How to Use a Thermal Printer for Tattoo Stencils | Paul Talbot & Brother Printer FAQ/Troubleshooting

Подписаться 71 тыс.

Просмотров 79 тыс.

50% 1

Killer Ink had the pleasure to welcome UK tattoo artist Paul Talbot to our studio to discuss how to use a thermal printer for tattoo stencils.
While he was here, Paul answered some frequently asked questions regarding creating tattoo stencils with your Brother printer, as well as troubleshooting some common issues that artists face.
Make sure to watch our video with Paul Talbot and Brother Printers to learn just how to use a thermal printer for your tattoo stencils, along with some other tattooing tips from Paul!
0:00 Intro
0:13 Welcoming Paul Talbot to the Killer Ink Studio
0:26 Which Brother PocketJet Printer Should I Buy?
0:58 Brother PocketJet PJ-723 Printer
1:30 Brother PocketJet PJ-773 Printer
3:53 Brother PocketJet PJ-763MFI Printer
6:19 Do You Exclusively Use Brother Printers for Your Stencils?
8:07 Benefits of Using a Printer for Stencils Over Hand-Drawn Designs?
12:18 Can the Brother Printers Be Used Just Like a Thermofax?
13:36 Can an Artist Simply Print Out a Picture They Found Online?
17:24 Do You Have to Use Spirit Paper or Can You Use Any Type of Stencil Paper?
19:34 Can You Use Spirit Thermal Rolls?
21:16 How Do You Recommend Cleaning the Printer?
27:03 Tips & Tricks for Producing Best Possible Stencil?
29:19 Faint Stencil Troubleshooting
32:44 How to Prevent the Printer Creasing the Paper?
35:48 What Can Cause the Print Out Having Marks on It?
39:46 What Is Stencil Mode?
41:13 Faint Stencil Print Example
44:06 Difference Between Density Levels?
47:36 Brother Printer Warranty
47:48 Paul Talbot Social Media & RU-vid Channels
*This video was filmed January 2020, pre-COVID-19 pandemic.
---
Watch our previous video on how to use a thermal printer for tattoo stencils with Paul Talbot and Brother Printers here: • How to use a Thermal P...
Brother PocketJet Thermal Printers and Scanners are available to order from Killer Ink Tattoo here: www.killerinktattoo.co.uk/tat...
ReproFX Spirit Stencil Transfer Paper is available to order from Killer Ink Tattoo here: www.killerinktattoo.co.uk/tat...
---
Tattoo Artist: Paul Talbot (The Modern Electric Tattoo Co.)
Paul Talbot Instagram: / paultlbt
Paul Talbot Twitter: / paultlbt
Paul Talbot RU-vid: / modernelectric
Studio Facebook: / modernelectrictattoo
Brother Printers Facebook: / brotherprintersuk
Brother Printers Instagram: / uk.brother
Brother Printers Twitter: / brother_uk
Videographer: Raim Grin
Facebook: / grin.raim
Instagram: / youaregointofall
Vimeo: vimeo.com/raimgrin
---
Make sure to check out Killer Ink Tattoo's website and social media channels below!
Website: www.killerinktattoo.com
Facebook: / killerink
Instagram: / killerinktattoo
Twitter: / killerinktattoo
#PaulTalbot #BrotherPrinter #FAQ #Troubleshooting #TattooStencil #KillerInkTattoo #KillerInk #Tattoo #Tattoos #TattooArtist #TattooStudio #TattooSupplies #TattooEquipment

Хобби

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 215

@RobertBoerner Месяц назад

I myself am not a tattoo artist, but I found this video while researching portable printers. Of all the videos I found for the Brother models, this was the most informative and extremely well done. Kudos, and thank you!

@KillerInkTattooEU 26 дней назад

Thanks for the watch and glad the video could be of assistance to you 😊

@alexisb5110 2 года назад

Been having the S8 763 mfi version for a couple months now and i can honestly say, I LOVE IT. Haven’t had any issues with it. Thank you !

@climbjay 3 года назад

As far as delivery goes, this is one of the most thorough and concise and easily digestible reviews I’ve ever seen. Paul is great!

@wilmervalles1509 3 года назад

I am a huge fan of Paul Talbot, because he is a straight forward guy and he gives solid advice for any Artist who is starting and is passionate of their art. Thank You Paul for all these advices.

@Infinitesyndicate. 4 года назад

Really Great Tutorial video Paul and Killer Ink! Paul's tha man! Gonna be getting one of the 763's asap! Thanks guys!

@railwaystationmaster 3 года назад

ABSOLUTELY BRILLIANT CUSTOMER SERVICE ! My Brother 773 arrived in quicktime today and unexpectedly INCLUDED a power lead , i had purchased the previous model by mistake from amazon and that did'nt so you guys really rock , much appreciated , and have a good christmas .

@KillerInkTattooEU 3 года назад

Hey, thanks for the kind words and glad we could help!

@CosmoK-lp9vy 3 года назад

I love around 9:30 there's a random edit when he points to the tablet lol but that rotation of the stencil was absolutely wonderful! I appreciated this large!

@robinocap 2 года назад

also 34:09 was amazing

@leakligot 3 года назад

Thank you for the really informative and thorough video!

@richardxs 3 года назад

Love all the tips on this video, now I understand better my brother thermal printer

@nparsona Год назад

My Brother 723 arrived today from Killer Ink (one day after ordering - woohoo). The first tattoo I printed wasn't bad considering I forgot to remove the protective sheet! Looking forward to using these tips at the weekend.

@PRDGLBRD 3 года назад

Watching you lads handle carbon without gloves gave me flash backs of being in the purple hand gang as an apprentice

@fanniannakeseru2352 3 года назад

Thank you thank you thank youuu!! I couldn't for the love of everything figure out what could be wrong with my stencils they came out faaaaint! Thank you you guys are the best!

@KillerInkTattooEU 3 года назад

Hey, no problem at all - glad we could help!

@phananh8656 2 года назад

I have a problem with the paper being rolled up and unable to print. Can you help me fix it?

@lukabalta2398 2 года назад

YOOO that ipad wobble was just an amasing detail lmao i lost it and rewinded so many times on that 😂

@pavelhabrman1354 2 года назад

Thanks so much , you re my hero

@ryanosaurust 3 года назад

i agree with 763 !

@eduki 4 года назад

Hi there ;) Awesome review, and I´m gonna give you my 2 cents if you don´t mind ;) First of all, Paul is a legit guy with a lot of experience, and he explained perfectly everything, and not only this, but even the tips and tricks about these Brother printers. Second, as an experienced tattooer, I´ve used them for many years and yes, they are solid as a rock, I think that I never had to clean them, so they need almost zero maintenance. But, they are sitting now at the studio as a secondary option since I started using the new Epson/Inkjet combo system. Reasons explained: The Brother, even the newest models, have a limited ppp, and memory buffer, this sometimes drives you on troubles. Sometimes you struggle with the paper/bents/heat. You have to align, cut and correct the alignment of the paper while feeding it. Your hands get dirty, and everything around your printer becomes purple just in a few days at work. Sometimes you must play with the document opacity because of the limited ppp/buffer/printer sysem itself. With intrincated designs you´ll have cuts of lines, extra lines, small splashes and empty spaces (sometimes). Menawhile, with the Epson system you just have to feed the Inkjet stencil liquid on the printer reservoir, place a bunch of papers as you´d normally do with a regular printer (need to mention that these papers must be Inkjet stencil paper, but I even worked with regular paper) go to your preferred software, send to print and BOOM. Stencil done. No need to mess with paper placement. No paper bents, heat issues. No more dirty hands or desk. PERFECT definition (higher ppp and buffer) and by the way, you can use the stencil liquid of your choice, even when they swear that you might use their particular liquid ( personally I love "Hulk") Yes, as Paul says, who cares about a stencil on the skin with the full photography of the design, we all trace the main lines at the tablet and then go to the stencil printer, but man, even for this, the Epson system is tons better. I used, and I´m sure that I´ll still be using the Brother, but if you want your tattooist life to be easier, Epson/Inkjet is the way to go. My apologies if this is just a commercial and I´m disturbing at the channel, but I strongly suggest you to add this to your store, review and compare it, and who knows, maybe soon we will see this at your awesome RU-vid channel. And sorry about my bad english ;)

@vadims331 3 года назад

So with epson printer stencil I can use even electrum to transfer on to skin?

@eduki 3 года назад

@@vadims331 hi don't use electrum but with the others that I used it worked without any problem. I also have the inkjet transfer liquid because I bought the complete pack, but don't see any difference.

@vadims331 3 года назад

@@eduki there are quite few them inkjet printers.wich ones are good then?

@eduki 3 года назад

@@vadims331mostly Epson. You will find at youtube vids if you type "printers for inkjet stencil printer" there are some models... Mine is the ET-2600 which is great, but if I'd have to choose it again, I'd go for the other Epson with smaller ink charge bottles and you don't have to throw in all your inkjet stencil ink inside. Anyway several months after I filled my printer's bottles, it never dried. (I don't remember this model's serial number, but I'm pretty sure that you are going to find it at the RU-vid,and the right instructions about it. If not, write me and I'll guide you ;)

@vadims331 3 года назад

@@eduki how long stencil stays on the skin?

@ChristopherCowman-ve4lj Год назад

Hi Paul I wonder if you can help me. I recently bought a pj 763 and use the iPrint&Scan app with it but I can’t size my image by accurately as there doesn’t seem to be a way to measure other than guessing. Also I normally need to print several images on one sheet but there doesn’t seem to be a way to do this without running the sheet through one image at a time to get all the images on the sheet. Plus it doesn’t seem to be any use for oversize stencils that span over several A4 sheets like large back pieces. I have to revert to my 732 and windows frequently for these needs. I’m hoping that I’m just not aware of the functions of iPrint&Scan and scan properly and you might be able to put me right. I know you’re a busy guy but I’m hoping you might help me. Thanks for reading my message. Chris

@frankrenteria4370 2 года назад

I bought a used pj662 Bluetooth printer. Im trying to get it to work on my android phone? Any help works

@moriart7981 3 года назад

Hey! I bought a pj-723 from your website, it works perfectly, but the problem is that it does not have a battery. is the battery included?

@KillerInkTattooEU 3 года назад

Hey, no battery is included with the printer, but we do offer them here: www.killerinktattoo.co.uk/brother-li-ion-battery-pabt002-for-pocketjet-pj-723-and-pj-773-thermal-printers

@ishraki5573 3 года назад

my problem is getting a stencil where there is a variation between thick and thin lines. the thick lines get too hot and melt the plastic and thus destroying the print.. however if i lower density then the thin lines don't show up. any advice?

@KillerInkTattooEU 3 года назад

Hi, you may need to lighten the image before printing. If you need further assistance, please feel free to email us at info@killerinktattoo.co.uk

@nicklimpz 4 года назад

I like These printers but sadly mine has been giving me vertical lines in my stencils ! But really handy on the road

@KillerInkTattooEU 4 года назад

Hey Nick, check out what Paul says about print-outs with marks on it at 35:48 and see if that helps solve your issue!

@ThursdayFest 3 года назад

Hello, I have a PocketJet PJ622 and I was wondering how you fill up the ink for this printer and which make is the best to use? Thank you

@KillerInkTattooEU 3 года назад

Hi, you don't fill up the PocketJet printers with ink - you just use carbon paper when printing, as shown in the video.

@realJaycelee 2 года назад

😂

@inktensive1584 3 года назад

Do I have to use a clear carrier for these? if not will it even work if I make sense

@KillerInkTattooEU 3 года назад

Hi, no you don't need to use a clear carrier for these printers. Just the paper to print on with the yellow sheet and protective sheet removed.

@guiemink 2 года назад

For an iPad pro use, what is the main difference between 763MFI and 773 model? I mean except the bluetooth and wifi, what does it changes finaly? Sorry but I can't well understand all the video because I'm not English. Thank you

@KillerInkTattooEU 2 года назад

Hi, they are the main differences really. Except for the connection, they both perform the same, in terms of printing.

@brookiecostin7417 2 года назад

Hi I have a pj-723 and I have adjusted the setting to fit the paper but it continues to smoosh my my design and creats these horizontal lines. Any idea how to fix it ?

@KillerInkTattooEU 2 года назад

Hi Brookie, you're best checking that Stencil Mode is turned on. It might also be worth changing the density of the print to combat the lines issue. Switch to linework on the design to avoid solid colour areas too.

@davidstanoiu6552 9 месяцев назад

the brother printer 763 can work with iphone if its not MFI???

@j_demiguel_ink2343 3 года назад

Does anyone know how to fix these things? I have all lights blinking red and my Bluetooth light blinking as well. Since the day I got it. I can’t seem to get ahold of support. There are no articles on the internet to troubleshoot besides Brother website which is not helpful. I just want to use this dang thing already

@KillerInkTattooEU 3 года назад

Hi, if the data light is solid/blinking and you haven't done anything, try putting a piece of paper through because it might just be printing a report. This is caused by pressing and holding the feed button. If that doesn't solve the issue, Brother has a support email and you can also email our team at info@killerinktattoo.co.uk if you purchased the printer from us.

@SNN-iv9eb Год назад

Thanks, which spirit stencil paper is fit with this model?

@KillerInkTattooEU Год назад

Hey, Any stencil paper called Thermal will work with it. www.killerinktattoo.co.uk/reprofx-spirit-classic-purple-thermal-copier-hectograph-paper-8-5-x-11 www.killerinktattoo.co.uk/reprofx-spirit-green-thermal-copier-hectograph-paper-8-5-x-11 www.killerinktattoo.co.uk/reprofx-spirit-green-box-of-100-thermal-copier-hectograph-paper-8-5-x-14 www.killerinktattoo.co.uk/reprofx-spirit-classic-roll-of-purple-thermal-copier-hectograph-paper-8-5-x-100ft www.killerinktattoo.co.uk/reprofx-spirit-classic-box-of-100-purple-thermal-copier-hectograph-paper-8-5-x-14 www.killerinktattoo.co.uk/s8-red-tattoo-stencil-paper-100-sheets-8-5-x-11 www.killerinktattoo.co.uk/s8-red-tattoo-stencil-paper-roll-8-5-x-100ft

@boldackalack_4864 2 года назад

Does anyone know if you can use a 3rd party power adapter ? I've bought a pj763 but didnt realise the power supply doesn't come with it

@KillerInkTattooEU 2 года назад

Hi, we would not recommend using a 3rd party power adapter. If you bought your printer from us, it should come with a power adapter as standard.

@ReneArtSurda 2 года назад

hi dear friend. whan can I do when the cylinder drive jams . all my sporit paper are broken.

@KillerInkTattooEU 2 года назад

Hi, if it's a mechanical issue, you'd be best contacting Brother directly. If you bought it from us, you can also email info@killerinktattoo.co.uk and one of the team will look into it.

@karinaleef7664 3 года назад

Do you think the Brother PJ763 will be compatible with my iPad? It’s not the mfi copier

@KillerInkTattooEU 3 года назад

Hi Karina, you would be best checking out Brother's website or contacting them regarding compatibility with your specific printer and iPad model.

@antoniocalo4213 4 года назад

Thank's for this video more! I'd like to know which SOFTWARE settings Mr. Talbot used towards the end of the video to launch and adjust the intensity of the print??? Do you do it from the Photoshop or Procreate print settings or from the installed Brother printer settings? Thanks so much for an answer! 🙌🙌🙌

@KillerInkTattooEU 4 года назад

Hey Antonio, if you go to 41:13, Paul uses the Brother iPrint & Scan app for his iPad. However, you can also change print intensity through the print settings tool program from Brother. If you have the printer and cannot find the program, you can download it off their site.

@antoniocalo4213 4 года назад

@@KillerInkTattooEU Thank you! Yes i've already the PJ-763 Mfi and I have some issues about printing with shade gradient like the last print on this video! I tried many times with the Brother software settings or by Photoshop, modifying the intensity and using the "Stencil Mode" but I can't reach and get the shades on paper, just the outlines! I hope soon to get the new iPad with microled that Apple is expected to market in late 2020. I'm waiting for!!!

@redgarsraudins2303 2 года назад

Hallow, do any buddy know where in windows I can switch to my printer pj 763 mfi can see the mid tonnes, I just basically need a small details visible in my stencil but the printer don’t seen them ,just a black 😢

@KillerInkTattooEU 2 года назад

Hi, if you download the Printer Setting Tool off the Brother website, it will give you access to print speed and density. In addition, it will also allow you to see if 'stencil mode' is on.

@mariettavitola9765 Год назад

Hi! I have the 722 and I don’t know if I bought the wrong paper or I’m doing something wrong when I’m printing the stencil it looks like is not hot enough but I can see a little trace on the transfer paper but is not solid at all. The paper I’m using is the replica thermal transfer. Can you guys help me with that

@KillerInkTattooEU Год назад

Hi Marietta, can you please send a video and some pictures to info@killerintattoo.co.uk so we can have a look and offer some advice.

@rakheeshah7505 2 года назад

Does the PJ723 have stencil mode. I find my printer just jams and scrunches up on itself if I send anything other basic solid linework designs through it. HELP!!!!!

@KillerInkTattooEU 2 года назад

Hi Rakhee, if you access the Printer Settings Tool program from Brother, you will be able to see stencil mode. If you have the printer and cannot find the program, you can download it off their site.

@ricky15913 2 года назад

Can one one artist be connected to it via Bluetooth at at time. If we all run apple pencils we would have to shut off iPads in order for an artist to print.?

@tinamanzo6073 3 года назад

I got the 763 but not the mfi

@damiansanmartinguerra2038 3 года назад

Qué lástima que no pueda comprar en su tienda siendo de sudamérica. Una real pena, estaba muy contento de haberlos encontrado, carrito lleno y no puedo comprar.

@damiansanmartinguerra2038 3 года назад

De todos modos, gran trabajo, nos has sacado de dudas a muchos. Muchas gracias. Demonios, qué ganas de comprarles la Brother a ustedes.

@Afalism 3 года назад

hello, i'm french i don't understand the video well, does the pj763 bluetooh work with ipad pro and procreate? please thank 🙏

@KillerInkTattooEU 3 года назад

Hi Fabien, yes the PJ-763 can connect to iOS and Paul uses Procreate too, so it is compatible :)

@Afalism 3 года назад

@@KillerInkTattooEU Thank you for your reply! 🙏

@phananh8656 2 года назад

I have a problem that when printing the stencils get rolled onto the rubber shaft and get crumpled. Is there any way to install it or how to fix it? help me

@KillerInkTattooEU 2 года назад

Hi, some solutions are to clean the rollers, check print density and guide the paper out of the printer while printing, as it can catch if it is not supported. It may also be to do with the reference image. If it is too dark or features a lot of solid colour in the area, it can heat the carbon and cause it to stick.

@ricky15913 2 года назад

I have the pocket jet 763mfi

@theironpincustomtattooco.6903 3 года назад

Has anyone had any issues with setting up the 773 on wps on the router? We bought it so it can be connected to the wifi router and used by our artist easily, but holding down the wifi button for 5 secs (like the manual states) does nothing. Is our printer faulty or are we doing something wrong? :(

@KillerInkTattooEU 3 года назад

Hi, wireless setup details can be found on the Brother site: support.brother.com/g/b/faqend.aspx?c=us&faqid=faqp00100045_001&lang=en&prod=pj773eus If you need any further help, please feel free to email our team on info@killerinktattoo.co.uk

@roystat12 10 месяцев назад

Hola y muchos saludos desde Madrid. Tengo una pregunta como podemos limpiar el rodillo de la impresora si no tenemos el cleaning sheet?

@KillerInkTattooEU 10 месяцев назад

Hey, alcohol wipes are good at getting carbon off the rollers and a dry paper towel to dab the little pools/streaks of carbon from the alcohol. We recommend gloves as well as carbon gets everywhere! 😊

@roystat12 10 месяцев назад

@@KillerInkTattooEU muchísimas gracias por el consejo!!!🙏

@eaasen14 2 года назад

Has anyone had problems with pixelation when printing? Im thinking it might have something to do with my original document dimensions in Procreate and the zoom/image fit to paper correlation.. Any tips?

@KillerInkTattooEU 2 года назад

Hey Emily, if you email info@killerinktattoo.co.uk about this, one of the team will be able to look into it for you and suggest some tips and settings to use.

@chrismifsud3042 3 года назад

The 763 is good for ipad or the 773 is good for ipad pls?

@KillerInkTattooEU 3 года назад

Hi Chris, you'd be best with the 763 in this case because of the integrated iAP (MFi) Bluetooth profile.

@Richiebones 6 месяцев назад

Hey brother i am tying to find a printer i can do this with i bought a cheap hp and tried doing it with no luck

@shavedmonkey9821 2 года назад

they are great for a few years then you will need new batteries...all i use is brother....i have a3 thermagraph for backup as these PJ,s don't like being dropped...they fall to bits

@cerchiniosimon9466 4 года назад

And after all this time now they make this video ...... we needed this video years ago because i bought the wifi thinking that the bleutooth one will not connect to my ios devices now i cant go in set up

@CasparMuetze Год назад

I am looking for the App to control the density settings but I cannot find it, not in the app store, or on brother supprot?! Can you post a link to that one please?

@KillerInkTattooEU Год назад

Hi, you can download the app here: apps.apple.com/gb/app/brother-iprint-scan/id382775642

@CasparMuetze Год назад

@@KillerInkTattooEU ah thank you... this explains a lot: only for phone and ipad. not available for my Mac :(

@KillerInkTattooEU Год назад

@@CasparMuetze Hey, you can try to download it here: apps.apple.com/us/app/brother-iprint-scan/id1193539993?mt=12

@shavedmonkey9821 2 года назад

Any idea why the rollers stick to the stencil sheets

@KillerInkTattooEU 2 года назад

Hi, the rollers are rubber, so they shouldn't really be sticking. You're best checking the print speed and density settings first, as heat build-up can cause it to 'stick'.

@rustyneedles3743 3 года назад

So, question ? am I able to purchase this directly from Brother NZ ? "www.brother.co.nz/mobile-printers/pocket-jet/pj-763mfi" question is though, will it work, I purchased one a few years back, but it didn't work all, no matter what I did, I was told that it had something to do with the firmware/driver ? is this right ? or did they sort the problem with it not working from the manufacturer

@KillerInkTattooEU 3 года назад

Hi, all you need to do is check that the firmware is up to date and install print settings tool, which allows you to switch on stencil mode and change speed/density, etc. If you purchase a printer from us, we already update the firmware and switch stencil mode on. If ordered from Brother, it will arrive as factory standard.

@joannaguy-fisher5434 3 года назад

Ive just bought pj 763mfi (not from killer ink) how to i get it set up for stencil mode

@KillerInkTattooEU 3 года назад

Hi Joanna, just install Printer Settings Tool off the Brother website. On the program (when connected to the printer), select Maintenance>Stencil Paper Mode and then select 'On', then 'Apply'.

@joannaguy-fisher5434 3 года назад

@@KillerInkTattooEU fantastic thank you

@juicyfied87 2 года назад

At 41 min. Is that the pj-763 or pj-763mfi? I got the pj-763 and I can’t get it to print from the print app only from my Mac book connected to it.

@KillerInkTattooEU 2 года назад

Hi, that's the PJ-763MFI model.

@juicyfied87 2 года назад

@@KillerInkTattooEU Is there any way I could connect my iPad to the 763? I bought it thinking it was the 763MFI. 🤦🏻‍♂️

@KillerInkTattooEU 2 года назад

Hi, from the Brother website: "only the PJ-763MFI can be connected to your Apple devices via Bluetooth."

@Papadananas 3 года назад

If it’s possible, how to connecte 763 (not mfi one) with Ipadpro ? HELP

@KillerInkTattooEU 3 года назад

Hi, unfortunately we do not stock this model, so we recommend you contacting Brother direct.

@kendrawalton322 3 года назад

I have a pj 773 printer and it stops in middle of printing then shuts off. Do you have any suggestions on how to make it print until the stencil is finished.

@KillerInkTattooEU 3 года назад

Hey Kendra, does the "Data" light stop as well? If so, it might be an issue with the page set-up while printing. If not, please email your issue to info@killerinktattoo.co.uk and they will be able to advise you further.

@kendrawalton322 3 года назад

The stencil will start to print, after a inch to two inches into the print the printer will power off. Power light cuts off, Data light cuts off, and Wifi light cuts off.

@KillerInkTattooEU 3 года назад

@@kendrawalton322 Hi Kendra, can you please email info@killerinktattoo.co.uk about this and we'll be able to assist you further.

@rubymendez889 Год назад

Have same problem SoS!!!

@danielgrimberg3617 Год назад

Hi i have an 733 and is it possible to turn on stencil mode afterwards? Or how do I know if it is in stencil mode?

@danielgrimberg3617 Год назад

I mean 773

@KillerInkTattooEU Год назад

Hey Daniel, It is! Use the Printer Setting Tool and the option will be on there.

@danielgrimberg3617 Год назад

@@KillerInkTattooEU okay thank you!

@nicoj6718 Год назад

i make this same and my 763mfi eating the paper can any help?

@KillerInkTattooEU Год назад

Hey Nico, skip the video to 32:44 for advice on how to stop the printer creasing your paper. If you are still having issues it may be down to not guiding the paper through properly, the stencil mode may not be on or it may need an alteration in the design or printer settings.

@Tattoo._talk Год назад

Can multiple people be connected to the “763 mfi” at the same time?

@KillerInkTattooEU Год назад

Hey Andrew! It can be paired and recognised by multiple devices for a quick connection, however you cannot connect and print from multiple devices at the same time.

@stevesmith3731 Год назад

I have a pj773 I think it’s printing too fast how do I slow it down?

@KillerInkTattooEU Год назад

Hey Steve! Go to the Printer Setting Tool and change the print speed under "Device Settings".

@gustavoparedeslabrana2141 Год назад

Hi, the pj763 (not pj763 MFI) works with IOS devices ?

@KillerInkTattooEU Год назад

Hi, unfortunately the standard PJ-763 model is not compatible with iOS.

@Xicaslam 2 года назад

I have that printer and many times it’s very dissatisfied trying to print out and going my hands purple. I tried multi,as all this steps nos still no printing like the last picture … to much money for a normal termal printer

@KillerInkTattooEU 2 года назад

Hi Evelyn, we suggest cleaning the rollers and making sure that Stencil Mode is turned on in the settings. You can also update the firmware and see if that helps. If it still doesn't work, please contact us on info@killerinktattoo.co.uk (or wherever you purchased the printer from).

@user-do3jd4hy5j Год назад

Is it copied only by Usb communication? Is it not possible to make a copy of the print method of printing?

@KillerInkTattooEU Год назад

Hey! Paul shows and explains the range in the video.

@SuperINMENSO 2 года назад

HLA TENGO LA PJ-673 Y NO ME FUNCIONA EN MI MACBOOK PRO VERSION 10.14.6 DONDE PUEDO DESCARGAR LOS DRIVER QUE HAGAN FUNCIONAR LA IMPRESORA. GRACIAS

@KillerInkTattooEU 2 года назад

Hi, you can find the drivers here: support.brother.com/g/b/downloadtop.aspx?c=us_ot&lang=en&prod=pj763eus

@SuperINMENSO 2 года назад

@@KillerInkTattooEU al parecer perdí mi dinero en esta compra .no tienen app disponibles para Android o tendré que comprar un pc para poder trabajar . Gracias

@KillerInkTattooEU 2 года назад

@@SuperINMENSO You can download the necessary drivers for your Macbook via the link we sent. Click "Mac" under "Step 1" then select your OS version (in your case it would be "macOS 10.14.x". If you're still having issues, please contact Brother directly or send us an email to info@killerinktattoo.es if you purchased your printer from us.

@coffiepower Год назад

my Ipad nor Phone can find the bluetooth pairing how do I fix that??

@KillerInkTattooEU Год назад

Hi Freddy, we would suggest double checking whether the device and printer have the latest firmware. You can also have a little look on Brother's troubleshooting page here: support.brother.com/g/b/faqend.aspx?c=us_ot&lang=en&prod=pj763mfieus&faqid=faqp00100217_000

@Biggiefinger Год назад

25:23 alcohol pad how many percent?

@KillerInkTattooEU Год назад

Hey, They are 70% Isopropyl Alcohol. They can be purchased on our site here: www.killerinktattoo.co.uk/box-of-200-reynards-alco-wipes

@mckaymckaymckay Год назад

I have had issues with my PJ 763-MFI stopping half way through my stencil and turning off. I’m using it through Bluetooth and plugged directly into the wall. Has anyone else had this issue? And does anyone know how to fix it?

@carloscanales8028 Год назад

I just bought a ac/dc adapter 12v 2amps on Amazon for 6$ and it works. Had the same problem with a 12v 1.3 amp adapter so close but still didn’t work it would turn off half way too, because the amps were a lil bit low.

@KillerInkTattooEU Год назад

Hey, feel free to email a video to info@killerinktattoo.co.uk and a member of the team will take a look for you!

@fanzatattoos3016 3 года назад

Hi i want to know something.i have like this printer.but i tray to do printer tattoo.but its stuck.can i know why its stuck

@KillerInkTattooEU 3 года назад

Hi, it could be a few things: • Not guiding the paper through and letting it crease/roll up • Print density too high • Image is too dark/saturated • Roller needs cleaning Hopefully rectifying any of the above will help, but if in doubt, please feel free to email us at info@killerinktatto.co.uk

@fanzatattoos3016 3 года назад

@@KillerInkTattooEU Hi

@fanzatattoos3016 3 года назад

Hi we use adobe photo shop.if we have to used some special software

@KillerInkTattooEU 3 года назад

Hi, using Adobe Photoshop will be fine. You can also update the firmware of your printer (available through the Brother website) and install the Printer Settings Tool (also from the Brother site), which will allow you to check if 'stencil mode' is on and change the print speed and density. If you have any further queries, please don't hesitate to get in touch with our team via email at info@killerinktattoo.co.uk

@ricky15913 2 года назад

Can I connect pocket jet 763 to wifi

@KillerInkTattooEU 2 года назад

Hi Rick, the PJ-763 is Bluetooth only. The PJ-773, however, offers Wi-Fi connection.

@rd9games259 3 года назад

28:50 mine doesn’t let me adjust if I need too.

@KillerInkTattooEU 3 года назад

Hi, if you lift up the lid of the printer, that should give you a bit of space to be able to move the paper around.

@imbadman6658 3 года назад

Having problem with mine. It won’t print, it always go on data storage mode, Even i turn it on and off. I already did all the troubleshooting that i have read in brother website. Still doesn’t work.

@KillerInkTattooEU 3 года назад

Hi, can you let us know which model you are using please?

@imbadman6658 3 года назад

@@KillerInkTattooEU brother PJ-763mfi

@imbadman6658 3 года назад

@@KillerInkTattooEU i used it for only 4 months , still under warranty

@KillerInkTattooEU 3 года назад

Does the data light come on and will not clear, even if you run through a sheet or two?

@imbadman6658 3 года назад

@@KillerInkTattooEU yes, still on. And when i long press the “feed” button it will shutdown. Also i try to long press the “feed” button it also turns on. And when i press the “power” button its acting like a “feed” button.🤦🏻

@barrynoon3007 3 года назад

What about the 722

@MambusBambus 3 года назад

I thought about the same thing..

@alexandrapintilie8410 2 года назад

Mine keesp jamming the paper every damn time I cant do a proper stencil with it I just don't know what im doing wrong

@KillerInkTattooEU 2 года назад

Hi Alexandra, it will either be to do with alignment troubleshooting or the need to change print density. If the paper is not put in straight, the print density is too high or the reference is too saturated, it can cause jamming. You can check out the section about paper creasing at 32:44.

@slimshady7052 2 года назад

Сколько должен быть блок питания?! У меня 12v 4.5a Жует бумагу всегда, не знаю что делать😥 pj-762

@KillerInkTattooEU 2 года назад

Hi Evgen, you can find the power supply here: www.killerinktattoo.co.uk/brother-pocketjet-pj-723-cord-ac-adapter-uk

@slimshady7052 2 года назад

@@KillerInkTattooEU сегодня нашел блок питания 12v 5a теперь всё работает! Вы спасли мне жизнь! Спасибо большое! Я год не знал что делать, сдавал в ремонт в сервис, без результата, поменял блок и хорошо стало!!!

@bringbackthe80s61 2 года назад

pj-763 with bluetooth does not work with apple products unless its a pj-763MFI (made for ipad)

@KillerInkTattooEU 2 года назад

Hi, that's correct, but we only offer the PJ-763MFi on our site (not the PJ-763).

@tinamanzo6073 3 года назад

U need to tell ppl there is 2 different pj763 there is the regular one and pj 763 MFI THE PJ763MFI IS THE ONE THT CONNECTS WITH IPADS , not the reg pj 763

@thomasfarr16 3 года назад

They shoulda pinned this there tablet looked like trash.

@alicjamazurart 3 года назад

Hi how i can connect PJ-763 with iPad pro? Have bluetooth but it doesn't works. My iPad cannot be connected with brother. I need cable?

@azticbangz1792 2 года назад

@@alicjamazurart same? I’m having the same issue…

@alicjamazurart 2 года назад

@@azticbangz1792 I downloaded the application, I send the project by e-mail and print it from my phone, there is no other option in my model. LG

@damienmorgan855 Год назад

So can you print a tattoo stencil straight from procreate?

@chrissilk4093 Год назад

Where do i get the ac adaptor for the 763?

@KillerInkTattooEU Год назад

Hi Chris, we have this adapter available to order here: www.killerinktattoo.co.uk/brother-pocketjet-power-cord-ac-adapter-uk

@chrissilk4093 Год назад

@@KillerInkTattooEU Brilliant thanks,i have ordered it now.

@chrissilk4093 Год назад

Also how do i get the stencil mode to work on the 763mfi or is it done automatically with ios updates?

@KillerInkTattooEU Год назад

@@chrissilk4093 Hey. Plug it in to a computer and tick stencil mode on Brother's Printer Setting Tool. If you are having any issues, feel free to get in touch.

@chrissilk4093 Год назад

@@KillerInkTattooEU Thanks however after enabling Stencil mode,it barely leaves an image even with everything set to max density and full opacity through procreate.

@julianalexander3763 3 года назад

So The 723 model does not connect to your iPad?

@KillerInkTattooEU 3 года назад

Hi Julian, that's correct, it's just a USB plug-in option - no wireless connection like the others.

@julianalexander3763 3 года назад

@@KillerInkTattooEU oh man I recently purchased one without being aware it was the 723 until it arrived and possibly cant return it.. if that’s the case will buying a USB adapter work for the iPad & printer to be compatible?

@KillerInkTattooEU 3 года назад

Unfortunately we can't vouch for the compatibility of third-party adapters.

@julianalexander3763 3 года назад

@@KillerInkTattooEU recently got the 773 & it’s not printing but does connect and receive the data any tips for what I can do? Thanks

@romandruckt4752 2 года назад

I think over 500€ for a little Printer without the battery and WITHOUT the PowerCord is like to buy a TV without the remote and the remote than cost 1/3 off the TV. Only they know this printer can use for stencil making. Years ago the police had this in their cars. Nobody thought about to use it as a stencil printer. Seems they think Tattooartists can grab deep in the pocket……

@br4ndon21 3 года назад

Why does my printer turn off half-way through

@KillerInkTattooEU 3 года назад

Hi, can you please email info@killerinktattoo.co.uk with your issue and one of the team will look into it.

@rubymendez889 Год назад

Same problem help please!!!

@xaverart5501 2 года назад

Scan or Photo Free heand drewing!

@hopedaives8950 Год назад

Can anyone tell me the price in US $ , please ...

@KillerInkTattooEU Год назад

Hi Hope, you can email info@killerinktattoo.co.uk for assistance with this.

@Thirdfish 4 года назад

Mine is an absolute pain in the arse to use, I'm here to see what I'm doing wrong, cos it has to be human error cos Brother make great printers.

@hifi8844 3 года назад

It is a pain to use your better off using one of them thermal heat ones with a light you switch on way better. This is good for conventions

@Thirdfish 3 года назад

@@hifi8844 Yeah man noted, think you're right there. ;)

@Thirdfish 2 года назад

It was the Brother adapter that was too hot at 4A, that's usually for thicker fax paper, switched it to 2A and works a treat. Bit late with this ha ha.

@yungdark4826 Год назад

What does he think about ? BROTHER PJ-883,???

@AlinLinu Год назад

I have a poket jet 3 (brother ) can someone tell me if i can find drivers for macOs or ipadOs ?

@KillerInkTattooEU Год назад

Hey, we would advise just checking directly on the Brother website and looking through the list of drivers on there 😊

@AlinLinu Год назад

@@KillerInkTattooEU yeah it’s not available

@andyhowden7655 2 года назад

I'm confused he says it need to be black but I thought this put all the lighter shading in the stencil.

@KillerInkTattooEU 2 года назад

Hi Andy, Paul means that it should be monochrome.

@andyhowden7655 2 года назад

@@KillerInkTattooEU I've just purchased the standard version (without blue tooth wirless) I've played around with the settings and don't seem to be getting much of a gradient it just seems to want to pick up the pure black values and hardly any lighter tones at all regardless of density.

@KillerInkTattooEU 2 года назад

You may need to darken the reference first. If you're still having issue, feel free to email us at info@killerinktattoo.co.uk and one of the team will be able to assist you further with this.

@andyhowden7655 2 года назад

@@KillerInkTattooEU thanks guys

@aaronfell1816 Год назад

Have just bought a pj 763. Its chewing up the paper nearly every fucking time. Close to throwing it out the window.!!

@KillerInkTattooEU Год назад

Hi Aaron, you can check out the section from 32:44 about this. The paper needs to be lined up, as well as making sure that the reference and print settings are right. Your printer may be catching the paper because the reference is either too dark or paper not aligned.

@graphosxp 3 года назад

Is Paul Talbot "The legendary hitchhiker"? I would like to think so! "The legendary hitchhiker says that he knows where it's at Now he'd like to go to Spain or somewhere like that With his two-tone Bible and his funny cigarettes, His suntan lotion and his castanets He was waiting for the end of the world...." Also he was waiting for his thermal printer to cool down!

@wr8295 2 года назад

paper is entangled

@KillerInkTattooEU 2 года назад

Hi, please can you send a video of the issue to info@killerinktattoo.co.uk or via Facebook or Instagram DM and one of the team will look into this for you.

@user-if5me3id4c 4 года назад

I have purchased PJ-723 printer recently and this model does not support Android phones? I have downloaded the app but doesn't work 🥺

@KillerInkTattooEU 3 года назад

Hi, the PJ-723 simply connects to your computer via USB, so there's no wireless/app printing.

@user-if5me3id4c 3 года назад

@@KillerInkTattooEU Yes it does connect with the computers but not the phones.

@mikoajzych2623 Год назад

Why is everything so expensive ffs…

@utewidjaya8236 2 года назад

PJ-723 expensive price poor quality. I've repeatedly set it... the prints are too light and can't print darkes or fine lines and don't produce sharp prints as advertised. regret buying it...

@KillerInkTattooEU 2 года назад

Hi, if you bought your printer from us, please contact us on info@killerinktattoo.co.uk and one of the team will be able to assist you with this. Otherwise you can contact Brother directly for troubleshooting.

@utewidjaya8236 2 года назад

@@KillerInkTattooEU ok... thanks..