How to use Behringer HA 8000 - a headphones distribution amplifier

Подписаться 87 тыс.

Просмотров 5 тыс.

50% 1

Disclosure: This post may contain affiliate links, meaning I get a commission if you decide to make a purchase through my links, at no cost to you.
get it on Amazon : amzn.to/4cVijjN
audio cable I use : amzn.to/3KjLP5l
#review #howto #behringerha8000

Видеоклипы

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@CinderB 4 месяца назад

Hi! We have been using this unit for quite a while now, and I find everything to be very loud. Any help with this? We get the input signal from an aux send from our mixer, which is set already very low. From there, the master gain on the HA8000 is also set at almost zero, and every channel is relatively low, but still, we find each in ear to be really loud.

@frankfarago2825 4 месяца назад

Basically, this device split one signal 8 ways. Much better is the Behringer model that has only 4 headphone outputs, as you can adjsut each of them much more precisely.

@soymartino 4 месяца назад

depends on if you use direct inputs of each channel or not...in my case , I just use Main Input and each channel gets the same mix, I adjust only Volume of each channel separately...but if you use Direct inputs of each channel, then you can use up to 8 different mixes...

@nicolestixxx6755 21 день назад

@@soymartino Hello great video! Can you explain how you can receive 8 different mixes? You stated to use direct inputs of each channel, but how does one do that? What audio interface should I use?

@Mikey-x4l Месяц назад

How does back look like I need to know😢😢😢

@DC-pt1zr 6 месяцев назад

So you can have up to 18 headphones connected to this with 2 headphone outs per channel?

@soymartino 6 месяцев назад

you can connect up to 16 headphones...8 different mixes

@rhys.finance 4 месяца назад

When I plug my setup like you did, I get very bad distortion/artefacts coming through the headphones which I think are coming from my interface

@soymartino 4 месяца назад

you don't have to route the signal from headphone output to main 1 or 2 ... if your audio interface has more outputs, you can try to route signal from there... I just had all other outputs engaged with other devices, that's why I have chosen headphone output...