How to Use StarCraft Electa Foil and Siser Adhesive HTV Tutorial | 143VINYL 

I listened to two of your videos today before attempting this. I had a total craft failure. I am using an Easy Press because I do not have a heat press . Some of the adhesive came off when I pulled off the carrier sheet. Can you heat this step too long? What setting do you use to cut the adhesive in Cricut Design Space? I would also like the information on care of shirt after I complete the shirt assuming I can figure what I did wrong with the adhesive .

Care Instructions: Do not dry clean. Machine wash COLD / mild detergent.; No chlorine bleach. Wait 24 hours before first wash. Wash inside out.

There is not yet! But I will add one soon so I can show you how that works! It is definitely possible to do, but it is tricky.

Did you ever make a multi color foil video? At least 2 different colors

Just cut the different pieces you want in different colors

Starcraft adhesive works also

Yes, you can.

@@sadamsdykes thank you so much!

It works with both cotton and polyester.

what was the answer

Yes you can! You must print with black toner from a laser printer first. Then you can pass the piece of paper through a laminator with the StarCraft foil on top, and when it passes through the laminator you can rip off the excess foil and it will stick.

Care Instructions: Do not dry clean. Machine wash COLD / mild detergent.; No chlorine bleach. Wait 24 hours before first wash. Wash inside out.

I used a roller and it came off clean

The design is from DesignBundles.net

A cricut or silhouette cutting machine

yes

This is only the process for StarCraft foil. I believe Cricut's foil is one step.

@@143VINYL do you need the heat transfer if you are using the foil to make clear foil stickers? Usually the foil sticks to the toner, but you need and additional tacky surface for ir to adhere or should this foil work fine for the foil stickers?