! Also the directions with the thing are terrible. You explained well and I really appreciate it!
Mrs. Vee...Bless you! I thought my laminator was wrong!!!! I was so scared to flip that back tray down because I didn't want to break it. Definitely a miss in the instructions. Thank you so much!
Thank you!! I purchased this laminating machine and could NOT for the life of me figure out what step we wer missing. This was helpful. Yeah, that's a pretty important step for them leave out.
Thanks! I brought this from a yard sale full of returns from Walmart. The attached return receipt stated that it was damaged which I didn't notice until I got home. I was just about to trash it thinking that it didn't work but then decided to come to RU-vid for some troubleshooting tips. Thankfully, I did so because I found that all I needed to do was push the tray down and it worked like a charm!
I had not used laminate in a while and had to be reminded how to set it up. I watched one video and didn't quite get there but YOU are great!! You got the job done plain and simple!! Thank you so much!!😊
I spent too much time trying to figure out how to use this thing! Thank you for showing us that the back tray actually goes down. I wish that were in the instructions. Very helpful!!!
Joining the masses. I had tried pushing the tray down, but with no instruction on doing so I was afraid to break it. They still have not fixed this several years later. Thank you!
This video literally saved me a trip from returning what I thought was an effective machine thank you so much for showing us that you need to place the back down to use it. You are a lifesaver.
I was afraid to break the plactic of the tray by pushing it down, so I looked up the video thinking it maybe had to do with the ABS button, definetely should have been included on the instructions!!!
Thank you for all of your information. It really helps. I will say it now, even though I do not have a machine, I now know what to do with the tray. I've seen 2 other videos before you and neither one mentioned about the back tray. With step to step instructions, I expect it to be step by step and no stone unturned! I like they thinking we are Morons.
This video was so helpful!!! My husband and I couldn't figure out how to get the black flap down. You're right they didn't tell you in the instructions. 👍 🙏 💡
omg you are a life saver!!!! i tried looking for the instructions but i lost them lol. i tried moving the tray but not the entire part lol. thanks again!!!
Thank you so much for this video! I tried for 30 minutes trying to get the sheet to feed through the top until I finally decided to get on You Tube haha!
OMG I did not want to give up on this little machine and I am so glad I looked up a video first because I felt like the tray needed to move but I didn't want to break it. Thank you so much!!
Thank you for this great video. I couldn't figure out how to get the feeding tray to work. They need better instructions but with someone like you to help out is AWESOME!!!
Omg I was so frustrated with this little machine I was ready to take it back cause I’m saying this thing doesn’t work I watched some other guy and his video made no since I kept on and it n and I came back to RU-vid and found your video which was a lifesaver and lm with you on da opening of the tray cause I was big confused on how you supposed to load this thing …THANK YOU SO MUCH ❤
Thank You! I was so confused. I took the screw out of the back. And put to put it back together. I was ready to box it back up and take it back to Walmart!
Thank you SOOOO MUCH !! Just trying to laminate for my Happy Planner and just bought this laminator, looked simple enough lol It did crumble a little at the end on my first one, not sure why, trying it again
THANK YOU ! I was blown away like what in the living hell lol The company did not mention that you can lower the try or where to feed your plastic slip to laminate your project. But once again, thank you for posting this video 😁
Thank you!!! I just bought this machine. It's a newer version, the box even states "improved performance" but they still failed to mention to open the tray!!! I was going crazy trying to figure it out!!!!
Thanks good point! Same thing happened to me. Now you have 3 items here in this video, you did say now cut to size, I am trying that now as I have only one small item to laminate, I wonder if they have smaller pouches avail. ? 🤔
I need a new laminator machine! I might have to check this one out! Mine has really been acting up! Thank you for the mention! Glad you enjoyed the trackers! 😊
Thank you so much for saying it doesn't have to go straight because you're going to cut it out anyway I needed to hear that 😢I was driving myself crazy 😜