How to use all Effects in Xlights

Подписаться 6 тыс.

Просмотров 18 тыс.

50% 1

------------------------------------PLEASE READ---------------------------------------
I am very sorry for not uploading in almost a month. My family and I went on vacation, and it's been hard for me to get back into the routine of making videos. I'm also finishing up with school for the summer and have been really busy. But I hope to get back into uploading once every week or 2. I also didn't get to watch the video completely through, so sorry if there's any editing mistakes.
IN TODAY'S VIDEO:
Today in this video, I explain how to use all the different effects in xlights. There are 7 effects I did not go over because they need particular files uploaded or layer blending used which I've not gone over how to use. This video is very long, so if there's a specific effect you want to know how to use, use the timecodes below. If you have any questions or comments feel free to leave them below!
Timecodes:
00:00:00 - Intro
00:03:10 - How I'll be showing the effects
00:04:02 - Off
00:04:47 - On
00:07:32 - Bars
00:10:06 - Butterfly
00:11:29 - Candle
00:12:24 - Circles
00:13:37 - Color wash
00:14:21 - Curtain
00:15:46 - Faces
00:18:37 - Fan
00:20:40 - Fill
00:23:54 - Fire
00:24:45 - Fireworks
00:27:10 - Galaxy
00:29:00 - Garlands
00:30:47 - Life
00:31:26 - lightning
00:32:50 - Lines
00:33:53 - Liquid
00:36:20 - Marquee
00:38:04 - Meteors
00:39:45 - Morph
00:40:40 - Music
00:41:53 - Piano
00:42:42 - Picture
00:45:35 - Pinwheel
00:47:19 - Plasma
00:47:51 - Ripple
00:50:25 - Shapes
00:54:20 - Shimmer
00:55:19 - Shockwave
00:56:28 - Single Strand
01:00:33 - Sketch, NEW EFFECT
01:04:29 - Snow Flakes
01:05:40 - Snow Storm
01:06:24 - Spiral
01:07:55 - Spirograph
01:09:02 - Strobe
01:09:36 - Tendril
01:11:05 - Text
01:13:43 - Tree
01:14:33 - Twinkle
01:15:15 - Video
01:17:07 - VU Meter
01:18:33 - Wave
01:19:35 - Finishing up
Subscribe and hit the bell so you'll get notified when I release new videos, and leave a like if you enjoyed!
For more information about the show, or to see it in person, visit our Facebook page at: / bridgeportsbrightestli...

Развлечения

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@MrBilllynch Год назад

well done; an excellent primer for intermediate xlighters like me. "life" is an implementation of Conway's game of life, which was a popular 70s computer "game". There's rules about regeneration, birth, and death based on number of nearby cells and people made up patterns that would repeat, be stable, move. It was, and probably still is, quite fascinating.

@cheeseshark Год назад

"Life" is an old computer game developed in the 70's. The premise is that if a pixel had 0 or 1 lit pixel next to it, it would die of "lonelyness", if it had 4 or more pixels lit next to it it would die from "overpopulation" and if it had 2 or 3 pixels next to it, it would stay alive. It effectively creates a decaying effect of pixels based on the above rules.

@WolfHunter1043 Год назад

Again great video! Opens my eyes on some of the features of XLights! Keep them coming!

@505Lights Год назад

Wow, you really put in a lot of time in this one. Thanks for all the details. I didn't realize how much you could customize each effect.

@How2Pixel Год назад

Yeah there's a lot of options!

@keithhuggins8531 Год назад

Thanks for this video, Good job going through all of that

@How2Pixel Год назад

Thank you!

@kirtxpress 6 месяцев назад

Thanks for all your videos. They are very helpful

@How2Pixel 6 месяцев назад

Glad they are useful!

@richtodaro9919 Год назад

Dud you are awesome - Thank you soo much!

@wantafastz28 Год назад

Thanks for this.

@meowdy0295 Год назад

I appreciate this so much! You saved my Christmas! First year sequencing, couldn't have done it without you

@How2Pixel Год назад

You're welcome and thank you for the comment! I'm very glad this was able to help you out!

@hauntfinder4898 6 месяцев назад

This is great for my show

@craigr306 6 месяцев назад

You smart guy learning off you

@jesuschavez2310 2 года назад

Hi, i really enjoying ur video, it is helping me a lot. I do a model of a full tree, with some sub models. I wonder to know how to apply the same effecto on the hole tree but use the diferents colors on each submodel

@How2Pixel 2 года назад

Well you could double click the model in xlights in the sequencing section, then put the effect on each of the sub models and change the color for whichever ones you like

@xdandev1991x 8 месяцев назад

@59:26 - are those the same effects in WLED? That FX tab list looks familiar to my ESP32 with WLED installed.

@How2Pixel 8 месяцев назад

I'm not quite sure, I'm not familiar with WLED

@bryanhernandez34 Год назад

Im trying to use the effect video but is not working, it does not let me add a duration to the video

@How2Pixel Год назад

If the sequence is shorter than the video, you'll have to make the sequence longer to fit the entire video. If it's an animation, you can simply go into the sequence settings and add how many seconds long you want it. If it's a musical sequence, then you'll need to make the audio file longer to fit the video. If you're using the video's audio file then you shouldn't have a problem. Did you make sure you made the effect long enough for the video or tried using the duration button in the effect settings?

@denn450 2 года назад

hi there hope you had a great vaction and i hope you finish your school go all the way you could do it so i have a question again in your light show do you have 2 power surply connect together because i want to know if a 350 watt power surply could run 1500 ws2811 at 30 percent brightness there 5 volts pixels and i would like how you connect 2 power surply together

@How2Pixel 2 года назад

So I'm not quite sure if you can run 1,500 pixels on one power supply, it depends on how many amps your power supply can handle. 1,500 lights at 30% in 27 amps so as long as the power supply can do at least 27 you'll be fine. You can connect 2 power supplies off of one outlet. What you do is screw your wires into your power supply like you normally would, but add an extra wire to each terminal. Then take each of those wires and screw it into your second power supply. Do not cross the wire!!!! if you do your power supply will break and possibly catch on fire. Whatever wire comes from the neutral terminal goes to the neutral terminal on the second power supply, whatever wire comes from the load (hot) terminal goes to the load terminal, and the same with the ground. keep them on the same terminal.

@denn450 2 года назад

so if i do that add a power surply i would be able to run 1500 pixel and more could i use the second power surply to power inject also thank you

@How2Pixel 2 года назад

You should be able to run 1500 pixels off of one power supply as long as it says it can hold the amperage. If it can't then you will need 2. You can also power inject off the same power supply as long as like i said it wont take too many amps.

@orlando22710 Год назад

Do you have a video of xlights using ws2811 pixel lights?? Like string lights??

@How2Pixel Год назад

I do have a video that explains how to fully use xlights, and this does apply to every type of pixels. It is a little long, almost 3 hours, but there are timestamps in the video, so you can skip to the part you need. Let me know if this video helps or if you're looking for something else! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4Z3G0rb5SZ8.html

@orlando22710 Год назад

@How 2 Pixel hey thank you brotha for getting back to me, you're shows are dopppeee

@blackdave8525 Год назад

Hi great show as always , i have an issue with the xlights and falcon , they all seem to sync to the tree effect and i want the other props to do there own colors but there syncing to the tree colors the same , i change straight bars on roof to say a red sparkle and there doing the same colors as the tree , how do i change this so each one does it own color ? any help welcome .

@How2Pixel Год назад

What it sounds like to me is you're using the effect on a group model. If you are move the effect to just the prop you want to light up. If you already have it that way, try rending the sequence by pushing the paint palette button. It will render your sequence and may fix any problems. Let me know if that works!

@blackdave8525 Год назад

@@How2Pixel HI in fpp in channel 1 i have 600 for a tree , i then have a receiver with the 4 ports , i put top , middle , porch ,arches , in the 4 receiver ports , it says 1 overlaps 9a and so forth what am i doing wrong ?

@nigussietsegaye7343 Год назад

Wow it is so interesting ,how can i get the software?

@How2Pixel Год назад

It's free to download on www.xlights.org

@danyf3116 Год назад

First of, I must say I am impressed in the way you explain stuff. For that, I subscribed to your channel. Second, I was a sucker buying a sequencer called Aurora Borealis and the owner/creator never made his shit available for ANY other software out there, to be able to be imported. Having said this, I regret not having jumped on Xlights/Nutcracker when it was out there. I thought I was doing better having a proprietary software. All the sequences I have ever made or created in Aurora, are all trashed because of this. I am not new to sequencing so that is the only plus in my bagage. I need to know how Xlights works and what it does and this video as simple as it is, is full of good tips. I understand quickly when you explain for a long time!!!! LOL ☺ Thanks for the tips and for those looking for help, this guy is good to help noobies like me/us.

@How2Pixel Год назад

I'm so sorry for the late reply, as you could imagine I'm really busy setting up my show. But I'm super glad my videos were able to help you out! And thank you for the subscription!

@danyf3116 Год назад

@@How2Pixel I'm sequencing, building items and building controllers. All in hopes to be ready for the 1st of December!!! My army days helped me cope with stressful situations. You can say I work best under stress!!!! LOL