Purchase Link: www.aliexpress.com/store/product/433-Mhz-Wireless-Remote-Control-Copy-code-433Mhz-Transmitter-for-Universal-Gate-Garage-Electric-Cloning-Door/1456073_32661189051.html?
How to Program :
Step 1- delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted !
Step 2 - clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
Tips
Some remote control has a smaller transmitting power, so the original remote control should be placed back to back the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.
25 янв 2017
