How to Use Slide End Tubes for Miyuki Delica Bead Weaving

Подписаться 673 тыс.

Просмотров 99 тыс.

50% 1

beadaholique.com - In this video, learn how to use slide end tubes to finish square stitch or loom woven size 11/0 Miyuki Delica seed beads.
Designer: Megan Milliken
You can find the supplies in this video at Beadaholique.com
Miyuki Findings Gold Plated Seed Bead Slide End Tubes 20mm (2)
SKU: FCO-9090
beadaholique.c...
Miyuki Findings Gold Plated Seed Bead Slide End Tubes 15mm (2)
SKU: FCO-9092
beadaholique.c...
Miyuki Findings Silver Tone 2 Loop Seed Bead Slide End Tubes 35mm (2)
SKU: FCO-9094
beadaholique.c...
Miyuki Findings Silver Tone 2 Loop Seed Bead Slide End Tubes 60mm (2)
SKU: FCO-9096
beadaholique.c...
Miyuki Findings Gold Plated 2 Loop Seed Bead Slide End Tubes 60mm (2)
SKU: FCO-9095
beadaholique.c...
Miyuki Findings Gold Plated 2 Loop Seed Bead Slide End Tubes 35mm (2)
SKU: FCO-9093
beadaholique.c...
Miyuki Delica Seed Beads, 11/0 Size, 7.2 Grams, Matte Transparent Kelly Green DB776
SKU: DB-776
beadaholique.c...
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
SKU: XTL-0020
beadaholique.c...
Beadalon Large Beading Mats - Prevent Bead Rolling 13 X 18 Inch (Set of 2)
SKU: XTL-9935
beadaholique.c...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@brittpadgitt2970 2 года назад

Thank you very much for this tutorial I actually had the hardest time figuring out how to put some kind of clasp at the end of my bead woven jewelry and I didn't even know that those were for the bead woven jewelry. This was a very easy tutorial to follow and didn't take forever with a bunch of talking you got right to the point so thank you. Also the fact that their are dislikes on this video just seem ridiculous and shows that there are people that just want to be negative Nelly's for absolutely no reason. Id really like to understand why someone would dislike this video is there a hidden message or something that is bad? If you didn't like the video MOVE ON TO THE NEXT ONE.

@beadaholique 2 года назад

Thanks Britt! We're not too worried about a few dislikes, we've noticed that seemingly every video gets a few dislikes early on matter how popular it goes on to be. Honestly I think some of those clicks comes from spam accounts trying to trick RU-vid into looking like active members of the community. We're not perfect, but we know when we've made a good video that helps people and this one's been a hit over the years.

@brittpadgitt2970 2 года назад

@@beadaholique oh I didn't know that was actually a thing people do. Never even thought of it being a scam I guess I just automatically thought it was people just being negative and I think that shows how negative people have become these days. It's sad when that's the first thing I think of. Well I'm very glad you don't let it get to you. Thank you for your video I liked it very much and the dislikes that are real people don't have a clue.

@72devorah 4 года назад

How do I weave in all that thread? That’s connecting it to the loom?

@daisy3690 11 лет назад

you demonstrate so many handy and innovative items. thank you so much for sharing! Bye

@beadaholique 11 лет назад

Technically, they would slide on to the ladder stitch, yes. My concern is that they would only be anchored to the ends of the rows, and with ladder stitch wide enough to fit these findings, it may gap away from the tube in the middle.

@beadaholique 11 лет назад

The reason this works on loom work or square stitch is that there is a straight channel between the rows. With peyote stitch, there isn't a clear channel between rows, so a finding like this would hit every other bead. I have heard of some people that use ribbon crimps to finish peyote, but you would need to be really careful that you didn't tighten it too much and break some of the beads.

@charitymharrison 11 лет назад

Good to know. I wondered if it would work or not due to the bead orientation. Ladder stitch they don't lay on their side so I guess nothing to really grip them with. Thanks for the quick response.

@IMRad4JC 5 лет назад

I wish they made sizes in-between the 35mm and the 60mm, because I have a loomed piece (29 Delica 11/0 wide) that is 43mm wide, and don't know what type and size clasp to use! :)

@beadaholique 11 лет назад

Yes we do. The links for the supplies in this video are located in the video description underneath this video.

@StephanieSharp2 8 лет назад

I wish these came in more sizes. They don't appear to have a 40mm size and 50mm size. It jumps from 35mm to 60mm. So, you need to get these in more sizes, please, if they ever become available. Also, a beading friend of mine said she used this with a peyote piece, all she did was grab the up beads with the slider tube. I have yet to try this myself, however. But, just wanted to pass that along.

@LindaTCornwall 8 лет назад

Can I just make a suggestion, it's actually easier to finish closing it by pushing it onto the table top. x I wish you could buy these for seed beads :(

@beadaholique 11 лет назад

If you are wanting to attach a clasp to both ends, yes.

@alikc25 11 лет назад

Great Idea.

@beadaholique 11 лет назад

Yes, as I said, these findings are designed for size 11/0 Miyuki Delica beads. They won't work with other types or sizes.

@joannewton 11 лет назад

Looks great. Is there anything similar suitable for a peyote stitch?

@gloriathomas9873 6 лет назад

Could I do the same using a square stitch as I have trouble with looming, can't seem to finish it if securely enough. They pull apart mind I'm still fairly new stuff this. Thanks for your great videos 💅

@emmaknight111 11 лет назад

Thank you

@jolandaversteeg9464 6 лет назад

Hi, can I use 15/0 delica's? Maybe with some glue? Thanks you so much for all the video's. Greetings from the Netherlands. Jolanda.

@beadaholique 6 лет назад

It should work with beads that are 2mm or smaller but they are designed specifically for miyuki delicas

@scarletjamison2924 5 лет назад

Is there a clasp for bracelets 8 beads wide ? What would be the best closure for narrow bracelets ? Thank you

@beadaholique 5 лет назад

Hi ! Please watch this video www.beadaholique.com/how-to-attach-tube-clasps-to-peyote-bead-weaving.html . You can also email us at service@beadaholique.com with the specific beads you are using so we can further assist you.

@tadpole53 7 лет назад

Can you make a video or link me to a video showing how to weave in the ends of a piece? I watched this video and your video on how to attach two pieces together to make a longer piece, and in that video as well they mentioned that they had woven in the ends to give it a clean finish. I didn't know how to do that, so I searched how to, and couldn't find it. I tried by myself and just ended up messing up the whole thing I tried to make :(

@beadaholique 7 лет назад

Our video on how to finish bead weaving piece can be found here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xn-8T7pM0cY.html Thanks for watching!

@shiney8919 4 года назад

Love these fittings what fittings do you suggest for loom weaved bracelets using miyuki delicas 11/0 please

@beadaholique 4 года назад

The findings used in the video are perfect for 11/0 Miyuki Delicas. Here is a direct link to them on our site: beadaholique.com/search?type=product&q=Miyuki+Findings+slide+end+tubes&_=pf&pf_v_brand=Miyuki Thank you.

@beadaholique 11 лет назад

You can get them on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.

@KathleenWHempaliciousWishes 8 лет назад

Do they make these for 6/0 beads and if so where can I find them?

@beadaholique 8 лет назад

We have not seen these exact ones for 6/0 beads but there are these ones here which have a similar design: www.beadaholique.com/nsearch.aspx?page=1&keywords=beadalon&x=21&y=15&ShowPics=1&refine=y&Brand=Beadalon&Category=FINDINGS&Subcategory1=Clasps&Subcategory2=Lobster+Clasps&Price=%243+to+%245 The clasp is 5mm in diameter and a 6/0 seed bead is usually around 4mm in diameter. These clasps will work with smaller beads too.

@conniealford1020 5 лет назад

Great video. May I ask... Can you use these for other than what you stated? Like, using them for leather ends, or other seed beads? Just wanted to know bci have allot of them. 😁. Thank you for your reply. 🌫️💜🌫️☮️✌️☯️🙏

@beadaholique 5 лет назад

They are made specifically for Miyuki 11/0 Delicas, so they can go on beads that are the same size or smaller. Thank for watching!

@teresa3049 Год назад

Is there anything similar you could use to hang a small finished peyote picture that’s just over 3” wide. I thought I came across something some time ago and can’t remember what it was called. It was a metal tube like the one you showed her. Thanks in advance for your help.

@beadaholique Год назад

Hi! The only thing I can think of is if you tried to hang it from several of these and just cut off what would become the middle tabs. I have not seen a slide tube that is that long before - but it would be cool!

@teresa3049 Год назад

@@beadaholique That sounds like an idea. I’m still researching other possible ideas. Thank you so much for getting back to me so quickly. I agree it would be cool to have longer ones. An adjustable one sounds even better. Just not sure how that would work.

@ashadominicafernandes3138 4 года назад

Canwe use this clasp for completing bracelet or necklaces. Is it easy to use. Pls let me know. For what is best used for . Thankyou.

@beadaholique 4 года назад

We recommend these tubes for bracelets. Thanks for watching!

@ddawn23 9 лет назад

The longer tubes have two loops at each end. What sort of clasp would you suggest to finish a wider bracelet that had the two loops?

@beadaholique 9 лет назад

ddawn23 I think you can pretty much use whatever clasp you want and to get to the clasp, you can build a little chain of jump rings from the loops on the slide ends. www.beadaholique.com/t-ba-project-B2118.aspx?RU-vid& This example ends up using 2 toggle rings but you could easily just link the jump rings to a single clasp.

@emmaknight111 11 лет назад

Does it matter what size the bead is and the tube

@IAMGiftbearer 10 лет назад

Wow! That really gives a high end look! I need to get some of those! How many come in a package?

@beadaholique 10 лет назад

You get 2 Tube Ends (1 Pair). You can get the supplies featured in our videos on Beadaholique.com's website. The links for the supplies in this video are located in the video description underneath this video.

@charitymharrison 11 лет назад

would these work with a ladder stitch?

@chiicitace6418 7 лет назад

hi ^^ please tell me how did you finish the bracelet. the threads

@beadaholique 7 лет назад

Our video on how to finish bead weaving piece can be found here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xn-8T7pM0cY.html Thanks for watching!

@claudialena1340 2 года назад

@@beadaholique i did make a huge work on a loom, now i have the threads at the end, i don't wanna glue! and i don;t gonna saw it on fabric! if i knot it, do i have enough space to put the miyuki delica in the tubes? i'm afraid it wil not fit. i use C-lon D and miyuki thread to weav..... HELP PLEASE..... 😃

@whoseeswho Год назад

What do you suggest for peyote stitch? its the one I use the most and Im having a very hard time with endings. TIA

@beadaholique Год назад

Peyote stitch is definitely a challenge because of the staggered ends. I have been working on an idea on how to make it work with these types of tube ends but I am still trouble shooting the concept. You can use ribbon slide ends. Here is a video beadaholique.com/products/how-to-attach-a-ribbon-slide-end-to-peyote-bead-weaving. I hope this helps!

@whoseeswho Год назад

@@beadaholique I actually found a tutorial that shows just basically adding a bead beside your last row of beads to make it work with these clasps. I have done that a few times now and it seems to be working great!

@hecatebrujita 11 лет назад

gracias por compartir preciosa un beso

@vj563 10 лет назад

Do they make things like this for other size seed beads?

@beadaholique 10 лет назад

These types of ends will only work with a cylinder bead that is very uniform in size, like a Delica. Even in a different size, round seed beads with less uniformity would not work with something like this because they need to fit just right.

@krylee 11 лет назад

where do you get these slide end tubes? Do you have an item number?

@winningnumbers 3 года назад

I need a slide clasp for 6/0 beads and cannot find one. suggestions please help thank you

@beadaholique 3 года назад

We have slide clasps that you can actually pry open to accommodate 6/0 seed beads: beadaholique.com/products/slide-connectors-with-extension-clasps-26x5mm-2-sets-silver You can see the result in this project here: beadaholique.com/products/alicorn-loom-bracelet

@winningnumbers 3 года назад

@@beadaholique Thank you

@beadaholique 3 года назад

@@winningnumbers Glad to help!