How To Use A Servo With Raspberry Pi Pico

Подписаться 119 тыс.

Просмотров 19 тыс.

50% 1

🔗 The full guide : core-electronics.com.au/guide...
In this guide, we'll learn how a Servo works, the difference between a Positional Servo and Continous Rotation Servo , how to use a Servo with a *Raspberry Pi Pico*, and what to consider when choosing a Servo.
🔧🔨🧰 Hardware featured in this guide:
Feetech FS90 180 degree Servo:
core-electronics.com.au/catal...
Feetech FS90R Continous Rotation Servo:
core-electronics.com.au/catal...
Raspberry Pi Pico:
core-electronics.com.au/catal...
Robot Arm
core-electronics.com.au/catal...
Servos:
core-electronics.com.au/compo...
💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: coreelec.io/forum
0:00 Intro
0:40 How a Servo Works
1:23 Positional Servos vs. Continous Rotation Servos
2:03 Connecting a Servo to a Raspberry Pi Pico
2:44 Installing MicroPython-servo library
3:34 Using a Positional Servo with the Pico
6:40 Using a Continous Rotation Servo with the Pico
9:36 What to Consider when Choosing a Servo
11:27 Conclusion
🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
• Raspberry Pi core-electronics.com.au/raspb...
• Arduino core-electronics.com.au/ardui...
• Sparkfun core-electronics.com.au/brand...
• Adafruit core-electronics.com.au/brand...
• Pololu core-electronics.com.au/brand...
• DFRobot core-electronics.com.au/brand...
The following trademarks are owned by Core Electronics Pty Ltd:
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@mathavan5919 3 месяца назад

Thank you so much bro

@Danster575 4 месяца назад

My idle want that i install a module named machine but first i dont know why and second thing is that when i want to install it i receved a error message Can you help me please

@mannahfarmandforge5225 Год назад

Hi I'm trying to follow along but in Thornny I cannot find "Micropython servo" package. Any pointers?

@santanukumarpatra2073 2 месяца назад

it"s micropython-servo

@natashasmith7182 7 месяцев назад

Is it normal for the range to be less than 180 degrees, around 160 or so? Is there a calibration process?

@Core-Electronics 7 месяцев назад

Some servos may have more or less range, check the data sheet of your servo model to see what it is, 160 sounds like a weird number though 🤔

@btigenie 6 месяцев назад

Following code line by line and when I get to run, I get an error saying "no module named 'machine'". It is a requirement of micropython-servo .... what package or plug-in is it?

@comical24 5 месяцев назад

have you got micropython installed on your pico? if not, go to the bottom-right part of thonny and click "install micropython". go through the needful and whatnot, then the machine library should work!

@pcc404 4 месяца назад

o-ooh i thought rotational servos could be positional

@richardcafe7757 8 месяцев назад

Guide, what guide? Go to where? You're forgetting you're teaching novices. 🤦‍♂️

@Core-Electronics 8 месяцев назад

Hi Richard, it's in the first line in the description.

@richardcafe7757 8 месяцев назад

@@Core-Electronics Hi, sorry. I'm an amateur model maker trying to get battleship turrets to turn and elevate and I've ended up in an electronic and programming nightmare😱😁 Thanks, I'll re watch it.👍

@Core-Electronics 8 месяцев назад

No worries mate, sounds like a fun project 👍

@richardcafe7757 8 месяцев назад

After my initial outburst (from my frustration rather than anything you had or hadn't done, once again my apologies) I have to say I found your coding, description and explanations very easy to follow and I now understand a heck of a lot more than I did yesterday. Thank you.👍 Could you do or have you done a follow up to this vid covering running two or more servos doing independent movements simultaneously? That would certainly be of great help. Thanks again.