How to use Cadlink Digital Factory for DTF Printing - Cadlink DTF Tutorial (Quick Guide)

Подписаться 13 тыс.

Просмотров 38 тыс.

50% 1

#KingdomDTF #Cadlink
📺 Subscribe To My Channel and Get More Great Tips
ru-vid.com?...
👍 Support Group
/ 1432671203560213
In this video, we take a look at a quick guide for CADlink Digital Factory v10 or v11 for DTF Printing. Don't forget to check out our DTF Supplies and DTF Printers, you can do cotton, polyester, blends, spandex, flex, etc. Our most popular and affordable DTF Printers are perfect for use for a hobby of all sizes, from homes to small businesses to start scaling up. DTF is of exceptional quality and choice that prints on dark and light t-shirts.
If you like to support us in one way or another, consider getting your supplies and equipment from us through the links below. Check out the links below for DTF Printers & DTF Supplies, Waterslide Paper, and DTG Supplies.
_________________________________________________________
DTF SUPPLIES & DTF PRINTERS
► DTF Printers: kingdomdtf.com/collections/dt...
► DTF Inks: kingdomdtf.com/collections/dt...
► DTF Transfer Films: kingdomdtf.com/collections/dt...
► DTF Powder: kingdomdtf.com/collections/dt...
► Bundles: kingdomdtf.com/collections/bu...
► Supplies: kingdomdtf.com/collections/su...
► Software: kingdomdtf.com/collections/so...
► Parts: kingdomdtf.com/collections/parts
► CISS/Ink Cartridges: kingdomdtf.com/collections/in...
► Printing Partners: kingdomdtf.com/pages/creator-...
► DTF Transfers Sample: kingdomdtf.com/collections/dt...
► Financing: kingdomdtf.com/pages/financing
► DTF Consultation and more: kingdomdtf.com/collections/se...
►► CADlink DF 10 Trial kingdomdtf.com/products/cadli...
_________________________________________________________
AFFILIATE PROGRAM
Make money easy with our affiliate program. FREE to register and easy link & code to share!
► Affiliate: kingdomdtf.com/pages/affiliate
_________________________________________________________
WATERSLIDE PAPER
► kingdomdtf.com/collections/wa...
_________________________________________________________
DTG PRINTING & SUPPLIES
► kingdomdtf.com/collections/dt...
_________________________________________________________
FOLLOW AND LIKE US ON SOCIAL MEDIA
► WEBSITE: KingdomDTF.com
► FACEBOOK: / kingdomdtf
► INSTAGRAM: / kingdomdtf
► SUPPORT GROUP: / 1432671203560213
► Email me for business at sales@KingdomDTF.com
_________________________________________________________

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@ARMA2ARMENIA 7 месяцев назад

Great pro video, thank you.

@zzx2879 7 месяцев назад

Hi, i have a duel head xp600 printer, how do i setup the color for this printer?

@DestinyBlossom 4 месяца назад

When I upload any photo to cadlink, the quality is terrible on the preview side, even photos that come directly from their test pages. It’s grainy, blurry and ineligible. Any solution?

@slavcik964 Год назад

Hi. Please tell me how to configure the color profile.The prints are pale. I have an Oki pro 9420wt printer. Thank you in advance🤝

@marjorielaureano9842 9 месяцев назад

I have an epson L1800 but it just printing black and gray, what im doing wrong? Thanks for the help!

@sarahkissekburg2530 11 месяцев назад

When trying to set up ink order it says I can’t have more then one??

@CStephen Год назад

Hi...I noticed the subject says et-8550, does this software work with that specific printer as well? Also, noticed it says XP-15000, does this work with the ET-15000 as well? thanks

@KingdomDTF Год назад

Yes, we sell this software and many customers have ET-8550.

@markanthonypanao1120 8 месяцев назад

Hello, How can I download the v2 driver for my l1800? I can't setup my color order. Thanks

@deeznuttz7980 11 месяцев назад

my set ink order is not highlighted cant press on it

@31BLACKSTA 5 месяцев назад

Can someone please help me I printed my first print but it came out all black I’m not sure what I did wrong

@adlb3984 4 месяца назад

Hi! I just bout an A3 L1800 DTF Printer (from China) The RIP software they sent is absolutely horrendous! Will this software work with my model? If so, do you have a purchase link? Also, is it a software download only or do I need to have the CAD USB connected?

@smbarak2000 Год назад

hi, what is the difference between small and large as seen in internet shops

@KingdomDTF Год назад

small and large?

@tristanw1982 Год назад

Hi, I'm installing this software and using xp15000 but can't seem to find xp15000 driver on the create queue wizard. Do you have any ideas on how to install this software using the xp15000. Thank you.

@KingdomDTF Год назад

type epson and it will show all the available printers.

@kerrababy8104 Год назад

im new to this and for some reason my set ink order is greyed out and im using an epson xp 15000 any suggestions on what that could be.

@KingdomDTF Год назад

Need to install the driver for the printer.

@streetpoet123 Год назад

How do I fix lines in my image that allows the white underbase to show when printing?

@KingdomDTF Год назад

Did not understand your question well. Try doing head cleaning.

@user-ou9vh4se9e Год назад

I have an epson 8550 and cannot get my printer to print using the CadLink program. I've got it installed but not sure how to set anything else up since it will not connect

@tamiar2882 Год назад

Same here! Have you been able to figure it out?

@jcane5513 10 месяцев назад

I also am having this issue, were you able to get it resolved?

@DEEPANJANHORE Год назад

I do not have cadlink, but I want to buy it for DTF with ICC Profile Creation Addon, for that Do I need to purchase Cadlink twice?

@KingdomDTF Год назад

Cadlink is the rip software, the icc profile creation is an add-on module for the software, they have deferent pricing.

@DavidAntunezYB Год назад

HEY HOW YOU DOING ? I HAVE A QUESTION MAYBE YOU CAN HELP ME WITH. SO I HAVE CADLINK DTF WITH MY EPSON 8550 RIGHT. SO FOR THE PAST 2 DAYS EVERYTIME I TRY PRINTING MY IMAGE USING MY CADLINK IT DOESNT PRINT THE WHOLE IMAGE. ITS ONLY PRINTING HALF OF THE IMAGE. WHAT DO YOU THINK ITS THE PROBLEM?. THANK YOU.

@KingdomDTF Год назад

When this happens people usually put blue painter's tape or masking tape to the back of the film at the edge so the printer reads better as "paper".

@chillworksdev4145 Год назад

Hi! I am new to this software, but for some reason, every single time I print, it stops halfway through and says Unknown Error. This does not happen with any of my other programs, just this one, so it's not a problem with the printer. What do you think it could be? How do I check this kind of error? Thank you.

@KingdomDTF Год назад

sounds like a software issue, I recommend calling Cadlink 1-888-744-6522

@googlesheetsph Год назад

I've fixed by connecting thru wifi connection. Connect your printer to your wifi router then in the manage queues select TCIP/IP (Network) for the port selection scan and select your printer.

@jg6music48 7 месяцев назад

It's because you didn't set up or download the right printer driver

@etm16 Год назад

I am having an issue with my xp15000 starting print 2 1/2-3" down the sheet. How do I adjust that?

@KingdomDTF Год назад

Try to put masking tape or painter blue tape at the border of sheet since xp15000 sometimes don't see the film.

@shaylinmuller4685 Год назад

Hi I followed all the setup videos but everytime i print it only prints the center strip of every image, is there a setting im missing?

@KingdomDTF Год назад

That mean the printer is not seen the full film since they are semi transparent. Put more paper on the back for support , cover the sensor of the printer with masking tape or put some masking tape at the border of the film so the printer can grab it better.

@shonettemontgomery2845 Год назад

hi my printer is only printin part of my image. matter of fact just a section of the middle in a rectangle how do i fix. my preview shows the entire picture but thats not what its printing

@KingdomDTF Год назад

Probably the printer is not seen there is a film there. Try to put masking pate on the back of the film so the printer can be recognized there is something there. That can happen with some printers like xp15000 or et-8580, but not with printers like L1800, p400, p600, and others.

@ivanrichman8083 9 месяцев назад

I installed CadLink 11 and my Epson 8550. I get my graphic up. I resize it to a 10x10 print but when I hit Print it does not start printing. What am I doing wrong?

@jg6music48 7 месяцев назад

What does it say? Are you using dtf film?

@18primo Год назад

Hi, I have a problem if you can help me please, it is printing just the middle of the image instead of the full image I don't know why, can you help me please?

@jace2077 Год назад

Im having the same issue not sure how to fix

@18primo Год назад

@@jace2077 somebody told me to uninstall and reinstall cadlink and I did and it worked. But I made a print and the colors came out bright than the image I don't know why

@deazire3914 Год назад

I figured it out it has to do with the paper reader sensor I use 2 pieces of painters tap from side to side of the paper I place it on the side I’m not printing on or Matt side of you will that fixed that issue for me

@MariaM-oy9dw 4 месяца назад

Hello, hopeful someone could help me I do the set in order but it is grayed out how can I get this option to select my ink order? I can print but it won’t come out with the white in at all or the white coating on the back.

@KingdomDTF 2 месяца назад

Install the correct driver with v2. L1800 v2, xp15000 v2, 8550 v2, etc. you are using.

@GenX.1972 Год назад

What do I do when my set ink order option is greyed out?

@KingdomDTF Год назад

You need to install the driver of the printer so you can set up correctly.

@amberbernicke7956 Год назад

hey this video is not to found how to install and set up your printer in digital factory DTF edition why is it gone i need help with my printer

@KingdomDTF Год назад

Yes, we have many videos in our channel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uf16_tLTXI8.html

@gloriaaguayo9240 Год назад

the program is not able to find my Epson ET-8550 only the Epson ET 7500

@KingdomDTF Год назад

I'm sure ET-8550 is there, we sell this software and many customers have ET-8550. It will show as ET-8550 DTF v2

@sherrybaze827 Год назад

How do you print white on just your image? My entire page was filled with white

@KingdomDTF Год назад

design need to have transparent background.

@itsjrj Год назад

My set ink order is greyed out. How can I fix in order to setup ink correctly?

@KingdomDTF Год назад

On cadlink if I'm not mistaken when you install the driver the ink order is already set up.

@itsjrj Год назад

@@KingdomDTF mine was setup differently but I ended up figuring it out

@tenajahrouse72 7 месяцев назад

Same thing is happening to me.. I have Mac. Cab you help ? I purchased thru you

@itsjrj 7 месяцев назад

@@tenajahrouse72 I hear it's not compatible with Mac.

@laszlofeiszes5671 Год назад

Hi, im new to dtf i have a modified epson 3880, but my colors are way off, or its darker than on screen, i see lot of people print very nice prints and vibrant colors without icc profile, but i cant get good prints, i use inkbank inks and default settings i tried 1440x1440 ( the print quality is better than 1440x720 but very very slow) 1440x720 the speed is amazing but prints come out very grainy, maybe you can have some solutions to my issue , im ready to pay for someone who can help me to set up the software, thank you

@KingdomDTF Год назад

3880 is similar printer as R2000 and they print better in 1440x1440. I can say make an icc profile for that printer, inks and films you are using.

@MichelleFulk-gd6os Год назад

I am getting a error “can’t connect” while trying to print or test print from cadlink.

@KingdomDTF 11 месяцев назад

Need to check the setup of the port, USB or IP.

@angelgreen4860 Год назад

I have an xp15000, i have followed all the videos and directions but I can't print, it goes through the whole process but no ink comes out, what am i doing wrong?

@anoraleteu8594 Год назад

did u find a solution? sort of having the same problem

@KingdomDTF Год назад

when is new, you need to do an ink charge so the inks coming out. If is not new and you use already, do maintenance on the printhead, if left without cleaning can clog white channel.

@kacemoon Год назад

Is Cadlink only for PC and not Mac?

@KingdomDTF Год назад

Correct. Now, to be able to use on mac you need a second software call parallels, you can read more about it here kingdomdtf.com/collections/software/products/parallels-for-mac