Available in Australia: bit.ly/2Tx1fLy NZ: bit.ly/2Hx2eVb
Aligning a clutch disc, pressure plate, and gearbox shaft after replacing the clutch - need not require a perfect eye and uncanny skills. The ToolPRO Universal Clutch Aligning Tool is all you need.
The 6 simple parts in this kit will ensure that every piece in the clutch assembly lines up - before you even place it on the flywheel.
First of all, select a collet from the three available. This should match the splined hub as closely as possible. Assemble the tool with the splined hub as shown, and thread the brass nut onto the back.
Ensure the clutch disc is facing the right direction; and place the pressure plate over the top. Now insert the tool, ensuring the plastic collet locates inside the spline. Hold the tool steady, and tighten the brass nut firmly.
Tighten the large plastic nut against the fingers of the pressure plate, just enough to hold it all steady - then turn the pressure plate over. There should be just enough pressure on the clutch disc to hold it steady, yet still be movable with slight force. Slide the clutch disc around until it is dead centre on the pressure plate - then further tighten the large plastic nut to ensure it doesn’t move.
At this point your clutch assembly is ready to be mounted to the flywheel. Just fasten the pressure plate to the flywheel before loosening the large plastic nut on your aligning tool - and removing it completely.
The pressure plate will hold the clutch disc in place, and make lining up the gearbox shaft a breeze.
It’s a tool you may only use once or twice. But when you do; you’ll be so glad you have it.
---------
Supercheap Auto Website: bit.ly/1FpfKkw NZ: bit.ly/2rK6Lg5
RU-vid Channel: bit.ly/2sjZ92q
Like us on Facebook: bit.ly/1Ry7HuN
Supercheap Auto Blog: bit.ly/2UuYUxb
---------
Watch our latest and greatest television ads, Check out our how to videos, product videos or learn how to check it!
30 сен 2024
